SIST EN 3487:2025

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Bars for machining
a or D ≤ 250 mm
500 MPa ≤ Rm ≤ 700 MPa
for aerospace applications.
W.nr: 1.4541.
ASD-STAN designation: FE-PA3601.

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht - Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

No Scope available

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Barres pour usinage - a ou D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

No Scope available

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Mehčano - Palice za obdelavo - a ali D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

General Information

• Status: Published
• Public Enquiry End Date: 30-Nov-2020
• Publication Date: 26-Nov-2024
• ICS: 49.025.10 - Steels
• ICS: 77.140.60 - Steel bars and rods
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Nov-2024
• Due Date: 26-Jan-2025
• Completion Date: 27-Nov-2024
• Ref Project: EN 3487:2024 - Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

Relations

• Revised: SIST EN 3487:2008 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2025
Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Mehčano - Palice za
obdelavo - a ali D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for
machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -
Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Barres pour
usinage - a ou D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
Ta slovenski standard je istoveten z: EN 3487:2024
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3487
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 3487:2007
English Version
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Bars for machining - a or D  250 mm -
500 MPa  Rm  700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -
Élaboré à l'air - Adouci - Barres pour usinage - a ou D  Lufterschmolzen - Weichgeglüht - Stangen zur
250 mm - 500 MPa  Rm  700 MPa spanenden Bearbeitung - a oder D  250 mm - 500 MPa
 Rm  700 MPa
This European Standard was approved by CEN on 19 May 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3487:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 6

European foreword
This document (EN 3487:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by May 2025, and conflicting national standards shall be withdrawn at
the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3487:2007.
The main changes with respect to the previous edition are as follows:
— EN 3487 (P2), 12/2007 — General editorial improvements and update of the references in the
bibliography
...