SIST EN IEC 63203-401-1:2024
(Main)Wearable electronic devices and technologies - Part 401-1: Devices and systems - functional elements - Evaluation method of the stretchable resistive strain sensor (IEC 63203-401-1:2023)
Wearable electronic devices and technologies - Part 401-1: Devices and systems - functional elements - Evaluation method of the stretchable resistive strain sensor (IEC 63203-401-1:2023)
IEC 63203-401-1:2023 specifies a measurement method of tensile strain for stretchable, resistive strain sensors. This document describes characterization procedures for evaluation of the gauge factor, linearity, response characteristics, and hysteresis of unimodal tension sensors but is not appropriate for assessment of the physical properties of the sensor material such as the elastic modulus, elastic limit, and Poisson's ratio.
Tragbare elektronische Geräte und Technologien - Teil 401-1: Produkte und Systeme - Funktionselemente - Bewertungsverfahren für dehnbare Widerstandssensoren (IEC 63203-401-1:2023)
Technologies et dispositifs électroniques prêt-à-porter - Partie 401-1 : Dispositifs et systèmes: éléments de fonctionnement - Méthode d’évaluation de la jauge de contrainte extensible de type résistif (IEC 63203-401-1:2023)
L’IEC 63203-401-1:2023 spécifie une méthode de mesure de la contrainte de traction pour les jauges de contrainte extensible de type résistif. Le présent document décrit les procédures de caractérisation pour l’évaluation du coefficient de traction, de la linéarité, des caractéristiques de réponse et de l’hystérésis des jauges de tension unimodales. Toutefois, il n’est pas adéquat pour l’évaluation des propriétés physiques des matériaux de la jauge, tels que le module d’élasticité, la limite d’élasticité et le coefficient de Poisson.
Nosljive elektronske naprave in tehnologije - 401-1. del: Naprave in sistemi - funkcionalni elementi - Metoda vrednotenja raztegljivega uporovnega senzorja napetosti (IEC 63203-401-1:2023)
Standard IEC 63203-401-1:2023 določa metodo za merjenje natezne napetosti raztegljivih uporovnih senzorjev napetosti. Ta dokument opisuje postopke karakterizacije za vrednotenje merilnega faktorja, linearnosti, odzivnih karakteristik in histereze enomodalnih senzorjev napetosti, vendar ni primeren za ocenjevanje fizičnih lastnosti materiala senzorja, kot so modul elastičnosti, meja elastičnosti in Poissonovo razmerje.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 63203-401-1:2024
01-januar-2024
Nosljive elektronske naprave in tehnologije - 401-1. del: Naprave in sistemi -
funkcionalni elementi - Metoda vrednotenja raztegljivega uporovnega senzorja
napetosti (IEC 63203-401-1:2023)
Wearable electronic devices and technologies - Part 401-1: Devices and systems -
functional elements - Evaluation method of the stretchable resistive strain sensor (IEC
63203-401-1:2023)
Tragbare elektronische Geräte und Technologien - Teil 401-1: Produkte und Systeme -
Funktionselemente - Bewertungsverfahren für dehnbare Widerstandssensoren (IEC
63203-401-1:2023)
Technologies et dispositifs électroniques prêt-à-porter - Partie 401-1 : Dispositifs et
systèmes: éléments de fonctionnement - Méthode d’évaluation de la jauge de contrainte
extensible de type résistif (IEC 63203-401-1:2023)
Ta slovenski standard je istoveten z: EN IEC 63203-401-1:2023
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN IEC 63203-401-1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 63203-401-1:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 63203-401-1:2024
EUROPEAN STANDARD EN IEC 63203-401-1
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2023
ICS 31.020
English Version
Wearable electronic devices and technologies - Part 401-1:
Devices and systems: functional elements - Evaluation method
of the stretchable resistive strain sensor
(IEC 63203-401-1:2023)
Technologies et dispositifs électroniques prêt-à-porter - Tragbare elektronische Geräte und Technologien - Teil 401-
Partie 401-1 : Dispositifs et systèmes: éléments de 1: Produkte und Systeme - Funktionselemente -
fonctionnement - Méthode d'évaluation de la jauge de Bewertungsverfahren für dehnbare Widerstandssensoren
contrainte extensible de type résistif (IEC 63203-401-1:2023)
(IEC 63203-401-1:2023)
This European Standard was approved by CENELEC on 2023-11-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63203-401-1:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 63203-401-1:2024
EN IEC 63203-401-1:2023 (E)
European foreword
The text of document 124/223/FDIS, future edition 1 of IEC 63203-401-1, prepared by IEC/TC 124
"Wearable electronic devices and technologies" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63203-401-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-08-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-11-13
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63203-401-1:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 63203-101-1:2021 NOTE Approved as EN IEC 63203-101-1:2021 (not mo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.