oSIST prEN 943-2:2012

Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 2: Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET)

This European Standard specifies the minimum requirements, test methods, marking and information supplied by the manufacturer, for chemical protective suits for use by emergency teams (ET), including component parts such as gloves, bootees and boots which may be specified elsewhere. It describes personal protective ensembles to be worn during hazardous materials activities involving solid, liquid, gaseous and particulate hazards only. This standard does not establish minimum criteria for protection for non-chemical hazards, e.g. radiological, fire, heat, explosive hazards. This type of equipment is not intended for total immersion in liquids. The seams, joins and assemblages attaching the accessories are included within the scope of this standard. The performance criteria for the accessories, gloves, boots or respiratory protective equipment are given in other European Standards.

Schutzkleidung gegen feste, flüssige und gasförmige Chemikalien, einschließlich Flüssigkeitsaerosole und feste Partikel - Teil 2: Leistungsanforderungen für gasdichte (Typ 1) Chemikalienschutzanzüge für Notfallteams (ET)

Diese Europäische Norm legt die Mindestanforderungen, Prüfverfahren, Kennzeichnung und vom Hersteller anzugebenden Informationen für Chemikalienschutzanzüge für Notfallteams (ET) fest, einschließlich der Zubehörteile wie Handschuhe, Füßlinge und Stiefel, die in anderen Normen festgelegt sein können.
Sie beschreibt die persönliche Schutzausrüstung, die während der Tätigkeiten in Verbindung mit gefährlichen Materialien zu tragen ist, bei denen es sich ausschließlich um feste, flüssige, gasförmige und partikuläre Gefährdungen handelt.
Diese Norm legt keine Mindestanforderungen für den Schutz vor nicht chemischen Gefährdungen fest, z. B. Gefährdungen durch Strahlung, Feuer, Hitze, Explosion. Diese Art der Ausrüstung ist nicht für das vollständige Eintauchen in Flüssigkeiten vorgesehen.
Die Nähte, Verbindungen und Verbünde zum Anbringen der Zubehörteile fallen in den Anwendungsbereich dieser Norm. Die Leistungsanforderungen für Zubehörteile, Handschuhe, Stiefel oder Atemschutzgeräte sind in anderen Europäischen Normen angegeben.
ANMERKUNG   Ein gasdichter Anzug, d. h. ein einteiliges Kleidungsstück mit Kapuze, Handschuhen und Stiefeln, der dem Träger beim Tragen mit umluftabhängigem Atemschutzgerät einen hohen Grad an Schutz vor gefährlichen Flüssigkeiten, Partikeln und gasförmigen oder dampfförmigen Schadstoffen bietet.

Vêtements de protection contre les produits chimiques solides, liquides et gazeux, y compris les aerosols liquides et les particules solides - Partie 2: Exigences de performance des combinaisons des protection chimiques étanches aux gaz (Type 1) destinés aux équipes de secours (ET)

La présente Norme européenne spécifie les exigences minimales, les méthodes d'essai, le marquage ainsi que la notice d’information du fabricant, relatifs aux combinaisons de protection chimique pour utilisation par des équipes de secours (ET), y compris les éléments tels que gants, bottillons et bottes qui peuvent être spécifiés ailleurs.
Elle décrit les combinaisons de protection individuelle devant être portées dans le cadre d'activités associées à des matières dangereuses, impliquant uniquement des risques liés aux solides, aux gaz, aux liquides et aux particules.
La présente norme n'établit pas de critères minimum de protection contre les risques non chimiques, par exemple les risques radiologiques, d’incendie, d’explosion ou liés à la chaleur. Ce type d'équipement n'est pas prévu pour une immersion totale dans des liquides.
Les coutures, les jonctions et les assemblages servant à fixer les accessoires sont inclus dans le domaine d'application de la présente norme. Les critères de performance des accessoires, gants, bottes ou appareils de protection respiratoire sont indiqués dans d’autres Normes européennes.
NOTE   La combinaison étanche au gaz est un vêtement d'une seule pièce avec cagoule, gants et bottes qui, lorsqu'il est porté avec un appareil de protection respiratoire autonome, assure à son porteur un niveau élevé de protection contre les particules et les liquides nocifs, ainsi que les contaminants gazeux ou sous forme de vapeur

Varovalna obleka pred tekočimi in plinskimi kemikalijami, vključno s tekočimi aerosoli in trdnimi delci - 2. del: Varnostne zahteve za kemijsko varovalno obleko, neprepustno za plin (tip 1), za reševalne ekipe

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Jan-2013
• ICS: 13.340.10 - Protective clothing
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 03-Aug-2015
• Due Date: 08-Aug-2015
• Completion Date: 03-Aug-2015
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: FprEN 943-2 - Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 2: Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET)

Relations

• Revised: SIST EN 943-2:2002 - Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET)
• Effective Date: 01-Dec-2012
• Revised: SIST EN 943-2:2002 - Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET)
• Effective Date: 18-Jan-2023
• Revised: SIST EN 943-2:2002 - Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET)
• Effective Date: 19-Jan-2023
• Revised: SIST EN 943-2:2002 - Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 943-2:2012
01-december-2012
9DURYDOQDREOHNDSUHGWHNRþLPLLQSOLQVNLPLNHPLNDOLMDPLYNOMXþQRVWHNRþLPL
DHURVROLLQWUGQLPLGHOFLGHO9DUQRVWQH]DKWHYH]DNHPLMVNRYDURYDOQRREOHNR
QHSUHSXVWQR]DSOLQWLS]DUHãHYDOQHHNLSH
Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid
aerosols - Part 2: Performance requirements for gas-tight (Type 1) chemical protective
suits for emergency teams (ET)
Schutzkleidung gegen feste, flüssige und gasförmige Chemikalien, einschließlich
Flüssigkeitsaerosole und feste Partikel - Teil 2: Leistungsanforderungen für gasdichte
(Typ 1) Chemikalienschutzanzüge für Notfallteams (ET)
Vêtements de protection contre les produits chimiques solides, liquides et gazeux, y
compris les aerosols liquides et les particules solides - Partie 2: Exigences de
performance des combinaisons des protection chimiques étanches aux gaz (Type 1)
destinés aux équipes de secours (ET)
Ta slovenski standard je istoveten z: prEN 943-2
ICS:
13.340.10 Varovalna obleka Protective clothing
oSIST prEN 943-2:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 943-2:2012

---------------------- Page: 2 ----------------------
oSIST prEN 943-2:2012


EUROPEAN STANDARD
DRAFT
prEN 943-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2012
ICS 13.340.10 Will supersede EN 943-2:2002
English Version
Protective clothing against solid, liquid and gaseous chemicals,
including liquid and solid aerosols - Part 2: Performance
requirements for gas-tight (Type 1) chemical protective suits for
emergency teams (ET)
Vêtements de protection contre les produits chimiques Schutzkleidung gegen feste, flüssige und gasförmige
solides, liquides et gazeux, y compris les aerosols liquides
Chemikalien, einschließlich Flüssigkeitsaerosole und feste
et les particules solides - Partie 2: Exigences de Partikel - Teil 2: Leistungsanforderungen für gasdichte (Typ
performance des combinaisons des protection chimiques 1) Chemikalienschutzanzüge für Notfallteams (ET)
étanches aux gaz (Type 1) destinés aux équipes de
secours (ET)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 162.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 943-2:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 943-2:2012
prEN 943-2:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 General requirements .5
5 Performance requirements of chemical protective clothing materials .6
5.1 General .6
5.2 Resistance to permeation by chemicals .6
5.3 Protective gloves and safety footwear .8
5.3.1 Protective gloves .8
5.3.2 Safetey footwear .8
5.4 Visor .8
6 Performance requirements for seams, joins and assemblages .8
6.1 Resistance to permeation of closures by chemicals .8
6.2 Attachment points .8
7 Performance requirements for the whole chemical protective suit .9
7.1 General .9
7.2 Leak tightness .9
8 Test methods .9
8.1 Practical performance test .9
8.1.1 General .9
8.1.2 Work simulation tests . 10
8.1.3 Work simulation test at low temperature . 10
8.1.4 Information to be recorded . 11
8.2 Distortion of vision . 11
8.3 Resistance to flame . 12
9 Marking . 12
10 Information supplied by the manufacturer . 12
Annex A (informative) Justification of EN 943-2 chemical test battery . 13
Annex B (informative) Significant technical changes between this document and the previous
edition of this European Standard . 15
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC . 16
Bibliography . 18

2

---------------------- Page: 4 ----------------------
oSIST prEN 943-2:2012
prEN 943-2:2012 (E)
Foreword
This document (prEN 943-2:2012) has been prepared by Technical Committee CEN/TC 162 “Protective
clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 943-2:2002.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
Annex B includes significant technical changes between this document and the previous edition of this
European Standard.
EN 943 consists of the following parts:
EN 943-1: Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid
aerosols — Part 1: Performance requirements for ventilated and non-ventilated gas-tight (Type 1) suits
EN 943-2: Protective clothing against solid, liquid and gaseous chemicals, including aerosols — Part 2:
Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET)
3

---------------------- Page: 5 ----------------------
oSIST prEN 943-2:2012
prEN 943-2:2012 (E)
1 Scope
This European Standard specifies the minimum requirements, test methods, marking and information supplied
by the manufacturer, for chemical protective suits for use by emergency teams (ET), including component
parts such as gloves, bootees and boots which may be specified elsewhere.
It describes personal protective ensembles to be worn during hazardous materials activities involving solid,
liquid, gaseous and particulate hazards only.
This standard does not establish minimum criteria for protection for non-chemical hazards, e. g.
radiological, fire, heat, explosive hazards. This type of equipment is not intended for total immersion in
liquids.
The seams, joins and assemblages attaching the accessories are included within the scope of this standard.
The performance criteria for the accessories, gloves, boots or respiratory protective equipment are given in
other European Standards.
NOTE Gas-tight suit, a one piece garment with hood, gloves and boots which, when worn with self-contained
breathing apparatus provides the wearer a high degree of protection against harmful liquids, particles and gaseous or
vapour contaminants.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 132, Respiratory protective devices. Definitions of terms and pictograms.
EN 374-1, Protective gloves against chemicals and micro-organisms —Part 1: Terminology and performance
requirements.
EN 651, Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification
EN 653, Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification
EN 943-1:2013, Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid
aerosols - Part 1: Performance requirements for ventilated and non-ventilated gas-tight (Type 1) suits
EN 1817, Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor
coverings
ISO/TR 11610, Protective clothing – Vocabulary
EN 13274-2:2001, Respiratory protective devices - Methods of test - Part 2: Practical performance tests
EN 13274-4:2001, Respiratory protective devices - Methods of test - Part 4: Flame tests
EN 14325:2004, Protective clothing against chemicals - Test methods and performance classification of
chemical protective clothing materials, seams, joins and assemblages
EN 15090, Footwear for firefighters
FprEN 61672-1, IEC 61672-1: Electroacoustics - Sound level meters - Part 1: Specifications
4

---------------------- Page: 6 ----------------------
oSIST prEN 943-2:2012
prEN 943-2:2012 (E)
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions in CEN ISO/TR 11610, EN 132 and
in EN 943-1 together with the following apply.
3.1
Type 1a-ET
gas-tight chemical protective suit for use by emergency teams with breathable air supply independent of the
ambient atmosphere, e. g. a self contained open-circuit compressed air breathing apparatus, worn inside the
chemical protective suit
3.2
Type 1b-ET
gas-tight chemical protective suit for use by emergency teams with a breathable air supply, e. g. a self
contained open-circuit compressed air breathing apparatus, worn outside the chemical protective suit
3.3
Attachment point
fixing to the outside of the chemical protective suit to enable equipment required to be fitted, e.g. a torch
4 General requirements
The chemical protective suits type 1a-ET and type 1b-ET shall fulfil the requirements of EN 943-1. Beyond
that the additional or restrictive requirements of this European Standard shall be fulfilled. The performance
class requirements given below are the minimum performance requirements.
NOTE As these chemical protective suits are intended for use in emergency situations it is recommended that the
use of a “pass-thru” on type 1a-ET suits is considered, even though this is an optional requirement.
5

---------------------- Page: 7 ----------------------
oSIST prEN 943-2:2012
prEN 943-2:2012 (E)
5 Performance requirements of chemical protective clothing materials
5.1 General
The chemical protective clothing shall meet the requirements given in Table 1, when tested in preconditioned
condition against the appropriate clause of EN 943-1.
Table 1 — Minimum performance requirements of chemical protective clothing materials
Property Testing reference Robustness I Robustness II
Abrasion resistance EN 943-1 class 4 class 6
Flex cracking resistance EN 943-1 class 1 class 4
Flex cracking resistance at low EN 943-1 class 2 class 2
temperatures (-30°C)
Trapezoidal tear resistance EN 943-1 class 3 class 3
Tensile strength EN 943-1 class 4 class 6
a a
Puncture resistance EN 943-1 class 2 class 3
Resistance to flame EN 943-2 class 3 class 3
8.3
a
If only Class 2 is achieved for puncture resistance the instructions for use shall identify that the chemical protective
clothing may not be suitable for use where there is a high risk of puncture.

Pressure pot end point test shall be used for abrasion, flex cracking and flame resistance testing.
5.2 Resistance to permeation by chemicals
The chemical protective clothing materials refer to EN 943-1, (seams, safety footwear, bootees, gloves and
visor or face piece) if fitted, shall be tested for resistance to permeation against the following liquid and
gaseous standard test chemicals given in table 2.
Table 2 — Chemicals for permeation tests
Type Generic representation
CAS No Physical state under
EG-No standard
environmental
condition
1 Dichloromethane Liquid Chlorinated hydrocarbon
CAS 75-09-2
EINECS 200-838-9
2 Methanol Liquid Primary alcohol
CAS 67-56-1
EINECS 200-659-6
3 n-Heptane Liquid Saturated hydrocarbon
CAS 142-82-5
EINECS 205-563-8
4 Toluene
Liquid Aromatic hydrocarbon
CAS 108-88-3
EINECS 203-625-9
6

---------------------- Page: 8 ----------------------
oSIST prEN 943-2:2012
prEN 943-2:2012 (E)
Table 2 (continued)
Type Generic representation
CAS No Physical state under
EG-No standard
environmental
condition
5 Diethylamine liquid Amine
CAS 109-89-7
EINECS 203-716-3
6 Sodium Hydroxide 40% liquid Inorganic base
CAS 1310-73-2
EINECS 215-185-5
7 Sulphuric Acid 96% liquid Inorganic mineral acid
CAS 7664-93-9
EINECS 231-639-5
8 Ammonia gas Basic gas
CAS 7664-41-7
EINECS 231-635-3
9 Chlorine gas Halogen gas
CAS 7782-50-5
EINECS 231-959-5
10 Hydrogen Chloride gas Inorganic acid gas
CAS 7647-01-0
EINECS 231-595-7
11 Acetone liquid Ketone
CAS 67-64-1
EINECS 200-662-2
12 Acetonitrile liquid Nitrile compound
CAS 75-05-8
EINECS 200-835-2
13 Ethyl Acetate liquid Ester
CAS 141-78-6
EINECS 2005-500-4
14 Carbon Disulphide liquid Sulphur containing organic
CAS 75-15-0
compound
EINECS 200-843-6
15 Tetrahydrofuran liquid Heterocyclic and ether
CAS 109-99-9
compound
EINECS 203-726-8

Any material, seams or component shall achieve class 2, not more than 3 chemicals of 15 (table 2) shall have
class 1.
If class 2 is not achieved for any material or component part tested, the instructions for use shall identify that
this chemical protective suit is not suitable for use for this chemical under continuous exposure.
Where safety footwear also provides the chemical permeation resistance, the test specimen shall be taken
from the thinnest point of the footwear according EN 15090 above the join to the sole.
NOTE The test chemicals identified above have been selected to represent a range of aggressive chemicals so as to
ensure that chemical protective suit which meets the requirements of this European Standard will offer protection against a
wide range of chemicals (Classes and Properties). However, it should be recognised that this approach only provides
basic guidance against groups represented by these chemicals and that the performance against chemicals other than
those listed can only be determined by individual tests. See Annex A.
7

---------------------- Page: 9 ----------------------
oSIST prEN 943-2:2012
prEN 943-2:2012 (E)
5.3 Protective gloves and safety footwear
5.3.1 Protective gloves
Protective gloves shall also meet the requirements of EN 374-1.
NOTE As EN 374-1 has only very limited mechanical and thermal requirements it may be necessary to use an over-
glove e.g. according to EN 659 to provide greater mechanical or thermal protection.
5.3.2 Safetey footwear
Where safety footwear is fitted, it shall also meet the requirements of EN 15090:2012, type 3.
Where safety footwear is not permanently fitted to the chemical protective suit, any external bootee supplied
by the manufacturer shall comply with the requirements of EN 15090:2012, type 3.
NOTE This standard does not require the performance of bootees to match the chemical protective clothing material
and users should be aware that the performance of a bootee may differ from that of the chemical protective clothing
material. Consequently it may be necessary to specify the required levels of performance specifically for the bootees when
procuring chemical protective clothing.
5.4 Visor
The visor shall meet the requirements of EN 943-1:2013, 5.6, as well as the requirements given below.
When tested in accordance with 8.2 the visor shall pass for each chemical listed in 5.2. This test shall only be
carried out with those test chemicals for which the test according to 5.2 has led to any indication of harm to
the visibility.
6 Performance requirements for seams, joins and assemblages
6.1 Resistance to permeation of closures by chemicals
Closures or closure assemblies shall be tested in accordance with 5.2 for each chemical listed in Table 2.
The basic requirement of this clause is for the main closure component (usually a zipper) to be tested for
resistance to permeation. In many cases the closure system includes one
...