SIST EN 4604-002:2010
(Main)Aerospace series - Cable, electrical, for signal transmission - Part 002 : General
Aerospace series - Cable, electrical, for signal transmission - Part 002 : General
This standard specifies the list of product standards and common characteristics of signal transmission electrical cables for use in the on-board electrical systems of aircraft.
Luft- und Raumfahrt - Elektrische Leitungen fur Signalubertragungen - Teil 002: Allgemeines
Diese Norm legt die Liste der Produktnormen und die allgemeinen Eigenschaften von elektrischen Leitungen
für Signalübertragungen zur Verwendung in Bordnetzen von Luftfahrzeugen fest.
Série aérospatiale - Câbles électriques pour transmission de signaux - Partie 002: Généralités
Aeronavtika - Kabli, električni, za prenos signala - 002. del: Splošno
Ta standard opredeljuje spisek proizvodnih standardov in skupnih značilnosti električnih kablov za prenos signala za uporabo v električnih sistemih na krovu zračnih plovil.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ORãQRLuft- und Raumfahrt - Elektrische Leitungen fur Signalubertragungen - Teil 002: AllgemeinesSérie aérospatiale - Câbles électriques pour transmission de signaux - Partie 002: GénéralitésAerospace series - Cable, electrical, for signal transmission - Part 002 : General49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4604-002:2009SIST EN 4604-002:2010en01-januar-2010SIST EN 4604-002:2010SLOVENSKI
STANDARDSIST EN 4604-002:20091DGRPHãþD
SIST EN 4604-002:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4604-002
September 2009 ICS 49.060 Supersedes EN 4604-002:2006English Version
Aerospace series - Cable, electrical, for signal transmission - Part 002: General
Série aérospatiale - Câbles électriques pour transmission de signaux - Partie 002: Généralités
Luft- und Raumfahrt - Elektrische Leitungen fur Signalubertragungen - Teil 002: Allgemeines This European Standard was approved by CEN on 20 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4604-002:2009: ESIST EN 4604-002:2010
EN 4604-002:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .5 4 List of product standards .5 5 Materials and construction .5 6 Identification and marking .6 7 Technical specification .6
SIST EN 4604-002:2010
EN 4604-002:2009 (E) 3 Foreword This document (EN 4604-002:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4604-002:2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.