Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

D114/118: CLC/TC 48B disbanded

Steckverbinder für gedruckte Schaltungen für Frequenzen unter 3 MHz -- Teil 2: Bauartspezifikation für qualitätsbewertete indirekte Steckverbinder für gedruckte Schaltungen, Rastermaß 2,54 mm (0,1 in), mit gemeinsamen Einbaumerkmalen

Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées -- Partie 2: Spécification particulière pour connecteurs en deux parties pour cartes imprimées, avec assurance de la qualité, pour grilles de base de 2,54 mm (0,1 in) avec caractéristiques de montage communes

Konektorji za frekvence, nižje od 3 MHz, za uporabo na tiskanih vezjih – 2. del: Podrobna specifikacija za dvodelne konektorje z ocenjeno kakovostjo za tiskana vezja za osnovno mrežo 2,54 mm (0,1 in) s splošnimi lastnostmi za namestitev (IEC 60603-2:1995/A1:2000)

General Information

Status
Published
Publication Date
30-Nov-2005
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2005
Due Date
01-Dec-2005
Completion Date
01-Dec-2005

RELATIONS

Buy Standard

Amendment
SIST EN 60603-2:2002/A1:2005
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI SIST EN 60603-2:2002/A1:2005
STANDARD
december 2005
Konektorji za frekvence, nižje od 3 MHz, za uporabo na tiskanih vezjih – 2. del:
Podrobna specifikacija za dvodelne konektorje z ocenjeno kakovostjo za
tiskana vezja za osnovno mrežo 2,54 mm (0,1 in) s splošnimi lastnostmi za
namestitev (IEC 60603-2:1995/A1:2000)

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail

specification for two-part connectors with assessed quality, for printed boards, for

basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-
2:1995/A1:2000)
ICS 31.220.10 Referenčna številka
SIST EN 60603-2:2002/A1:2005(en)

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60603-2/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2005
ICS 31.220.10
English version
Connectors for frequencies below 3 MHz for use with printed boards
Part 2: Detail specification for two-part connectors with assessed quality,
for printed boards, for basic grid of 2,54 mm (0,1 in)
with common mounting features
(IEC 60603-2:1995/A1:2000)

Connecteurs pour fréquences inférieures Steckverbinder für gedruckte Schaltungen

à 3 MHz pour utilisation für Frequenzen unter 3 MHz
avec cartes imprimées Teil 2: Bauartspezifikation für
Partie 2: Spécification particulière pour qualitätsbewertete indirekte
connecteurs en deux parties pour cartes Steckverbinder für gedruckte
imprimées, avec assurance de la qualité, Schaltungen, Rastermaß 2,54 mm
pour grilles de base de 2,54 mm (0,1 in) (0,1 in), mit gemeinsamen
avec caractéristiques de montage Einbaumerkmalen
communes (IEC 60603-2:1995/A1:2000)
(CEI 60603-2:1995/A1:2000)

This amendment A1 modifies the European Standard EN 60603-2:1998; it was approved by CENELEC

on 2005-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this amendment the status of a national standard without any

alteration.
Up-to-date lists and bibliographi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.