SIST EN 14428:2015/oprA1:2017

Shower enclosures - Functional requirements and test methods

This European Standard specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.
This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements.
NOTE   For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

Duschabtrennungen - Funktionsanforderungen und Prüfverfahren

Parois de douche - Prescriptions fonctionnelles et méthodes d'essai

Zasloni za prhanje - Funkcionalne zahteve in preskusne metode - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Nov-2017
• ICS: 91.140.70 - Sanitary installations
• Technical Committee: IOVO - Water supply and waste water engineering
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 04-Dec-2018
• Due Date: 09-Dec-2018
• Completion Date: 04-Dec-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/110 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on sanitary appliances
• Ref Project: EN 14428:2015/prA1:2017 - Shower enclosures - Functional requirements and test methods

Relations

• Consolidated By: SIST EN 14428:2015+A1:2019 - Shower enclosures - Functional requirements and test methods
• Effective Date: 18-Jan-2023
• Amends: SIST EN 14428:2015 - Shower enclosures - Functional requirements and test methods
• Effective Date: 01-Nov-2017
• Consolidated By: SIST EN 14428:2015+A1:2019 - Shower enclosures - Functional requirements and test methods
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14428:2015/oprA1:2017
01-november-2017
Zasloni za prhanje - Funkcionalne zahteve in preskusne metode - Dopolnilo A1
Shower enclosures - Functional requirements and test methods
Duschabtrennungen - Funktionsanforderungen und Prüfverfahren
Parois de douche - Prescriptions fonctionnelles et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14428:2015/prA1:2017
ICS:
91.140.70 Sanitarne naprave Sanitary installations
SIST EN 14428:2015/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14428:2015/oprA1:2017

---------------------- Page: 2 ----------------------

SIST EN 14428:2015/oprA1:2017


DRAFT
EUROPEAN STANDARD
EN 14428:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
September 2017
ICS 91.140.70
English Version

Shower enclosures - Functional requirements and test
methods
Parois de douche - Prescriptions fonctionnelles et Duschabtrennungen - Funktionsanforderungen und
méthodes d'essai Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 163.

This draft amendment A1, if approved, will modify the European Standard EN 14428:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14428:2015/prA1:2017:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14428:2015/oprA1:2017
EN 14428:2015/prA1:2017 (E)
Contents Page
European foreword . 3
1 Modifications to Clause 6, Marking . 4
2 Modification to sub-clause 7.1, General . 4
3 Modification to sub-clause 7.2.1, General . 4
4 Modification to Annex ZA . 4
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No. 305/2011 . 5
ZA.1 Scope and relevant characteristics . 5
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 5
ZA.3 Assignment of AVCP tasks . 5

2

---------------------- Page: 4 ----------------------

SIST EN 14428:2015/oprA1:2017
EN 14428:2015/prA1:2017 (E)
European foreword
This document (EN 14428:2015/prA1:2017) has been prepared by Technical Committee CEN/TC 163
“Sanitary appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document has been prep
...