SIST EN 2816:2019

Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa

This document specifies the requirements relating to:
Steel FE-PM1802 (X5CrNiCu15-5)
Consumable electrode remelted
Solution treated and precipitation treated
Forgings
a or D ≤ 200 mm
Rm ≥ 965 MPa

Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNiCu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Schmiedestücke - a oder D ≤ 200 mm - Rm ≥ 965 MPa

Dieses Dokument legt die Anforderungen an
Stahl FE-PM1802 (X5CrNiCu15-5)
mit selbstverzehrender Elektrode umgeschmolzen,
lösungsgeglüht und ausgehärtet,
Schmiedestücke
a oder D ≤ 200 mm,
Rm ≥ 965 MPa,
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu à l'électrode consommable - Mis en solution et vieilli - Pièces forgées et pièces matricées - a ou D ≤ 200 mm - Rm ≥ 965 MPa

Cette présente Norme européenne spécifie les exigences relatives à :
Acier FE-PM1802 (X5CrNiCu15-5)
Refondu à l'électrode consommable
Mis en solution et précipité
Pièces forgées ou matricées
a ou D ≤ 200 mm
Rm ≥ 965 MPa
pour applications aérospatiales.

Aeronavtika - Jeklo FE-PM1802 (X5CrNiCu15-5) - Pretaljeno s taljivo elektrodo - Topilno žarjena in izločevalno utrjena - Izkovki - a ali D ≤ 200 mm - Rm ≥ 965 MPa

Ta dokument določa zahteve, ki se navezujejo na: jeklo FE-PM1802 (X5CrNiCu15-5) – pretaljeno s taljivo elektrodo – topilno žarjeno in izločevalno utrjeno – izkovke – a ali D ≤ 200 mm Rm ≥ 965 MPa

General Information

• Status: Published
• Publication Date: 08-Oct-2019
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Oct-2019
• Due Date: 09-Dec-2019
• Completion Date: 09-Oct-2019
• Ref Project: EN 2816:2019 - Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2019
Aeronavtika - Jeklo FE-PM1802 (X5CrNiCu15-5) - Pretaljeno s taljivo elektrodo -
Topilno žarjena in izločevalno utrjena - Izkovki - a ali D ≤ 200 mm - Rm ≥ 965 MPa
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted
- Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa
Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNiCu15-5) - Mit selbstverzehrender
Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Schmiedestücke - a oder
D ≤ 200 mm - Rm ≥ 965 MPa
Série aérospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu à l'électrode
consommable - Mis en solution et vieilli - Pièces forgées et pièces matricées - a ou D ≤
200 mm - Rm ≥ 965 MPa
Ta slovenski standard je istoveten z: EN 2816:2019
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2816
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) -
Consumable electrode remelted - Solution treated and
precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥
965 MPa
Série aérospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNiCu15-
Refondu à l'électrode consommable - Mis en solution et 5) - Mit selbstverzehrender Elektrode umgeschmolzen
- Lösungsgeglüht und ausgelagert - Schmiedestücke - a
vieilli - Pièces forgées et pièces matricées - a ou D ≤
oder D ≤ 200 mm - Rm ≥ 965 MPa
200 mm - Rm ≥ 965 MPa
This European Standard was approved by CEN on 30 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2816:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (EN 2816:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall be
withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rig
...