SIST EN 14428:2015/oprA1:2017
(Amendment)Shower enclosures - Functional requirements and test methods
Shower enclosures - Functional requirements and test methods
This European Standard specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.
This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements.
NOTE For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
Duschabtrennungen - Funktionsanforderungen und Prüfverfahren
Parois de douche - Prescriptions fonctionnelles et méthodes d'essai
Zasloni za prhanje - Funkcionalne zahteve in preskusne metode - Dopolnilo A1
General Information
- Status
- Not Published
- Public Enquiry End Date
- 19-Nov-2017
- Technical Committee
- IOVO - Water supply and waste water engineering
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 04-Dec-2018
- Due Date
- 09-Dec-2018
- Completion Date
- 04-Dec-2018
Relations
- Consolidated By
SIST EN 14428:2015+A1:2019 - Shower enclosures - Functional requirements and test methods - Effective Date
- 18-Jan-2023
- Effective Date
- 01-Nov-2017
Overview
SIST EN 14428:2015/oprA1:2017 is a European standard developed by CEN that specifies the functional requirements and test methods for shower enclosures intended for domestic use. This standard ensures that shower enclosures, when installed according to the manufacturer’s instructions, perform satisfactorily in everyday use. It excludes shower cabinets and curtains, focusing solely on enclosures designed for personal hygiene in homes, hotels, hospitals, student accommodations, and similar buildings, unless special medical provisions apply.
This revision includes amendments that update marking requirements, general testing procedures, and alignment with the EU Construction Products Regulation (CPR), supporting CE marking and Declaration of Performance (DoP) processes.
Key Topics
Functional Requirements
The standard outlines essential performance characteristics including:- Cleanability
- Impact resistance and shatter properties (referencing EN 12150-1 for glass safety)
- Durability under normal use conditions
Test Methods
Prescribed tests verify compliance with functional criteria to ensure safety, reliability, and longevity. The amendment replaces previous impact resistance clauses with a direct reference to EN 12150-1, standardizing glass safety assessment.Marking and Documentation
Updated marking rules simplify designation codes, enabling clear communication of product characteristics and compliance status to consumers and regulatory bodies.Assessment and Verification of Constancy of Performance (AVCP)
Defines procedures for manufacturers and notified bodies to certify product consistency, essential for CE marking under Regulation (EU) No. 305/2011 (Construction Products Regulation). AVCP ensures ongoing production meets declared performance levels.
Applications
Residential and Domestic Buildings
Ensures shower enclosures installed in private homes meet safety, durability, and hygienic performance standards.Hospitality Sector
Appropriate for use in hotels and student accommodations, guaranteeing reliable installation that supports intensive daily usage in public environments.Healthcare Facilities
Applicable in hospitals and similar care buildings where standard hygienic conditions meet patient needs. The standard excludes specialized medical shower enclosures requiring distinct provisions.Product Certification and Regulatory Compliance
Manufacturers utilize SIST EN 14428:2015/oprA1:2017 to demonstrate compliance with European regulations, enabling CE marking and market access across EU member states and EFTA countries.
Related Standards
EN 12150-1 – Glass in building - Thermally toughened soda lime silicate safety glass: Defines impact resistance and shatter properties for safety glass used in shower enclosures.
Regulation (EU) No. 305/2011 (Construction Products Regulation) – Governs the marketing of construction products and mandates CE marking and DoP declaration, supported by EN 14428 for shower enclosures.
Other Sanitary Appliance Standards (CEN/TC 163) – Additional standards covering sanitary installations and fixtures that complement EN 14428 performance requirements.
Key Benefits:
- Establishes mandatory safety and performance benchmarks for reliable shower enclosure products.
- Provides manufacturers with harmonized testing procedures to facilitate market access.
- Enhances consumer confidence through transparent marking and certification.
- Supports compliance with EU construction product regulations, ensuring legal market conformity.
By adhering to SIST EN 14428:2015/oprA1:2017, stakeholders in the sanitary appliances industry can ensure their shower enclosures meet the latest functional, safety, and regulatory expectations.
Frequently Asked Questions
SIST EN 14428:2015/oprA1:2017 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Shower enclosures - Functional requirements and test methods". This standard covers: This European Standard specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended. This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements. NOTE For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
This European Standard specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended. This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements. NOTE For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
SIST EN 14428:2015/oprA1:2017 is classified under the following ICS (International Classification for Standards) categories: 91.140.70 - Sanitary installations. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14428:2015/oprA1:2017 has the following relationships with other standards: It is inter standard links to SIST EN 14428:2015+A1:2019, SIST EN 14428:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14428:2015/oprA1:2017 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/110. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 14428:2015/oprA1:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2017
Zasloni za prhanje - Funkcionalne zahteve in preskusne metode - Dopolnilo A1
Shower enclosures - Functional requirements and test methods
Duschabtrennungen - Funktionsanforderungen und Prüfverfahren
Parois de douche - Prescriptions fonctionnelles et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14428:2015/prA1:2017
ICS:
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 14428:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2017
ICS 91.140.70
English Version
Shower enclosures - Functional requirements and test
methods
Parois de douche - Prescriptions fonctionnelles et Duschabtrennungen - Funktionsanforderungen und
méthodes d'essai Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 163.
This draft amendment A1, if approved, will modify the European Standard EN 14428:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14428:2015/prA1:2017:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modifications to Clause 6, Marking . 4
2 Modification to sub-clause 7.1, General . 4
3 Modification to sub-clause 7.2.1, General . 4
4 Modification to Annex ZA . 4
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No. 305/2011 . 5
ZA.1 Scope and relevant characteristics . 5
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 5
ZA.3 Assignment of AVCP tasks . 5
European foreword
This document (EN 14428:2015/prA1:2017) has been prepared by Technical Committee CEN/TC 163
“Sanitary appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document has been prep
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...