SIST EN 12390-6:2010
(Main)Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
This European Standard specifies a method for the determination of the tensile splitting strength of cylindrical test specimens of hardened concrete. A method using cubic or prismatic specimens is included in normative Annex A.
Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekörpern
Diese Norm legtenthält Festlegungen für ein Verfahren zur Bestimmung der Spaltzugfestigkeit von zylindrischen Probekörpern aus Festbeton fest. Ein Verfahren zur Prüfung kubischer oder prismatischer Probekörper enthält Anhang A (normativ).
Essai pour béton durci - Partie 6: Détermination de la résistance en traction par fendage d'éprouvettes
La présente Norme européenne spécifie une méthode de détermination de la résistance en traction par fendage d’éprouvettes cylindriques de béton durci. Une méthode de réalisation de cet essai sur éprouvettes cubiques ou prismatiques est présentée à l’Annexe A (normative).
Preskušanje strjenega betona - 6. del: Natezna razcepna trdnost preskušancev
Ta mednarodni standard določa metodo za določanje natezne trdnosti valjastih preskušancev strjenega betona. Normativni Dodatek A vključuje metodo, ki uporablja vzorce v obliki kock ali prizem.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskušanje strjenega betona - 6. del: Natezna razcepna trdnost preskušancevPrüfung von Festbeton - Teil 6: Spaltzugfestigkeit von ProbekörpernEssai pour béton durci - Partie 6: Détermination de la résistance en traction par fendage d'éprouvettesTesting hardened concrete - Part 6: Tensile splitting strength of test specimens91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 12390-6:2009SIST EN 12390-6:2010en,fr,de01-maj-2010SIST EN 12390-6:2010SLOVENSKI
STANDARDSIST EN 12390-6:2001/AC:2004SIST EN 12390-6:2001oSIST prEN 12390-6:20081DGRPHãþD
SIST EN 12390-6:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12390-6
December 2009 ICS 91.100.30 Supersedes EN 12390-6:2000English Version
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Essais sur béton - Partie 6 : Détermination de la résistance en traction par fendage d'éprouvettes
Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekörpern This European Standard was approved by CEN on 1 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12390-6:2009: ESIST EN 12390-6:2010
EN 12390-6:2009 (E) 2 Contents Page Foreword .3 Introduction .41Scope .52Normative references .53Principle .54Apparatus .55Test specimens .66Procedure .77Expression of results .88Test report .99Precision .9Annex A (normative)
Determination of tensile splitting strength using cubic or prismatic specimens . 10 SIST EN 12390-6:2010
EN 12390-6:2009 (E) 3 Foreword This document (EN 12390-6:2009) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of
...
SLOVENSKI STANDARD
SIST FprEN 12390-6:2009
01-junij-2009
Preskušanje strjenega betona - 6. del: Natezna trdnost preskušancev
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekörpern
Essai pour béton durci - Partie 6: Détermination de la résistance en traction par fendage
d'éprouvettes
Ta slovenski standard je istoveten z: FprEN 12390-6
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST FprEN 12390-6:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST FprEN 12390-6:2009
---------------------- Page: 2 ----------------------
SIST FprEN 12390-6:2009
EUROPEAN STANDARD
FINAL DRAFT
FprEN 12390-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2009
ICS 91.100.30 Will supersede EN 12390-6:2000
English Version
Testing hardened concrete - Part 6: Tensile splitting strength of
test specimens
Essai pour béton durci - Partie 6: Détermination de la Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von
résistance en traction par fendage d'éprouvettes Probekörpern
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 12390-6:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST FprEN 12390-6:2009
FprEN 12390-6:2009 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Principle .5
4 Apparatus .5
5 Test specimens .6
6 Procedure .7
7 Expression of results .8
8 Test report .9
9 Precision .9
Annex A (normative) Determination of tensile splitting strength using cubic or prismatic
specimens . 10
2
---------------------- Page: 4 ----------------------
SIST FprEN 12390-6:2009
FprEN 12390-6:2009 (E)
Fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.