SIST EN 3660-031:2017
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
This European Standard defines a range of cable outlets, style K, straight, shielded, sealed for heat
shrinkable boot, for use with memory metal rings under the following conditions.
The mating connectors are listed in EN 3660-002.
Temperature range, Class N : − 65 °C to 200 °C
Class K : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class T : − 65 °C to 175 °C (Nickel PTFE plating)
Class Z : − 65 °C to 175 °C (Zinc Nickel plating)
Associated electrical accessories : EN 3660-034 memory metal rings (for shield termination
backshells).
These cable outlets are designed for termination of overall shielding braid or individual cable shields.
They accommodate/permit the termination of heat shrinkable boots.
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 031: Endgehäuse, Bauform K, gerade, für wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet - Produktnorm
Diese Europäische Norm legt eine Reihe von Endgehäusen, Bauform K, gerade, geschirmt, abgedichtet für wärmeschrumpfende Bauteile, für die Verwendung mit Formgedächtnismetallring unter folgenden Bedingungen fest.
Die zugehörigen Steckverbinder sind in EN 3660-002 aufgeführt.
Temperaturbereich, Klasse N: −65 °C bis 200 °C;
Klasse K: −65 °C bis 200 °C;
Klasse W: −65 °C bis 175 °C;
Klasse T: −65 °C bis 175 °C (Nickel mit PTFE-Beschichtung);
Klasse Z: −65 °C bis 175 °C (Zink-Nickel-Beschichtung).
Zugehörige elektrische Zubehörteile: EN 3660-034 Formgedächtnismetallringe (für Schirmanschluss an Endgehäuse).
Diese Endgehäuse sind für den Anschluss von Gesamt- oder Einzelschirmen konstruiert. Sie ermöglichen den Anschluss wärmeschrumpfender Bauteile.
Série Aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 031 : Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable - Norme de produit
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 031. del: Kabelska spojka, tip K, ravna, za toplotno skrčljive dele, oklopljena, tesnjena - Standard za proizvod
Ta evropski standard opredeljuje različne vrste kabelskih spojk (tip K, ravne, oklopljene, tesnjene za toplotno
skrčljive dele) za uporabo s spominskimi kovinskimi obročki pod naslednjimi pogoji.
Stikalni priključki so navedeni v standardu EN 3660-002.
Temperaturni razpon, razred N: od −65 °C do 200 °C
Razred K: od −65 °C do 200 °C
Razred W: od −65 °C do 175 °C
Razred T: od −65 °C do 175 °C (nikljeva prevleka PTFE)
Razred Z: od −65 °C do 175 °C (cink-nikljeva prevleka)
Povezani električni dodatki: spominski kovinski obročki iz standarda EN 3660-034 (za oklepe zaključnega oklopa)
Te kabelske spojke so zasnovane za zaključitev celotne oklopljene pletenice ali posameznih kabelskih oklopov. Omogočajo/dovoljujejo zaključevanje toplotno skrčljivih delov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3660-031:2017
01-november-2017
$HURQDYWLND'RGDWNL]DRNURJOHLQSUDYRNRWQHHOHNWULþQHLQRSWLþQHNRQHNWRUMH
GHO .DEHOVNDVSRMNDWLS.UDYQD]DWRSORWQRVNUþOMLYHGHOHRNORSOMHQD
WHVQMHQD6WDQGDUG]DSURL]YRG
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot,
shielded, sealed - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 031: Endgehäuse, Bauform K, gerade, für
wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet - Produktnorm
Série Aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 031 : Raccord, type K, droit, blindé, étanche, pour
manchon thermorétractable - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-031:2017
ICS:
31.220.99 Druge elektromehanske Other electromechanical
komponente components
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3660-031:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3660-031:2017
---------------------- Page: 2 ----------------------
SIST EN 3660-031:2017
EN 3660-031
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2017
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 031:
Cable outlet, style K, straight, for heat shrinkable boot,
shielded, sealed - Product standard
Série Aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 031:
optiques - Partie 031 : Raccord, type K, droit, blindé, Endgehäuse, Bauform K, gerade, für
étanche, pour manchon thermorétractable - Norme de wärmeschrumpfende Bauteile, Schirmanschluß,
produit abgedichtet - Produktnorm
This European Standard was approved by CEN on 17 April 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-031:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3660-031:2017
EN 3660-031:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Characteristics . 5
5 Designation.18
6 Marking .18
7 Technical specification .18
2
---------------------- Page: 4 ----------------------
SIST EN 3660-031:2017
EN 3660-031:2017 (E)
European foreword
This document (EN 3660-031:2017) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be
withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 3660-031:2017
EN 3660-031:2017 (E)
1 Scope
This European Standard defines a range of cable outlets, style K, straight, shielded, sealed for heat
shrinkable boot, for use with memory metal rings under the following conditions.
The mating connectors are listed in EN 3660-002.
Temperature range, Class N : − 65 °C to 200 °C
Class K : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class T : − 65 °C to 175 °C (Nickel PTFE plating)
Class Z : − 65 °C to 175 °C (Zinc Nickel plating)
Associated electrical accessories : EN 3660-034 memory metal rings (for shield termination
backshells).
These cable outlets are designed for termination of overall shielding braid or individual cable shields.
They accommodate/permit the termination of heat shrinkable boots.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
*
EN 2591-100 , Aerospace series ― Elements of electrical and optical connection ― Test methods ― Part 100:
General
EN 3645 (all parts), Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating
temperature 175 °C or 200 °C continuous
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 001: Technical specification
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 002: Index of product standards
EN 3660-034, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 034: Memory metal rings, style Z, for the attachment of screens — Product
standard
EN 3909, Aerospace series — Test fluids and test methods for electrical and optical components and
sub-assemblies
IEC 60529, Degrees of protection provided by enclosures (IP Code)
*
All its parts quoted in this European Standard.
4
---------------------- Page: 6 ----------------------
SIST EN 3660-031:2017
EN 3660-031:2017 (E)
1)
AS85049, Connector accessories, electrical general specification for-
A-A-59569, Braid, wire (copper, tin-coated, silver-coated, or nickel coated, tubular or flat)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3660-001 apply.
4 Characteristics
4.1 Dimensions and mass
For dimensions and mass, see Figures 1, 2 and 3 and Tables 1, 2, 3 and 4.
For cable entry dimensions, see 4.2.
Dimensions are in millimetres.
1) Published by: SAE National (US) Society of Automotive Engineers. http://www.sae.org/
5
---------------------- Page: 7 ----------------------
SIST EN 3660-031:2017
EN 3660-031:2017 (E)
Key
1 O-ring
2 EN 3660-034 memory metal ring
3 Thread C
4 Marking
5 Three equally spaced holes 1 mm diameter for locking wire
6 Straight knurl, pitch manufacturers option
Cable outlets may be manufactured as cast, fabricated or machined (manufacturers option).
1,6 µm max.
No sharp edges/burrs permissible on internal surfaces/joints. Surface finish of on all internal
surfaces.
Figure 1 — Cable outlet
6
---------------------- Page: 8 ----------------------
SIST EN 3660-031:2017
EN 3660-031:2017 (E)
Table 1 — Fixed dimensions of shell
Dimensions in millimetres
Shell Entry Cable C E
∅B ∅D
size size dia. (ref) Thread
max. max. max. min. max.
09 04 5,4 19,1 5,85 14,5
M12 × 1,0-6H
11 07 9,4 21,6 10,62 14,5
M15 × 1,0-6H
13 08 10,8 25,4 12,20 14,5
M18 × 1,0-6H
15 10 13,5 M22 × 1,0-6H 29,2 15,38 14,5
17 12 16,2 31,8 18,55 14,5
M25 × 1,0-6H
19 14 18,9 35,6 21,73 14,5
M28 × 1,0-6H
21 16 21,6 M31 × 1,0-6H 38,1 24,90 14,5
23 18 24,3 41,9 28,08 14,5
M34 × 1,0-6H
25 20 27,0 44,5 31,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.