SIST EN 388:2016/oprA1:2018

Protective gloves against mechanical risks

This European Standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact.
This standard is intended to be used in conjunction with EN 420.
The test methods developed in this standard may also be applicable to arm protectors.

Schutzhandschuhe gegen mechanische Risiken

Gants de protection contre les risques mécaniques

Varovalne rokavice za zaščito pred mehanskimi nevarnostmi TC: Rokavice za zaščito pred mehanskimi tveganji

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Apr-2018
• ICS: 13.340.40 - Hand and arm protection
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 04-Feb-2019
• Due Date: 09-Feb-2019
• Completion Date: 04-Feb-2019
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Ref Project: EN 388:2016/prA1:2018 - Protective gloves against mechanical risks

Relations

• Amends: SIST EN 388:2016 - Protective gloves against mechanical risks
• Effective Date: 01-Mar-2018
• Consolidated By: SIST EN 388:2016+A1:2019 - Protective gloves against mechanical risks
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 388:2016+A1:2019 - Protective gloves against mechanical risks
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 388:2016/oprA1:2018
01-april-2018
9DURYDOQHURNDYLFH]D]DãþLWRSUHGPHKDQVNLPLQHYDUQRVWPL
Protective gloves against mechanical risks
Schutzhandschuhe gegen mechanische Risiken
Gants de protection contre les risques mécaniques
Ta slovenski standard je istoveten z: EN 388:2016/prA1:2018
ICS:
13.340.40 Varovanje dlani in rok Hand and arm protection
SIST EN 388:2016/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 388:2016/oprA1:2018

---------------------- Page: 2 ----------------------

SIST EN 388:2016/oprA1:2018


DRAFT
EUROPEAN STANDARD
EN 388:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
February 2018
ICS 13.340.40
English Version

Protective gloves against mechanical risks
Gants de protection contre les risques mécaniques Schutzhandschuhe gegen mechanische Risiken
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 162.

This draft amendment A1, if approved, will modify the European Standard EN 388:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 388:2016/prA1:2018:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 388:2016/oprA1:2018
EN 388:2016/prA1:2018 (E)
Contents Page
European foreword . 3
1 Modification to Clause 2. 4
2 Modification to 6.2.5 . 4
3 Modification to A.2 . 5
4 Modification to Annex ZA . 5

2

---------------------- Page: 4 ----------------------

SIST EN 388:2016/oprA1:2018
EN 388:2016/prA1:2018 (E)
European foreword
This document (EN 388:2016/prA1:2018) has been prepared by Technical Committee CEN/TC 162
“Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held
by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
Regulation (EU) 2016/425.
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
3

---------------------- Page: 5 ----------------------

SIST
...