Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics

This standard defines the means for evaluating the acoustic durability of Road Traffic Noise Reducing Devices.
In this standard, the sound absorption is characterised by the sound reflection index DLRI as defined in CEN/TS 1793-5. The airborne sound insulation is characterised by the airborne sound insulation index DLSI as defined in CEN/TS 1793-5.

Lärmschutzeinrichtungen an Straßen - Verfahren zur Bewertung der Langzeitwirksamkeit - Teil 1: Akustische Eigenschaften

Diese Norm legt die Verfahren zur Beurteilung der akustischen Beständigkeit von Lärmschutzeinrichtungen an Straßen fest.
In dieser Norm ist die Schallabsorption gekennzeichnet durch den Schallreflexionsindex DLRI nach CEN/TS 1793 5. Die Luftschalldämmung ist gekennzeichnet durch den Index der Luftschalldämmung DLSI nach CEN/TS 1793 5.

Dispositifs de réduction du bruit du trafic routier - Méthodes d'évaluation des performances a long terme - Partie 1 : Caractéristiques acoustiques

La présente norme définit les moyens d'évaluer la durabilité acoustique des dispositifs de réduction du bruit du trafic routier.
Dans la présente norme, l'absorption acoustique est caractérisée par l'indice de réflexion acoustique DLRI défini dans le CEN/TS 1793-5. L'isolation aux bruits aériens est caractérisée par l'indice DLSI défini dans le CEN/TS 1793-5.

Protihrupne ovire za cestni promet - Postopki za ocenjevanje učinkovitosti na daljavo - 1. del: Akustične lastnosti

General Information

Status
Withdrawn
Publication Date
05-Aug-2008
Withdrawal Date
04-Aug-2015
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Aug-2015
Due Date
26-Aug-2015
Completion Date
05-Aug-2015

Relations

Buy Standard

Standard
EN 14389-1:2008
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14389-1:2008
01-september-2008
3URWLKUXSQHRYLUH]DFHVWQLSURPHW3RVWRSNL]DRFHQMHYDQMHXþLQNRYLWRVWLQD
GDOMDYRGHO$NXVWLþQHODVWQRVWL
Road traffic noise reducing devices - Procedures for assessing long term performance -
Part 1: Acoustical characteristics
Lärmschutzeinrichtungen an Straßen - Verfahren zur Bewertung der Langzeitwirksamkeit
- Teil 1: Akustische Eigenschaften
Dispositifs de réduction du bruit du trafic routier - Méthodes d'évaluation des
performances a long terme - Partie 1 : Caractéristiques acoustiques
Ta slovenski standard je istoveten z: EN 14389-1:2007
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 14389-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14389-1:2008

---------------------- Page: 2 ----------------------

SIST EN 14389-1:2008
EUROPEAN STANDARD
EN 14389-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 93.080.30

English Version
Road traffic noise reducing devices - Procedures for assessing
long term performance - Part 1: Acoustical characteristics
Dispositifs de réduction du bruit du trafic routier - Méthodes Lärmschutzeinrichtungen an Straßen - Verfahren zur
d'évaluation des performances à long terme - Partie 1 : Bewertung der Langzeitwirksamkeit - Teil 1: Akustische
Caractéristiques acoustiques Eigenschaften
This European Standard was approved by CEN on 21 October 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14389-1:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14389-1:2008
EN 14389-1:2007 (E)
Contents
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
3.1 structural elements.5
3.2 acoustic elements.5
4 Requirements.5
4.1 General.5
4.2 Declaration of the expected durability of acoustic performance .6
4.3 Assessment of actual acoustic durability by descriptive methods .7
4.4 Assessment of actual durability by performance testing in situ.7
5 Report .8
5.1 Reporting Requirements.8
5.2 Declaration of expected acoustic durability .8
5.3 Assessment of actual acoustic durability by descriptive methods .8
5.4 Assessment of actual acoustic durability by performance testing in-situ.8
6 No performance determined (option) .9
Bibliography .10


2

---------------------- Page: 4 ----------------------

SIST EN 14389-1:2008
EN 14389-1:2007 (E)
Foreword
This document (EN 14389-1:2007) has been prepared by Technical Committee CEN/TC 226 “Road equipment”,
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by
June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CEN shall not be held responsible for identifying any or all such patent rights.
This document should be read in conjunction with:
 EN 14389-2, Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2:
Non-acoustical characteristics;
 CEN/TS 1793-5, Road traffic noise reducing devices - Test method for determining the acoustic performance -
Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation;
 EN 14388, Road traffic noise reducing devices - Specifications;
 EN 60721-3-4, Classification of environmental conditions – Part 3: Classification of groups of environmental
parameters and their severities. Section 4: Stationary use at non-weatherprotected locations (IEC 60721-3-
4:1995).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.


3

---------------------- Page: 5 ----------------------

SIST EN 14389-1:2008
EN 14389-1:2007 (E)
Introduction
Road Traffic Noise Reducing Devices alongside roads are not only required to fulfil their acoustic function and
structural design requirements in accordance with appropriate European Standards, but also to maintain their
performance for a reasonably economic working life.
The acoustic elements have to resist the actions of agents within the roadside environment that could significantly
degrade their performance.
The acoustic characteristics of a Road Traffic Noise Reducing Device can deteriorate significantly over the duration
of its working life if it is not installed or maintained in accordance with the manufacturer’s recommendations, or if
the materials are not appropriate for the roadside environment.
Until now no methods exist that could be used for the evaluation of the durability of acoustic characteristics of noise
reducing devices. Therefore new methods were introduced in CEN/TS 1793-5, which are designated in this
standard. The use of these methods may produce values for the sound reflection DL of noise reducing devices
RI
that are different from the values of sound absorption DL resulting from EN 1793-1, which are the basis for the
α
product characterisation of absorptive noise reducing devices. These differences should be dis
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.