SIST ISO 4384-1:2020

Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials

This document specifies parameters for the hardness testing of compound materials for plain bearings made from steel and bearing metal with bearing metals based on copper and aluminium, manufactured by casting, sintering or bonding. It represents a supplement to the existing ISO publications on hardness testing and, therefore, includes only the extensions and restrictions to be observed compared to those publications.
The measuring method applied depends on the bearing metal layer thickness, its hardness and its structure.

Paliers lisses - Essai de dureté des matériaux antifriction

Drsni ležaji - Preskušanje trdote materialov za ležaje - 1. del: Kompozitni materiali

General Information

• Status: Published
• Publication Date: 08-Jul-2020
• ICS: 21.100.10 - Plain bearings
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Jun-2020
• Due Date: 29-Aug-2020
• Completion Date: 09-Jul-2020
• Ref Project: ISO 4384-1:2019 - Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials

Relations

• Revised: SIST ISO 4384-1:2015 - Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
• Effective Date: 23-Apr-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 4384-1:2020
01-oktober-2020
Drsni ležaji - Preskušanje trdote materialov za ležaje - 1. del: Kompozitni materiali
Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings
materials
Paliers lisses - Essai de dureté des matériaux antifriction
Ta slovenski standard je istoveten z: ISO 4384-1:2019
ICS:
21.100.10 Drsni ležaji Plain bearings
SIST ISO 4384-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 4384-1:2020

---------------------- Page: 2 ----------------------
SIST ISO 4384-1:2020
INTERNATIONAL ISO
STANDARD 4384-1
Fourth edition
2019-02
Plain bearings — Hardness testing of
bearing metals —
Part 1:
Multilayer bearings materials
Paliers lisses — Essai de dureté des matériaux antifriction —
Partie 1: Matériaux multicouches pour paliers lisses
Reference number
ISO 4384-1:2019(E)
©
ISO 2019

---------------------- Page: 3 ----------------------
SIST ISO 4384-1:2020
ISO 4384-1:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 4384-1:2020
ISO 4384-1:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Specimen . 1
5 Procedure. 1
6 Test report . 2
© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
SIST ISO 4384-1:2020
ISO 4384-1:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on t
...

INTERNATIONAL ISO
STANDARD 4384-1
Fourth edition
2019-02
Plain bearings — Hardness testing of
bearing metals —
Part 1:
Multilayer bearings materials
Paliers lisses — Essai de dureté des matériaux antifriction —
Partie 1: Matériaux multicouches pour paliers lisses
Reference number
ISO 4384-1:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 4384-1:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4384-1:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Specimen . 1
5 Procedure. 1
6 Test report . 2
© ISO 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 4384-1:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) p
...