EN 3660-001:2016

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification

This European Standard defines cable outlet accessories for use with circular and rectangular, electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radio frequency and electromagnetic interference.
This European Standard is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire resistant applications as designated in the product standards.

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification technique

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 001. del: Tehnična specifikacija

Ta evropski standard opredeljuje dodatke kabelskih spojk za uporabo z okroglimi in pravokotnimi električnimi in optičnimi konektorji v aeronavtični opremi. Ti so lahko opremljeni s tesnilno kapo ali brez nje in vključujejo
dodatke, primerne za dušenje radiofrekvenčnih in elektromagnetnih motenj. Ta evropski standard se uporablja v povezavi z okroglimi in pravokotnimi električnimi in optičnimi konektorji za različne temperaturne razpone, pogoje okolice, požarno odporne in neodporne izvedbe, kot je določeno v standardih za izdelke.

General Information

• Status: Withdrawn
• Publication Date: 12-Jan-2016
• Withdrawal Date: 18-Jun-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Jun-2019
• Ref Project: SIST EN 3660-001:2016 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification

Relations

• Replaces: EN 3660-001:2006 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
• Effective Date: 18-Feb-2015
• Replaced By: EN 3660-001:2019 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
• Effective Date: 25-Oct-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische LieferbedingungenSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification techniqueAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification49.060Aerospace electric equipment and systems31.220.99Druge elektromehanske komponenteOther electromechanical componentsICS:Ta slovenski standard je istoveten z:EN 3660-001:2016SIST EN 3660-001:2016en,fr,de01-marec-2016SIST EN 3660-001:2016SLOVENSKI
STANDARDSIST EN 3660-001:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-001
January
t r s x ICS
v {ä r x r Supersedes EN
u x x ræ r r sã t r r xEnglish Version
Aerospace series æ Cable outlet accessories for circular and rectangular electrical and optical connectors æ Part
r r sã Technical specification Série aérospatiale æ Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques æ Partie
r r s ã Spécification technique
Luftæ und Raumfahrt æ Endgehäuse für elektrische und optische Rundæ und Rechtecksteckverbinder æ Teil
r r sã Technische Lieferbedingungen This European Standard was approved by CEN on
z June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x x ræ r r sã t r s x ESIST EN 3660-001:2016

EN 2591- 1), Aerospace series — Elements of electrical and optical connection — Test methods EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards
EN 9100, Aerospace series — Quality Management Systems — Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts
ISO 261, ISO general purpose metric screw threads — General plan ISO 263, ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0.06 to 6 in ISO 965-1, ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data IEC 60050-581, International electrotechnical vocabulary — Electromechanical components for electronic equipment MIL-HDBK-454B, General Guidelines for Electronic Equipment 2)
1) All parts quoted in Table 3. 2) Published by: DoD National (US) Mil. Department of Defense http://www.defenselink.mil/ SIST EN 3660-001:2016

5 Design and description 5.1 Design Cable outlet accessories shall be designed and constructed to withstand normal handling incident to installation and maintenance in service. They shall be capable of being fitted to and removed from connectors by use of hand only unless otherwise specified in the product standard. The cable outlet accessory product standard shall contain outline drawings relating to general installation and interchangeability. 5.2 Materials Materials shall be suitable for the purpose intended and as specified in the product standard. When a definite material is not specified, a material shall be used which will enable the accessory to meet the performance requirements specified in the product standard. When dissimilar materials are employed in intimate contact with each other, protection against corrosion shall be used to ensure that the differential electromotive potential does not exceed 0,25 V. 5.3 Finish The finish shall be in accordance with the product standard. 5.4 Threads The threads shall conform to either ISO 261, ISO 263 or ISO 965-1 where applicable. 6 Dimensions and mass The dimensions of cable outlets and their mass shall be as defined in the product standard. SIST EN 3660-001:2016
...