Bidets - Functional requirements and test methods

This European Standard specifies the functional requirements and test methods for bidets used for domestic purposes and made from either ceramics or stainless steel.
All drawings are examples only, other forms are permissible.
NOTE   For the purposes of this standard the term ‘domestic purposes‘ includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

Sitzwaschbecken - Funktionsanforderungen und Prüfverfahren

Diese Europäische Norm legt Funktionsanforderungen und Prüfverfahren für Sitzwaschbecken für den Hausgebrauch entweder aus Sanitärkeramik oder aus nichtrostendem Stahl fest.
Alle Bilder sind nur beispielhaft; andere Formen sind zulässig.
ANMERKUNG   Der Begriff „für den Hausgebrauch“ in dieser Norm schließt die Verwendung in Hotels, Studentenwohn¬heimen, Krankenhäusern und ähnlichen Einrichtungen ein; ausgenommen ist die medizinische Verwendung.

Bidets - Exigences fonctionnelles et méthodes d'essai

La présente Norme européenne détermine les exigences fonctionnelles et les méthodes d’essai relatives aux bidets à usage domestique, en céramique ou en acier inoxydable.
Toutes les figures ne sont que des exemples, d’autres formes sont admises.
NOTE   Pour les besoins de la présente norme, le terme « à usage domestique » inclut l’utilisation en hôtel, en logement pour étudiants, en hôpitaux et autres bâtiments similaires, sauf si des précautions médicales particulières s’imposent.

Bideji - Funkcionalne zahteve in preskusne metode - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
14-Nov-2017
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
08-Nov-2018
Due Date
13-Nov-2018
Completion Date
08-Nov-2018

RELATIONS

Buy Standard

Amendment
SIST EN 14528:2015/oprA1:2017
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 14528:2015/oprA1:2017
01-november-2017
Bideji - Funkcionalne zahteve in preskusne metode
Bidets - Functional requirements and test methods
Sitzwaschbecken - Funktionsanforderungen und Prüfverfahren
Bidets - Exigences fonctionnelles et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14528:2015/prA1
ICS:
91.140.70 Sanitarne naprave Sanitary installations
SIST EN 14528:2015/oprA1:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14528:2015/oprA1:2017
---------------------- Page: 2 ----------------------
SIST EN 14528:2015/oprA1:2017
DRAFT
EUROPEAN STANDARD
EN 14528:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2017
ICS 91.140.70
English Version
Bidets - Functional requirements and test methods

Bidets - Exigences fonctionnelles et méthodes d'essai Sitzwaschbecken - Funktionsanforderungen und

Prüfverfahren

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 163.

This draft amendment A1, if approved, will modify the European Standard EN 14528:2015. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14528:2015/prA1:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14528:2015/oprA1:2017
EN 14528:2015/prA1:2017 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Modification to the text as a whole ........................................................................................................... 4

2 Modification to Clause 7, "Marking" ......................................................................................................... 4

3 Modification to Clause 8.2.2, "Test samples, testing and compliance criteria" ........................ 4

4 Modification to Annex ZA, "Clauses of this European Standard addressing the

provisions of the EU Construction Products Regulation" ................................................................. 4

---------------------- Page: 4 ----------------------
SIST EN 14528:2015/oprA1:2017
EN 14528:2015/prA1:2017 (E)
European foreword

This document (EN 14528:2015/prA1:2017) has been prepared by Technical Committee CEN/TC 163

“Sanitary appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential characteristics of the EU Construction

Products Regulation.

For relationship with EU Construction Products Regulation, see informative Annex ZA, which is an

integral part of this document.

This document contains the Annex ZA in the format of TF N 687 rev 1 of 2015-06-02 and editorial

modifications as agreed between representatives of EU/DG Growth, CEN/TC 163 and FECS on

2016-07-07 in Brussels for citation as standard in OJEU.
----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.