SIST EN ISO 13397-4:2000
(Main)Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997)
Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997)
Parodontalküretten, Zahnreiniger und Exkavatoren - Teil 4: Zahnärztliche Exkavatoren - Runder Typ (ISO 13397-4:1997)
Dieser Teil der ISO 13397 beschreibt die Maße für zahnärztliche Exkavatoren mit rundem Arbeitsende.
Curettes parodontales, instruments dentaires pour détartrageet excavateurs dentaires - Partie 4: Excavateurs dentaires -Type discoide (ISO 13397-4:1997)
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) la référence à l'ISO/IEC 24702 a été remplacée par la référence à la nouvelle ISO/IEC 11801-3, ce qui a un impact sur le Tableau 2;
b) certains termes et abréviations ont été modifiés à l'Article 3;
c) les Paragraphes 4.1.2, 4.4.2.5, 4.4.3.4.1 et 5.7 ont été mis à jour;
d) la Figure 2 et la Figure 3 ont été mises à jour. La Figure 13, la Figure 16, la Figure 30 et la Figure 49 ont été ajoutées;
e) le Tableau 7 a été mis à jour;
f) l'Annexe D et l'Annexe M ont été développées afin de couvrir des familles de profils de communication supplémentaires. L'Annexe H a été développée pour couvrir l'utilisation du connecteur M12-8 codage X;
g) l'Annexe O a été modifiée en intégrant des références à la nouvelle édition de la série ISO/IEC 11801, à l'ISO/IEC TR 11801-9902 et à l'ISO/IEC 14763-4;
h) l'Annexe P a été ajoutée.
La présente norme doit être utilisée conjointement avec la série IEC 61784-5 en ce qui concerne l’installation des profils de communication (CP).
Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997)Parodontalküretten, Zahnreiniger und Exkavatoren - Teil 4: Zahnärztliche Exkavatoren - Runder Typ (ISO 13397-4:1997)Curettes parodontales, instruments dentaires pour détartrageet excavateurs dentaires - Partie 4: Excavateurs dentaires -Type discoide (ISO 13397-4:1997)Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997)11.060.20Dental equipmentICS:Ta slovenski standard je istoveten z:EN ISO 13397-4:1997SIST EN ISO 13397-4:2000en01-januar-2000SIST EN ISO 13397-4:2000SLOVENSKI
STANDARD
SIST EN ISO 13397-4:2000
SIST EN ISO 13397-4:2000
SIST EN ISO 13397-4:2000
AReference numberISO 13397-4:1997(E)INTERNATIONALSTANDARDISO13397-4First edition1997-12-15Periodontal curettes, dental scalers andexcavators —Part 4:Dental excavators — Discoid typeCurettes parodontales, instruments dentaires pour détartrage etexcavateurs dentaires —Partie 4: Excavateurs dentaires — Type discoïdeSIST EN ISO 13397-4:2000
ISO 13397-4:1997(E)©
ISO 1997All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, including photocopying andmicrofilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · SwitzerlandInternetcentral@iso.chX.400c=ch; a=400net; p=iso; o=isocs; s=centralPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.International Standard ISO 13397-4 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee 4,Dental instruments.ISO 13397 consists of the following parts, under the general title Periodontal curettes, dental scalers andexcavators:¾ Part 1: General requirements¾ Part 2: Periodontal curettes — Gr-type¾ Part 3: Dental scalers — H-type¾ Part 4: Dental excavators — Discoid-typeIt is anticipated that additional types of instruments will form the subject of future parts.SIST EN ISO 13397-4:2000
INTERNATIONAL STANDARD
© ISOISO 13397-4:1997(E)1Periodontal curettes, dental scalers and excavators —Part 4:Dental excavators — Discoid type1 ScopeThis part of ISO 13397 specifies the dimensions for dental excavators with discoid working ends.2 Normative referencesThe following standards contains provisions which, through reference in this text, constitute provisions ofthis part of ISO 13397. At the time of publication, the editions indicated were valid. All standards are subjectto revision, and parties to agreements based on this part of ISO 13397 are encouraged to investigate thepossibility of applying the most recent editions of the standards indic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.