oSIST prEN IEC 61300-2-2:2025
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-2: Prüfungen - Garantierte minimale Steckzyklenanzahl
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-2: Essais - Durabilité de l'accouplement
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-2. del: Preskusi - Mehanično trajanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2025
Povezovalne naprave in pasivne komponente optičnih vlaken - Postopki
osnovnega preskušanja in merjenja - 2-2. del: Preskusi - Mehanično trajanje
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-2: Tests - Mating durability
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-2: Prüfungen - Garantierte minimale Steckzyklenanzahl
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-2: Essais - Durabilité de l'accouplement
Ta slovenski standard je istoveten z: prEN IEC 61300-2-2:2025
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
86B/5049/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-2-2 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-05-23 2025-08-15
SUPERSEDES DOCUMENTS:
86B/4919/CD, 86B/4937B/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Ryo Koyama
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 2-2: Tests - Mating durability
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
2 IEC CDV 61300-2-2 ED4 © IEC 2025
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 6
4 2 Normative references . 6
5 3 Terms and definitions . 6
6 4 General description . 6
7 5 Apparatus . 7
8 5.1 Fixture . 7
9 5.2 Application of force. 7
10 5.3 Measuring equipment . 7
11 6 Procedure . 7
12 6.1 Initial inspection . 7
13 6.2 Cycling . 7
14 6.3 Measurements . 8
15 6.3.1 General . 8
16 6.3.2 Measurement and cleaning conditions . 8
17 6.3.3 Final examinations and measurements . 8
18 7 Severity . 8
19 8 Details to be specified and reported . 8
20 Bibliography . 10
21 Figure 1 – Mating durability test for a plug-adapter-plug configuration . 7
22 Figure 2 – Mating durability test for a plug-socket configuration . 7
23 Table 1 – Recommended severity values . 8
IEC CDV 61300-2-2 ED4 © IEC 2025 3
25 INTERNATIONAL ELECTROTECHNICAL COMMISSION
26 ____________
28 FIBRE OPTIC INTERCONNECTING
29 DEVICES AND PASSIVE COMPONENTS –
30 BASIC TEST AND MEASUREMENT PROCEDURES –
32 Part 2-2: Tests – Mating durability
FOREWORD
35 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
36 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
37 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
38 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
39 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
40 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
41 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
42 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
43 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
44 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
45 consensus of opinion on the relevant subjects since each technical committee has representation from all
46 interested IEC National Committees.
47 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
48 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
49 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
50 misinterpretation by any end user.
51 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
52 transparently to the maximum extent possible in their national and regional publications. Any divergence between
53 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
54 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
55 declared to be in conformity with an IEC Publication.
56 6) All users should ensure that they have the latest edition of this publication.
57 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
58 members of its technical committees and IEC National Committees for any personal injury, property damage or
59 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
60 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
61 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
62 indispensable for the correct application of this publication.
63 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
64 rights. IEC shall not be held responsible for identifying any or all such patent rights.
65 International Standard IEC 61300-2-2 has been prepared by subcommittee 86B: Fibre optic
66 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
67 This fourth edition cancels and replaces the third edition, published in 2009, and constitutes a
68 technic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.