oSIST prEN ISO 12643-3:2014

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2014)

This standard provides safety requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in EN ISO 12643-1.
This standard provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process.
It is applicable to a wide range of equipment used in the binding and finishing process.

Graphische Technik — Sicherheitsanforderungen an Ausrüstungen und Systeme der graphischen Technik — Teil 3: Ausrüstungen und Systeme in der Buchbinderei und Druckweiterverarbeitung (ISO/DIS 12643-3:2014)

Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de technologie graphique - Partie 3: Systèmes et équipement de reliure et de finissage (ISO/DIS 12643-3:2014)

Le présent document décrit les exigences de sécurité applicables aux systèmes et équipements de reliure et de finissage. Il fournit des exigences de sécurité supplémentaires pour la conception et la construction de nouveaux équipements employés dans le façonnage de substrats vierges ou imprimés en un produit coupé, plié, assemblé, relié ou fini selon toute autre méthode.
Le présent document peut également s'appliquer aux processus de préparation du substrat pour le procédé d'impression. Il s'applique aussi à une grande diversité d'équipements utilisés dans les processus de reliure et de finissage.

Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in sisteme - 3. del: Oprema v knjigoveznici in grafični dodelavi ter sistemi (ISO/DIS 12643-3:2014)

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Sep-2014
• ICS: 37.100.10 - Reproduction equipment
• Technical Committee: GRT - Graphical technology
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 29-Jan-2019
• Due Date: 03-Feb-2019
• Completion Date: 29-Jan-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: FprEN ISO 12643-3 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/FDIS 12643-3:2023)

Relations

• Revised: SIST ISO 12643-3:2014 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems
• Effective Date: 01-Sep-2014
• Revised: SIST EN 1010-3:2003+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
• Effective Date: 01-Sep-2014

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 12643-3:2014
01-september-2014
*UDILþQDWHKQRORJLMD9DUQRVWQH]DKWHYH]DJUDILþQRWHKQRORãNRRSUHPRLQ
VLVWHPHGHO2SUHPDYNQMLJRYH]QLFLLQJUDILþQLGRGHODYLWHUVLVWHPL,62',6

Graphic technology - Safety requirements for graphic technology equipment and systems
- Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2014)
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de
technologie graphique - Partie 3: Systèmes et équipement de reliure et de finissage
(ISO/DIS 12643-3:2014)
Ta slovenski standard je istoveten z: prEN ISO 12643-3
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
oSIST prEN ISO 12643-3:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 12643-3:2014

---------------------- Page: 2 ----------------------
oSIST prEN ISO 12643-3:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 12643-3
ISO/TC 130 Secretariat: SAC
Voting begins on: Voting terminates on:
2014-05-22 2014-10-22
Graphic technology — Safety requirements for graphic
technology equipment and systems —
Part 3:
Binding and finishing equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et l’équipement de technologie
graphique —
Partie 3: Systèmes et équipement de reliure et de finissage
ICS: 37.100.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 12643-3:2014(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2014

---------------------- Page: 3 ----------------------
oSIST prEN ISO 12643-3:2014
ISO/DIS 12643-3:2014(E)

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2014 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 12643-3:2014
ISO/DIS 12643-3
Contents Page
Foreword . iv
Introduction . v
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 2
4  Conformity with this part of ISO 12643 . 4
5  Guarding of significant hazards .
...