kSIST FprEN ISO 14945:2019

Small craft - Builder's plate (ISO/FDIS 14945:2019)

2021-04-14 - Lack of compliance at FV stage - Publication on hold
DOW=DAV + 12 months

Kleine Wasserfahrzeuge - Hersteller-Schild (ISO/FDIS 14945:2019)

Petits navires - Plaque du constructeur (ISO/FDIS 14945:2019)

Mala plovila - Oznaka proizvajalca (Zahteve za poenoten prikaz podatkov na proizvajalčevi plošči na malih plovilih) (ISO/FDIS 14945:2019)

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Dec-2018
• ICS: 47.080 - Small craft
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 02-Jul-2019
• Due Date: 20-Aug-2019
• Completion Date: 09-Jul-2019
• Directive: 2013/53/EC - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: EN ISO 14945:2021 - Small craft - Builder's plate (ISO 14945:2021)

RELATIONS

• Revised: SIST EN ISO 14945:2004 - Small craft - Builder's plate (ISO 14945:2004)
• Effective Date: 05-Aug-2015
• Revised: SIST EN ISO 14945:2004/AC:2006 - Small craft - Builder's plate (ISO 14945:2004)
• Effective Date: 21-Jan-2020
• Replaces: SIST EN ISO 14945:2004 - Small craft - Builder's plate (ISO 14945:2004)
• Effective Date: 07-Jul-2021
• Replaces: SIST EN ISO 14945:2004/AC:2006 - Small craft - Builder's plate (ISO 14945:2004)
• Effective Date: 07-Jul-2021

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 14945:2018
01-december-2018
0DODSORYLOD2]QDNDSURL]YDMDOFD=DKWHYH]DSRHQRWHQSULND]SRGDWNRYQD
SURL]YDMDOþHYLSORãþLQDPDOLKSORYLOLK,62',6
Small craft - Builder's plate (ISO/DIS 14945:2018)
Kleine Wasserfahrzeuge - Hersteller-Schild (ISO/DIS 14945:2018)
Petits navires - Plaque du constructeur (ISO/DIS 14945:2018)
Ta slovenski standard je istoveten z: prEN ISO 14945
ICS:
47.080 ýROQL Small craft
oSIST prEN ISO 14945:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 14945:2018
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14945:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14945
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2018-10-17 2019-01-09
Small craft — Builder's plate
Petits navires — Plaque du constructeur
ICS: 47.080
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14945:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14945:2018
ISO/DIS 14945:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14945:2018
ISO/DIS 14945:2018(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 General requirements ..................................................................................................................................................................................... 2

4.1 Material and fixing ............................................................................................................................................................................... 2

4.2 Marking ......................................................................................................................................................................................................... 2

4.3 Size of characters .................................................................................................................................................................................. 2

4.4 Size of pictograms and symbols ............................................................................................................................................... 2

4.5 Location ......................................................................................................................................................................................................... 2

5 Displayed builder’s plate information ........................................................................................................................................... 3

Annex A (informative) Design and examples of builder’s plates............................................................................................. 4

Annex ANNEX ZA ..................................................................................................................................................................................................................... 7

Bibliography ................................................................................................................................................................................................................................ 8

© ISO 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 14945:2018
ISO/DIS 14945:2018(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 188, Small craft.

This second edition cancels and replaces the first edition (ISO 14945:2004), which has been technically

revised.
The main changes compared to the previous edition are as follows:

— Clarified terminology about what constitutes maximum load on a builder's plate to include all fluids

(addresses RSG PFE No. 286)
— Defined small craft

— Updated section 5 to provide guidance for inclusion of the mass of outboards above 3kW and

maximum HP and maximum recommended load for the builder’s plate
— Updated plate illustrations
— Added power symbol definition
— Added ZA Annex
iv © ISO 2018 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 14945:2018
ISO/DIS 14945:2018(E)
Introduction

The reason underlying the preparation of this International Standard is that the European Recreational

Craft Directive (Directives 94/25/EC followed by 2013/53/EU) requires that all recreational craft

within the scope of the directive shall be labelled with a craft builder’s plate containing specified

information. This requirement applies to craft built inside the European Union (EU) as well as craft

...