SIST EN 3545-002:2006

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements

This standard specifies conditions which are common to rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from - 55 °C to 175 °C.
It shall be used together with EN 3545-001.

Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 002: Leistungsdaten und Kontaktanordnungen

Diese Norm legt die gemeinsamen Anforderungen an elektrische Rechtecksteckverbinder, rückseitig abgedichtet und nicht abgedichtet, mit Plastikgehäuse und Verriegelung, für Betriebstemperaturen von ? 55 °C bis 175 °C fest.
Sie ist in Verbindung mit EN 3545 001 anzuwenden.

Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches a l'arriere, a boîtier en plastique, a verrouillage, températures d'utilisation - 55 °C a 175 °C - Partie 002 : Spécification de performances et d'arrangements des contacts

Aeronavtika – Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje, plastičnim ohišjem, zapornim mehanizmom, z delovno temperaturo med –55 °C in 175 °C – 002. del: Specifikacija lastnosti in razporeditev kontaktov

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2006
• Withdrawal Date: 19-Jun-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Jun-2008
• Due Date: 06-Jul-2008
• Completion Date: 20-Jun-2008
• Ref Project: EN 3545-002:2005 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements

Relations

• Replaced By: SIST EN 3545-002:2008 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements
• Effective Date: 01-Sep-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3545-002:2006
01-julij-2006
$HURQDYWLND±.RQHNWRUMLHOHNWULþQLSUDYRNRWQLVWHVQLOQRNDSRDOLEUH]QMH
SODVWLþQLPRKLãMHP]DSRUQLPPHKDQL]PRP]GHORYQRWHPSHUDWXURPHG±ƒ&LQ
ƒ&±GHO6SHFLILNDFLMDODVWQRVWLLQUD]SRUHGLWHYNRQWDNWRY
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002:
Specification of performance and contact arrangements
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere
Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
175 °C - Teil 002: Leistungsdaten und Kontaktanordnungen
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches a
l'arriere, a boîtier en plastique, a verrouillage, températures d'utilisation - 55 °C a 175 °C
- Partie 002 : Spécification de performances et d'arrangements des contacts
Ta slovenski standard je istoveten z: EN 3545-002:2005
ICS:
49.060
SIST EN 3545-002:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 3545-002

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2005
ICS 49.060
English Version
Aerospace series - Connectors, electrical, rectangular, with
sealed and non-sealed rear, plastic housing, locking device,
operating temperatures - 55 °C to 175 °C - Part 002:
Specification of performance and contact arrangements
Série aérospatiale - Connecteurs électriques, Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder
rectangulaires, étanches et non étanches à l'arrière, à mit und ohne hintere Abdichtung, Plastikgehäuse,
boîtier en plastique, à verrouillage, températures Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
d'utilisation - 55 °C à 175 °C - Partie 002 : Spécification de 175 °C - Teil 002: Leistungsdaten und Kontaktanordnungen
performances et d'arrangements des contacts
This European Standard was approved by CEN on 26 September 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3545-002:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 3545-002:2005 (E)
Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions.5

4 Operating conditions.6
5 List of product standards.9
6 Polarization – Coding .9
7 Contact arrangements.10
8 Contacts.13
9 Filler plugs.14
10 Rear accessory.14
11 Tooling.14
12 Assembly and wiring instructions.14

2

---------------------- Page: 3 ----------------------

EN 3545-002:2005 (E)
Foreword
This European Standard (EN 3545-002:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
3

---------------------- Page: 4 ----------------------

EN 3545-002:2005 (E)
1 Scope
This standard specifies conditions which are common to rectangular electrical connectors with sealed and
non-sealed rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C.
It shall be used together with EN 3545-001.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2591-100, Aerospace series ― Elements of electrical and optical connection ― Test methods ― Part 100:
General.
EN 2591-209, Aerospace series ― Elements of electrical and optical connection ― Test methods ― Part 209:
Current temperature derating.
EN 3155-002, Aerospace series ― Electrical contacts used in elements of connection ― Part 002: List and
1)
utilization of contacts.
EN 3155-003, Aerospace series ― Electrical contacts used in elements of connection ― Part 003: Contacts,
electrical, female, type A, crimp, class S ― Product standard.
EN 3155-008, Aerospace series ― Electrical contacts used in elements of connection ― Part 008: Contacts,
electrical, male, type A, crimp, class S ― Product standard.
EN 3155-070, Aerospace series ― Electrical contacts used in elements of connection ― Part 070: Contacts,
2)
electrical, male, type A, crimp, class S ― Product standard.
EN 3155-071, Aerospace series ― Electrical contacts used in elements of connection ― Part 071: Contacts,
2)
electrical, female, type A, crimp, class S ― Product standard.
1)
EN 3197, Aerospace series ― Installation of aircraft electrical and optical interconnection systems.
EN 3545-001, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 001: Technical specification.
EN 3545-003, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 003: Connectors with
female contacts ― Product standard.
EN 3545-004, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 004: Connectors with male
contacts ― Product standard.
EN 3545-005, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 005: Female coding and
1)
attachment system for mounting on free housing (plug) ― Product standard.

1) Published as AECMA Presta
...