SIST EN 4462:2009
(Main)Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa
Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa
This standard specifies the requirements relating to:
Steel FE-PM1506 (X5CrNiMoAl13-8-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Bar
a or D £ 150 mm
Rm ³ 1 300 MPa
for aerospace applications.
Luft- und Raumfahrt - Stahl FE-PM1506 (X5CrNiMoAlTi13-8-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgehärtet - Stangen - a oder D ≤ 150 mm - Rm ≥ 1 300 MPa
Diese Norm legt die Anforderungen an
Stahl FE PM1506 (X5CrNiMoAI13-8-2)
Vakuuminduktionserschmolzen und
mit selbstverzehrender Elektrode umgeschmolzen
Lösungsgeglüht und ausgehärtet
Stangen
a oder D 150 mm
Rm ≥ 1 300 MPa
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Acier FE-PM1506 (X5CrNiMoAl13-8-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Barres - a ou D ≤ 150 mm - Rm ≥ 1 300 MPa
Aeronavtika - Jeklo FE-PM1506 (X5CrNiMoAl13-8-2) - Palice a ali D ≤ 150 mm - Rm ≥ 1300 MPa, taljene z vakuumsko indukcijo in pretaljene s talilno elektrodo, žarjene v topilu in utrjene
General Information
Standards Content (sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4462:2007SIST EN 4462:2009en,de01-maj-2009SIST EN 4462:2009SLOVENSKI
STANDARDSIST EN 4462:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4462
June 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa
Série aérospatiale - Acier FE-PM1506 (X5CrNiMoAl13-8-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Barres - a ou D ≤ 150 mm - Rm ≥ 1 300 MPa
Luft- und Raumfahrt - Stahl FE-PM1506 (X5CrNiMoAlTi13-8-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Stangen - a oder D ≤ 150 mm - Rm ≥ 1 300 MPa This European Standard was approved by CEN on 15 February 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4462:2007: ESIST EN 4462:2009
EN 4462:2007 (E) 2 Foreword This document (EN 4462:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007 and conflicting national standards shall be withdrawn at the latest by December 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4462:2009
EN 4462:2007 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This st
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.