oSIST prEN 3527:2024
(Main)Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a or D ≤ 300 mm
Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a or D ≤ 300 mm
This document specifies the requirements relating to:
Steel 33CrMoV12 (1.8522)
Air melted
Softened
Forging stock
a or D ≤ 300 mm
for aerospace applications.
NOTE ASD-STAN designation: FE-PL1504.
Material number: 1.8522.
Luft- und Raumfahrt - Stahl 33CrMoV12 (1.8522) - Lufterschmolzen - geglüht - Schmiedevormaterial - a oder D ≤ 300 mm
No Scope available
Série aérospatiale - Acier 33CrMoV12 (1.8522) - Élaboré à l'air - Adouci - Produit destiné à la forge - a ou D ≤ 300 mm
Le présent document spécifie les exigences relatives à :
Acier 33CrMoV12 (1.8522)
Élaboré à l’air
Adouci
Produits destinés à la forge
a ou D 300 mm
pour les applications aérospatiales.
NOTE Désignation ASD-STAN : FE-PL1504
Numéro de matériau : 1.8522
Aeronavtika - Jeklo 33CrMoV12 (1.8522) - Taljeno - Mehčano - Material za kovanje - a ali D ≤ 300 mm
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Aeronavtika - Jeklo 33CrMoV12 (1.8522) - Taljeno - Mehčano - Material za kovanje -
a ali D ≤ 300 mm
Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a
or D ≤ 300 mm
Luft- und Raumfahrt - Stahl 33CrMoV12 (1.8522) - Lufterschmolzen - geglüht -
Schmiedevormaterial - a oder D ≤ 300 mm
Série aérospatiale - Acier 33CrMoV12 (1.8522) - Élaboré à l'air - Adouci - Produit destiné
à la forge - a ou D ≤ 300 mm
Ta slovenski standard je istoveten z: prEN 3527
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 3527
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2024
ICS 49.025.10 Will supersede EN 3527:2007
English Version
Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted
- Softened - Forging stock - a or D 300 mm
Série aérospatiale - Acier 33CrMoV12 (1.8522) - Luft- und Raumfahrt - Stahl 33CrMoV12 (1.8522) -
Élaboré à l'air - Adouci - Produit destiné à la forge - a Lufterschmolzen - geglüht - Schmiedevormaterial - a
ou D 300 mm oder D 300 mm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3527:2024 E
worldwide for CEN national Members.
prEN 3527:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
prEN 3527:2024 (E)
European foreword
This document (prEN 3527:2024) has been prepared by (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.