SIST EN ISO 10685-2:2013

Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2012)

This part of ISO 10685 specifies the commercial information and file format used for trading spectacle frames and sunglasses. This part of ISO 10685 includes sunglass clip-ons.

Augenoptik - Elektronischer Katalog und Warenbezeichnung für Brillenfassungen und Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO 10685-2:2012)

Dieser Teil von ISO 10685 legt die kaufmännischen Daten sowie das Datenformat fest, die beim Handel von Brillenfassungen und Sonnenbrillen-Fassungen angewendet werden. Dieser Teil von ISO 10685 gilt auch für Sonnenbrillen-Clips.

Optique ophtalmique - Catalogue de montures de lunettes et de lunettes de soleil et identification - Partie 2: Information commerciale (ISO 10685-2:2012)

L'ISO 10685-2:2012 spécifie les informations commerciales et le format de fichier utilisés pour la vente de montures de lunettes et de lunettes de soleil. Elle inclut les faces solaires.

Očesna optika - Elektronski katalog in identifikacija okvirjev očal in sončnih očal - 2. del: Tržne informacije (ISO 10685-2:2012)

Ta del standarda ISO 10685 določa tržne informacije in obliko zapisa datoteke, ki se uporablja za trgovanje z okvirji očal in sončnimi očali. Ta del standarda ISO 10685 zajema nastavke za sončna očala.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 19-Dec-2011
• Publication Date: 08-Jan-2013
• Withdrawal Date: 19-May-2016
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: VAZ - Healthcare
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-May-2016
• Due Date: 12-Jun-2016
• Completion Date: 20-May-2016
• Ref Project: EN ISO 10685-2:2012 - Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2012)

Relations

• Replaced By: SIST EN ISO 10685-2:2016 - Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version 2016-05-15)
• Effective Date: 01-Jun-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10685-2:2013
01-februar-2013
2þHVQDRSWLND(OHNWURQVNLNDWDORJLQLGHQWLILNDFLMDRNYLUMHYRþDOLQVRQþQLKRþDO
GHO7UåQHLQIRUPDFLMH,62
Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and
identification - Part 2: Commercial information (ISO 10685-2:2012)
Augenoptik - Elektronischer Katalog und Warenbezeichnung für Brillenfassungen und
Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO 10685-2:2012)
Optique ophtalmique - Catalogue de montures de lunettes et de lunettes de soleil et
identification - Partie 2: Information commerciale (ISO 10685-2:2012)
Ta slovenski standard je istoveten z: EN ISO 10685-2:2012
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 10685-2:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10685-2:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 10685-2:2013


EUROPEAN STANDARD
EN ISO 10685-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2012
ICS 11.040.70
English Version
Ophthalmic optics - Spectacle frames and sunglasses electronic
catalogue and identification - Part 2: Commercial information
(ISO 10685-2:2012)
Optique ophtalmique - Catalogue de montures de lunettes Augenoptik - Elektronischer Katalog und
et de lunettes de soleil et identification - Partie 2: Warenbezeichnung für Brillenfassungen und Sonnenbrillen
Informations commerciales (ISO 10685-2:2012) - Teil 2: Kaufmännische Daten (ISO 10685-2:2012)
This European Standard was approved by CEN on 7 December 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10685-2:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10685-2:2013
EN ISO 10685-2:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10685-2:2013
EN ISO 10685-2:2012 (E)
Foreword
This document (EN ISO 10685-2:2012) has been prepared by Technical Committee ISO/TC 172 "Optics and
photonics" in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the
latest by May 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10685-2:2012 has been approved by CEN as a EN ISO 10685-2:2012 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 10685-2:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 10685-2:2013
INTERNATIONAL ISO
STANDARD 10685-2
First edition
2012-11-15
Ophthalmic optics — Spectacle frames
and sunglasses electronic catalogue
and identification —
Part 2:
Commercial information
Optique ophtalmique — Catalogue de montures de lunettes et de
lunettes de soleil et identification —
Partie 2: Informations commerciales
Reference number
ISO 10685-2:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 10685-2:2013
ISO 10685-2:2012(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10685-2:2013
ISO 10685-2:2012(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 1
5 Commercial information . 1
5.1 Identification . 1
5.2 Commercial data for frames item catalogue . 2
Annex A (normative) Field descriptions. 4
Annex B (normative) Electronic frame catalogue schema (commercial section) .7
Annex C (informative) Electronic frame catalogue XML sample (commercial section) .8
Bibliography .11
© ISO 2012 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 10685-2:2013
ISO 10685-2:2012(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10685-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee
SC 7, Ophthalmic optics and instruments.
ISO 10685 consists of the following parts, under the general title Ophthalmic optics — Spectacle frames
and sunglasses electronic catalogue and identification:
— Part 1: Product identification and electronic catalogue product hierarchy
— Part 2: Commercial information
— Part 3: Technical information
iv © ISO 2012 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 10685-2:2013
INTERNATIONAL STANDARD ISO 10685-2:2012(E)
Ophthalmic optics — Spectacle frames and sunglasses
electronic catalogue and identification —
Part 2:
Commercial information
1 Scope
This part of ISO 10685 specifies the commercial information and file format used for trading spectacle
frames and sunglasses.
This part of ISO 10685 includes sunglass clip-ons.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 10685-1, Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification —
Part 1: Product identification and electronic catalogue product hierarchy
ISO 13666, Ophthalmic optics — Spectacle lenses — Vocabulary
ISO 16284, Ophthalmic optics — Information interchange for ophthalmic optical equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
commercial information
information needed to order frames and sunglasses
4 Symbols and abbreviated terms
MSRP manufacturer suggested retail price
5 Commercial information
5.1 Identification
Any commercial information requires the appropriate frame identification as specified in ISO 10685-1.
© ISO 2012 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 10685-2:2013
ISO 10685-2:2012(E)

5.2 Commercial data for frames item catalogue
The following tables specify the fields used to identify the commercial information portion of the
electronic frame item catalogue (see Table 1 and Table 2). Additional information and examples are
available in Annex A.
— The “name” column defines the tag and attribute names within the XML file (see Annex B for
schema definition).
— The “O/M” column indicates whether a field is optional (O) or mandatory (M).
— The “format” column indicates the data type, e.g. TEXT.
— The “length” column indicates the field character length. The decimal lengths listed do not include the
decimal point or the sign. For example, a field with the length of three could contain ‘100’,’10.1’ or ‘-1.01’.
— The “description” column is the description of the field.
Table 1 — Spectacle frame information for the commercial portion of the electronic frame
catalogue
NAME O/M FORMAT LENGTH DESCRIPTION
Usrtype M TEXT 1 TYPE OF USER
Usecod O TEXT 1 TYPE OF USE
Sdtpl O DATE 10 START DATE OF THE APPLICABLE WHOLESALE PRICE
Edtpl O DATE 10 END DATE OF THE APPLICABLE WHOLESALE PRICE
Prc O DECIMAL Max 13 WHOLESALE PRICE
Msrpsdtpl O DATE 10 START DATE OF MSRP PRICELIST
Msrpedtpl O DATE 10 END DATE OF MSRP PRICELIST
Msrp O DECIMAL Max 13 MANUFACTURER SUGGESTED RETAIL PRICE
Image O TEXT Max 50 NAME OF IMAGE FILE
Mcoldes O TEXT Max 50 MANUFACTURER COLOUR DESCRIPTION
Nrf O INTEGER Max 3 NRF CODE OR SUBSET OF NRF CODE FOR COLOUR
Fmtyp O TEXT 1 FRAME TYPE AS IT RELATES TO LENS MOUNTING
Mat M TEXT 1 MAIN MATERIAL
Jntspg O BOOLEAN 1 SPRUNG JOINT
Aspec O TEXT Max 100 ADDITIONAL SPECIFICATIONS OF THE FRAME
Shapes O TABLE SEE TABLE 3
Table 2 — Sunglass information for the commercial portion of the electronic frame catalogue
NAME O/M FORMAT LENGTH DESCRIPTION
Usrtype M TEXT 1 TYPE OF USER
Usecod O TEXT 1 TYPE OF USE
O DATE 10 START DATE OF THE APPLICABLE WHOLESALE
Sdtpl
PRICE
O DATE 10 END DATE OF THE APPLICABLE WHOLESALE
Edtpl
PRICE
Prc O DECIMAL Max 13 WHOLESALE PRICE
Msrpsdtpl O DATE 10 START DATE OF MSRP PRICELIST
2 © ISO 2012 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 10685-2:2013
ISO 10685-2:2012(E)

Table 2 (continued)
NAME O/M FORMAT LENGTH DESCRIPTION
Msrpedtpl O DATE 10 END DATE OF MSRP PRICELIST
Msrp O DECIMAL Max 13 MANUFACTURER SUGGESTED RETAIL PRICE
Image O TEXT Max 50 NAME OF IMAGE FILE
Mcoldes O TEXT Max 50 MANUFACTURER COLOUR DESCRIPTION
Nrf O INTEGER Max 3 NRF CODE OR SUBSET OF NRF CODE FOR COLOUR
Fmtyp O TEXT 1 FRAME TYPE AS IT RELATES TO LENS MOUNTING
Mat M TEXT 1 MAIN MATERIAL OF THE FRONT
SMat O TEXT 1 MAIN MATERIAL OF THE SIDE
Jntspg O BOOLEAN 1 SPRUNG JOINT
Aspec O TEXT Max 100 ADDITIONAL SPECIFICATIONS OF THE SUNGLASS
Shapes O TABLE SEE TABLE 3
Lsbcurv O DECIMAL Max 4 LENS BASE CURVE
O TEXT Max 50 LENS DESCRIPTION INCLUDING COLOURS AND
Ldes
RELATED PROPERTIES
O TEXT Max 50 CATEGORY OF THE LENS (CEN IN EUROPE, AS/
Ctyp
NZS IN AUSTRALIA, ANSI IN USA)
Rtyp O TEXT Max 100 RESTRICTION OF THE LENS
Fltyp O TEXT 1 FILTRATION TYPE OF THE LENS
Lmat O INTEGER 1 MATERIAL OF THE LENS
Table 3 — Rimless shapes
NAME O/M FORMAT LENGTH DESCRIPTION
Shpid M INTEGER Max 14 SHAPE ID
Shpdesc O TEXT Max 50 SHAPE DESCRIPTION
Shpimage O TEXT Max 50 SHAPE IMAGE FILE LINK
NOTE  Table 3 is repeatable. There can be multiple shapes for a rimless frame.
For sample XML file, see Annex C.
© ISO 2012 – All rights reserved 3

---------------------- Page: 13 ----------------------

SIST EN ISO 10685-2:2013
ISO 10685-2:2012(E)

Annex A
(normative)

Field descriptions
Table A.1 contains detailed field descriptions and examples for the electronic frame catalogue.
Table A.1 — Field of descriptions and examples for the electronic frame catalogue
NAME EXAMPLE COMMENTS/CODIFICA- Additional comments ebXML Mapping
TION
Usrtype B A – man, B – woman, Manufacturer code to ReferencedOpticProduct → Des-
C – child, D – unisex define gender type of ignatedOpticProduct Classifica-
frame. tion → ApplicableOpticProduct
Characteristic
Usecod A A – standard, B – sport ReferencedOpticProduct → Des-
ignatedOpticProduct Classifica-
tion → ApplicableOpticProduct
Characteristic
Sdtpl 1997-07-16 YYYY-MM-DDThh:mm:ssTZD An indication the ApplicableOpticTradeAgreement
T19:20:30+01:00 manufacturer has a price → ValidityDelimitedPeriod
change and the date
effective
Edtpl 1997-10-16 YYYY-MM-DDThh:mm:ssTZD An indication the ApplicableOpticTradeAgreement
T19:20:30+01:00 manufacturer has a price → ValidityDelimitedPeriod
change and the date it is
no longer effective
Prc 50.00 Wholesale price of the ApplicableOpticTradeAgreement
product → SpecifiedOpticPriceInforma-
tion → AssignedOpticPrice →
ChargeAmount
Msrpsdtpl 1997-07-16 YYYY-MM-DDThh:mm:ssTZD An indication the manu- ApplicableOpticTradeAgreement
T19:20:30+01:00 facturer has an MSRP → ValidityDelimitedPeriod
change and the date
effective
Msrpedtpl 1997-10-16 YYYY-MM-DDThh:mm:ssTZD An indication the manu- ApplicableOpticTradeAgreement
T19:20:30+01:00 facturer has an MSRP → ValidityDelimitedPeriod
change and the date it is
no longer effective
Msrp 130.00 Manufacturers Sug- ApplicableOpticTradeAgreement
gested Retail Price → SpecifiedOpticPriceInforma-
tion → AssignedOpticPrice →
ChargeAmount
Image ftp://xyz.com The frame image URL to MultimediaPresentationPicture
download the image. → DigitalImageBinaryObject
Mcoldes WHITE TRANS- ISO 16284 Frame colour description ReferencedOpticProduct →
PARENT given by the manufac- ColorDescription
turer
Nrf 205 National retail federation ReferencedOpticProduct → Des-
colour code (needed only ignatedOpticProduct Classifica-
for US) tion → ApplicableOpticProduct
Characteristic
Fmtyp A A – rim mount, B – semi- ReferencedOpticProduct →
rimless mount, C – rimless DesignatedOpticProduct Clas-
mount sification → SubClassCode (with
ClassCode=FrameClass)
4 © ISO 2012 – All rights reserved

---------------------- Page: 14 ----------------------

SIST EN ISO 10685-2:2013
ISO 10685-2:2012(E)

Table A.1 (continued)
NAME EXAMPLE COMMENTS/CODIFICA- Additional comments ebXML Mapping
TION
Mat A A – plastic, B – combination, Manufacturer to indicate ReferencedOpticProduct → Com-
D – metal, Z – other frame front main mate- posedOpticMaterial → Applica-
rial bleOpticProduct Characteristic
SMat A A – plastic, D – metal, Manufacturer to indicate ReferencedOpticProduct → Com-
Z – other frame side main material posedOpticMaterial → Applica-
bleOpticProduct Characteristic
Jntspg True Defines if the hinge is a ReferencedOpticProduct → Des-
sprung joint (true) or not ignatedOpticProduct Classifica-
(false) tion → ApplicableOpticProduct
Characteristic
Aspec Twinned pad Provide additional ReferencedOpticProduct → Des-
information for the dif- ignatedOpticProduct Classifica-
ferentiation of frames or tion → ApplicableOpticProduct
sunglass (i.e bridge type, Characteristic
temple tip, sun lens)
Shapes This table is depend- In Frame Shape product:
ent on the Fmtyp being ReferencedOpticProduct →
rimless. This can support DesignatedOpticPro
...