SIST EN 3660-001:2016
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
This European Standard defines cable outlet accessories for use with circular and rectangular, electrical
and optical connectors on aerospace equipment. These may be sealed or unsealed and include
accessories suitable for the suppression of radio frequency and electromagnetic interference.
This European Standard is used in conjunction with circular and rectangular electrical and optical
connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire
resistant applications as designated in the product standards.
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische Lieferbedingungen
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification technique
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 001. del: Tehnična specifikacija
Ta evropski standard opredeljuje dodatke kabelskih spojk za uporabo z okroglimi in pravokotnimi električnimi in optičnimi konektorji v aeronavtični opremi. Ti so lahko opremljeni s tesnilno kapo ali brez nje in vključujejo
dodatke, primerne za dušenje radiofrekvenčnih in elektromagnetnih motenj. Ta evropski standard se uporablja v povezavi z okroglimi in pravokotnimi električnimi in optičnimi konektorji za različne temperaturne razpone, pogoje okolice, požarno odporne in neodporne izvedbe, kot je določeno v standardih za izdelke.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische LieferbedingungenSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification techniqueAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification49.060Aerospace electric equipment and systems31.220.99Druge elektromehanske komponenteOther electromechanical componentsICS:Ta slovenski standard je istoveten z:EN 3660-001:2016SIST EN 3660-001:2016en,fr,de01-marec-2016SIST EN 3660-001:2016SLOVENSKI
STANDARDSIST EN 3660-001:20091DGRPHãþD
SIST EN 3660-001:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-001
January
t r s x ICS
v {ä r x r Supersedes EN
u x x ræ r r sã t r r xEnglish Version
Aerospace series æ Cable outlet accessories for circular and rectangular electrical and optical connectors æ Part
r r sã Technical specification Série aérospatiale æ Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques æ Partie
r r s ã Spécification technique
Luftæ und Raumfahrt æ Endgehäuse für elektrische und optische Rundæ und Rechtecksteckverbinder æ Teil
r r sã Technische Lieferbedingungen This European Standard was approved by CEN on
z June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x x ræ r r sã t r s x ESIST EN 3660-001:2016
EN 3660-001:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Conditions of use . 5 5 Design and description . 6 6 Dimensions and mass . 6 7 Operation . 7 8 Tests . 7 9 Quality assurance . 9 10 Designation and marking . 13 11 Delivery condition . 13 12 Packaging . 13 13 Storage . 14
SIST EN 3660-001:2016
EN 3660-001:2016 (E) 3 European foreword This document (EN 3660-001:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2016, and conflicting national standards shall be withdrawn at the latest by July 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3660-001:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3660-001:2016
EN 3660-001:2016 (E) 4 1 Scope This European Standard defines cable outlet accessories for use with circular and rectangular, electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radio frequency and electromagnetic interference. This European Standard is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire resistant applications as designated in the product standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591- 1), Aerospace series — Elements of electrical and optical connection — Test methods EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards
EN 9100, Aerospace series — Quality Management Systems — Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts
ISO 261, ISO general purpose metric screw threads — General plan ISO 263, ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0.06 to 6 in ISO 965-1, ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data IEC 60050-581, International electrotechnical vocabulary — Electromechanical components for electronic equipment MIL-HDBK-454B, General Guidelines for Electronic Equipment 2)
1) All parts quoted in Table 3. 2) Published by: DoD National (US) Mil. Department of Defense http://www.defenselink.mil/ SIST EN 3660-001:2016
EN 3660-001:2016 (E) 5 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-581 apply together with the following. 3.1 backshell non-preferred term, use cable outlet accessory 3.2 cable screen termination a device for terminating the cable screen to the cable outlet and giving electrical continuity 3.3 cable tie a flexible strap or cord for securing a cable bundle to a cable outlet 3.4 coupling nut an accessory or part of a component which secures the cable outlet to the body of the connector 4 Conditions of use 4.1 General In accordance with the individual the product standard, refer to EN 3660-002. 4.2 Accessory styles See Table 1. Table 1 Style Description A Cable outlet, unsealed B Cable outlet, sealed C Cable outlet, shielded, unsealed D Cable outlet, shielded, sealed E Conduit adapter, unsealed F Conduit adapter, sealed G Adaptor (misc. incl. rectangular), unsealed H Adaptor (misc. incl. rectangular), sealed J Cable outlet, for heat shrinkable boot, sealed K Cable outlet, for heat shrinkable boot, shielded, sealed Z Various components, tools
SIST EN 3660-001:2016
EN 3660-001:2016 (E) 6 4.3 Material/finish classes See Table 2. Table 2 Class Temperature range Material/finish A − 65 °C to 175 °C Aluminium/black anodised J − 65 °C to 175 °C Non-metallic/olive drab cadmium plated K − 65 °C to 260 °C Stainless steel/passivated KE − 65 °C to 200 °C Stainless steel/passivated M − 65 °C to 200 °C Non-metallic/electroless nickel plated N(F) − 65 °C to 200 °C Aluminium/electroless nickel plated P − 65 °C to 175 °C Non-metallic/unplated T − 65 °C to 175 °C Aluminium /nickel PTFE(Teflon) plated W − 65 °C to 175 °C Aluminium/olive drab cadmium plated Z − 65 °C to 175 °C Aluminium/black zinc nickel plated
5 Design and description 5.1 Design Cable outlet accessories shall be designed and constructed to withstand normal handling incident to installation and maintenance in service. They shall be capable of being fitted to and removed from connectors by use of hand only unless otherwise specified in the product standard. The cable outlet accessory product standard shall contain outline drawings relating to general installation and interchangeability. 5.2 Materials Materials shall be suitable for the purpose intended and as specified in the product standard. When a definite material is not specified, a material shall be used which will enable the accessory to meet the performance requirements specified in the product standard. When dissimilar materials are employed in intimate contact with each other, protection against corrosion shall be used to ensure that the differential electromotive potential does not exceed 0,25 V. 5.3 Finish The finish shall be in accordance with the product standard. 5.4 Threads The threads shall conform to either ISO 261, ISO 263 or ISO 965-1 where applicable. 6 Dimensions and mass The dimensions of cable outlets and their mass shall be as defined in the product standard. SIST EN 3660-001:2016
EN 3660-001:2016 (E) 7 7 Operation Installation instructions and tooling, where necessary, shall be defined in the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.