SIST EN 3628:2023
(Main)Aerospace series - Lockwire, drawn - Corrosion resisting steel
Aerospace series - Lockwire, drawn - Corrosion resisting steel
This document specifies the dimensions and tolerances for drawn corrosion resisting steel lockwire for aerospace applications.
Luft- und Raumfahrt - Sicherungsdraht, gezogen - Korrosionsbeständiger Stahl
Dieses Dokument legt die Maße und Grenzabmaße für gezogenen Sicherungsdraht aus korrosionsbeständigem Stahl für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Fils à freiner étirés - Acier résistant à la corrosion
Le présent document spécifie les dimensions et tolérances des fils à freiner étirés en acier résistant à la corrosion pour les applications aérospatiales.
Aeronavtika - Vlečena zaklepna žica - Korozijsko odporna pločevina
Ta dokument določa mere in tolerance za vlečeno zaklepno jekleno žico, odporno proti koroziji, za uporabo v aeronavtiki.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3628:2023
01-december-2023
Aeronavtika - Vlečena zaklepna žica - Korozijsko odporna pločevina
Aerospace series - Lockwire, drawn - Corrosion resisting steel
Luft- und Raumfahrt - Sicherungsdraht, gezogen - Korrosionsbeständiger Stahl
Série aérospatiale - Fils à freiner étirés - Acier résistant à la corrosion
Ta slovenski standard je istoveten z: EN 3628:2023
ICS:
49.025.10 Jekla Steels
SIST EN 3628:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3628:2023
---------------------- Page: 2 ----------------------
SIST EN 3628:2023
EN 3628
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2023
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Lockwire, drawn - Corrosion resisting
steel
Série aérospatiale - Fils à freiner étirés - Acier résistant Luft- und Raumfahrt - Sicherungsdraht, gezogen -
à la corrosion Korrosionsbeständiger Stahl
This European Standard was approved by CEN on 16 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3628:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3628:2023
EN 3628:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Material . 4
4.2 Form. 4
4.3 Dimensions and masses . 5
4.3.1 Diameters and masses . 5
4.3.2 Tolerances on diameters . 5
4.4 Roundness . 5
4.5 Lengths. 5
5 Designation . 5
Annex A (informative) Standard evolution form . 6
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.