SIST EN 10028-4:2003

Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

This EN 10028-4 specifies requirements for flat products for pressure equipment made of nickel alloy steels as specified in Table 1.
The requirements and definitions of EN 10028-1:2000 also apply.

Flacherzeugnisse aus Druckbehälterstählen - Teil 4: Nickellegierte kaltzähe Stähle

Diese Europäische Norm enthält die Anforderungen an Flacherzeugnisse für Druckbehälter aus den nickellegierten Stählen, die in Tabelle 1 festgelegt sind.
Zusätzlich gelten die Anforderungen und Begriffe in EN 10028-1:2000.

Produits plats en aciers pour appareils a pression - Partie 4: Aciers alliés au nickel avec caractéristiques spécifiées a basse température

Ploščati jekleni izdelki za tlačne posode – 4. del: Jekla, legirana z nikljem, s specificiranimi lastnostmi pri nizkih temperaturah

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2003
• Withdrawal Date: 12-Jul-2009
• ICS: 77.140.30 - Steels for pressure purposes
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-Jul-2009
• Due Date: 02-Aug-2009
• Completion Date: 13-Jul-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10028-4:2003 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

Relations

• Replaces: SIST EN 10028-4:1997 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
• Effective Date: 01-Dec-2003
• Replaced By: SIST EN 10028-4:2009 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
• Effective Date: 01-Sep-2009
• Corrected By: SIST EN 10028-4:2003/AC:2006 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
• Effective Date: 01-Feb-2006

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature propertiesProduits plats en aciers pour appareils a pression - Partie 4: Aciers alliés au nickel avec caractéristiques spécifiées a basse températureFlacherzeugnisse aus Druckbehälterstählen - Teil 4: Nickellegierte kaltzähe StähleTa slovenski standard je istoveten z:EN 10028-4:2003SIST EN 10028-4:2003en77.140.5077.140.30ICS:SIST EN 10028-4:19971DGRPHãþDSLOVENSKI
STANDARDSIST EN 10028-4:200301-november-2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10028-4June 2003ICS 77.140.30; 77.140.50Supersedes EN 10028-4:1994English versionFlat products made of steels for pressure purposes - Part 4:Nickel alloy steels with specified low temperature propertiesProduits plats en aciers pour appareils à pression - Partie4: Aciers alliés au nickel avec caractéristiques spécifiées àbasse températureFlacherzeugnisse aus Druckbehälterstählen - Teil 4:Nickellegierte kaltzähe StähleThis European Standard was approved by CEN on 20 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10028-4:2003 E

Guidelines for heat treatment.10Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.11Bibliography.12
...