EN ISO 14945:2021
(Main)Small craft - Builder's plate (ISO 14945:2021)
Small craft - Builder's plate (ISO 14945:2021)
This document specifies requirements for the uniform display of the information exhibited on the builder’s plate of small craft.
Personal watercraft are excluded from the Scope of this document.
Kleine Wasserfahrzeuge - Hersteller-Schild (ISO 14945:2021)
Dieses Dokument legt Anforderungen an die einheitliche Darstellung der Informationen auf dem Hersteller-Schild von kleinen Wasserfahrzeugen fest.
Wassersmotorräder sind vom Anwendungsbereich dieses Dokuments ausgeschlossen.
Petits navires - Plaque du constructeur (ISO 14945:2021)
Ce document spécifie les exigences relatives à l’affichage uniforme des informations figurant sur la plaque du constructeur de petits navires.
Les motos aquatiques sont exclues du domaine d'application de ce document.
Mala plovila - Oznaka proizvajalca (Zahteve za poenoten prikaz podatkov na proizvajalčevi plošči na malih plovilih) (ISO 14945:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14945:2021
01-september-2021
Nadomešča:
SIST EN ISO 14945:2004
SIST EN ISO 14945:2004/AC:2006
Mala plovila - Oznaka proizvajalca (Zahteve za poenoten prikaz podatkov na
proizvajalčevi plošči na malih plovilih) (ISO 14945:2021)
Small craft - Builder's plate (ISO 14945:2021)
Kleine Wasserfahrzeuge - Hersteller-Schild (ISO 14945:2021)
Petits navires - Plaque du constructeur (ISO 14945:2021)
Ta slovenski standard je istoveten z: EN ISO 14945:2021
ICS:
47.080 Čolni Small craft
SIST EN ISO 14945:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14945:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 14945:2021
EN ISO 14945
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 14945:2004
English Version
Small craft - Builder's plate (ISO 14945:2021)
Petits navires - Plaque du constructeur (ISO Kleine Wasserfahrzeuge - Hersteller-Schild (ISO
14945:2021) 14945:2021)
This European Standard was approved by CEN on 15 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14945:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14945:2021
EN ISO 14945:2021 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14945:2021
EN ISO 14945:2021 (E)
European foreword
This document (EN ISO 14945:2021) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by June 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14945:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 14945:2021 has been approved by CEN as EN ISO 14945:2021 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 14945:2021
EN ISO 14945:2021 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.