iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 623 S1:1998

(Main)

Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV

Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV

Superseded by EN 50393:2006

Bestimmung für Muffen, Endmuffen und Endverschlüsse für Freiluftanlagen für Kabel mit Nennspannungen 0,6/1,0 kV

Spécifications pour jonctions, dérivations, bouts perdus et extrémités extérieures, de câbles de distribution de tension assignée 0,6/1,0 kV

Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV

General Information

Status
Withdrawn
Publication Date
31-Jan-1998
Withdrawal Date
18-May-2009
ICS
29.120.20 - Connecting devices
Technical Committee
IEKA - Electric cables
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-May-2009
Due Date
05-Jun-2009
Completion Date
19-May-2009
Ref Project
HD 623 S1:1996 - Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV

Relations

Amended By
SIST HD 623 S1:1998/A1:2002 - Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV
Effective Date
29-Jan-2023
Amended By
SIST HD 623 S1:1998/A1:2002 - Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV
Effective Date
01-Apr-2002
Replaced By
SIST EN 50393:2006 - Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
Effective Date
29-Jan-2023
Replaced By
SIST EN 50393:2006 - Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
Effective Date
06-May-2014
Replaced By
SIST EN 50393:2006 - Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
Effective Date
07-Jun-2022
Amended By
SIST HD 623 S1:1998/A1:2002 - Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV
Effective Date
07-Jun-2022

Buy Standard

HD 623 S1:1998HD 623 S1:1998
PreviousNext
Standardization document
HD 623 S1:1998
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61238-1-2:2019(Main)
Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors (IEC 61238-1-2:2018)
EN IEC 61238-1-2:2019

This part of EN 61238 applies to insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV), for example according to HD 603 or other buried cables and cables installed in buildings, having
a) conductors complying with EN 60228 having nominal cross-sectional areas between 2,5 mm2 and 300 mm2 for copper and between 16 mm2 and 500 mm2 for aluminium,
b) a maximum continuous cable temperature not exceeding the insulation material properties.
This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact.  
The object of this document is to define the type test methods and requirements, which apply to insulation piercing connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused insulated conductors.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61238-1-3:2019/A11:2019(Amendment)
Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated conductors
EN IEC 61238-1-3:2019/A11:2019

This part of EN 61238 applies to compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV), for example buried cables or cables installed in buildings, having
a) conductors complying with EN 60228 having nominal cross-sectional areas between 2,5 mm2 and 1 200 mm2 for copper and between 16 mm2 and 1 200 mm2 for aluminium, excluding Milliken conductors;
b) a maximum continuous conductor temperature not exceeding 90 °C.
This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact.
The object of this document is to define the type test methods and requirements which apply to compression and mechanical connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused conductors.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61238-1-1:2019(Main)
Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors (IEC 61238-1-1:2018)
EN IEC 61238-1-1:2019

This part of EN 61238 applies to compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV), for example buried cables or cables installed in buildings, having
a)   conductors complying with EN 60228 having nominal cross-sectional areas between 2,5 mm2 and 1 200 mm2 for copper and between 16 mm2 and 1 200 mm2 for aluminium;
b)   a maximum continuous conductor temperature not exceeding 90 °C.
This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact.
The object of this document is to define the type test methods and requirements which apply to compression and mechanical connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused conductors.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61238-1-3:2019(Main)
Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated conductors (IEC 61238-1-3:2018)
EN IEC 61238-1-3:2019

This part of EN 61238 applies to compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV), for example buried cables or cables installed in buildings, having
a) conductors complying with EN 60228 having nominal cross-sectional areas between 2,5 mm2 and 1 200 mm2 for copper and between 16 mm2 and 1 200 mm2 for aluminium, excluding Milliken conductors;
b) a maximum continuous conductor temperature not exceeding 90 °C.
This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact.
The object of this document is to define the type test methods and requirements which apply to compression and mechanical connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused conductors.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50393:2015(Main)
Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
EN 50393:2015

This European Standard details the performance requirements and the test methods for type testing of
cable accessories for use with power distribution cables of rated voltage 0,6/1,0 (1,2) kV as defined in
HD 603 or other relevant cable standards.
Cable accessories covered by this European Standard include joints, stop ends and outdoor
terminations for extruded solid dielectric insulated cables and transition joints between extruded solid
dielectric insulated and impregnated paper insulated cables. Joints, stop ends and outdoor
terminations for impregnated paper insulated cables are not included.
The service operating conditions of accessories should be compatible with the service operating
conditions of cables on which they are to be installed.
Accessories for special applications such as submarine, shipboard, explosive or seismic
environments, or where specified fire performance characteristics are required, are not included.
NOTE 1 This European Standard does not invalidate existing approvals of products achieved on the basis of
national standards and specifications and/or the demonstration of satisfactory service performance. However,
products approved according to such national standards or specifications cannot directly claim approval to this
European standard.
NOTE 2 It may be possible, subject to agreement between supplier and purchaser, and/or the relevant
conformity assessment body, to demonstrate that conformity to the earlier standard can be used to claim
conformity to this European Standard, provided an assessment is made of any additional type testing that may
need to be carried out. Any such additional testing that is part of a sequence of testing cannot be done separately.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62561-1:2023(Main)
Lightning protection system components (LPSC) - Part 1: Requirements for connection components (IEC 62561-1:2023)
EN IEC 62561-1:2023

This part of IEC 62561 specifies the requirements and tests for metallic connection
components that form part of a lightning protection system (LPS). Typically, these can be
connectors, clamps, bonding and bridging components, expansion pieces and test joints.
For the purposes of this document the following connection types are considered as
connection components: exothermic, brazing, welding, clamping, crimping, seaming, screwing
or bolting.
Testing of components for an explosive atmosphere is not covered by this document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60352-6:2023(Main)
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance (IEC 60352-6:2022)
EN IEC 60352-6:2023

This part of IEC 60352 is applicable to insulation piercing connections made with stranded wires
and tinsel wires, insulated flat conductors and flat flexible circuitries for use in electrical and
electronic equipment.
Information on materials and data from industrial experience is included in addition to the test
procedures to provide electrically stable connections under prescribed environmental
conditions.
The object of this document is to:
– determine the suitability of insulation piercing connections under specified mechanical,
electrical, and atmospheric conditions;
– provide a means of comparing test results when the tools used to make the connections, if
any, are of different designs or manufacture.
There are different designs and materials for insulation piercing terminations in use. For this
reason, only fundamental parameters of the termination, the performance requirements of the
conductor and the complete connection are specified in this document.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61914:2022(Main)
Cable cleats for electrical installations (IEC 61914:2021)
EN IEC 61914:2021

This International Standard specifies requirements and tests for cable cleats used for securing cables in electrical installations and for intermediate restraints used for holding cables together in formation in electrical installations. Cable cleats provide resistance to electromechanical forces where declared. This standard includes cable cleats that rely on a mounting surface specified by the manufacturer for axial and/or lateral retention of cables.
NOTE Requirements for manufacturers in this document also apply to importers and responsible vendors where appropriate.
This standard does not apply to cable ties.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61534-21:2014/A1:2021(Amendment)
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting (IEC 61534-21:2014/AMD1:2021)
EN 61534-21:2014/A1:2021

Not available

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61534-22:2014/A1:2021(Amendment)
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation (IEC 61534-22:2014/AMD1:2021)
EN 61534-22:2014/A1:2021

Not available

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day