iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50295:2001

(Main)

Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i)

Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i)

This standard specifies requirements for a bit-oriented interface system between a single controlling device and control circuit devices or switching elements as defined in EN 60947-1, connected by an unshielded, untwisted two-wire cable carrying data and power. It also enables the interchangeability of components which have such interfaces. This standard specifies: requirements for interfaces and for electromechanical structures for slaves and masters; performance of slaves, electromechanical structures and masters under normal service conditions; constructional and performance requirements; tests to verify conformance to the requirements. Specific requirements for the various profiles for slaves and masters are given in annexes A and B. NOTE 1: The standardized low-voltage switchgear and controlgear products covered by the EN 60947 series are: EN 60947-1: General rules; EN 60947-2: Circuit-breakers; EN 60947-3: Switches, disconnectors, switch-disconnectors and fuse-combination units; EN 60947-4:Contactors and motor-starters; EN 60947-5: Control-circuit devices and switching elements; EN 60947-6: Multiple function equipment; EN 60947-7: Ancillary equipment. NOTE 2: Where inputs and outputs (I/O) are described in this standard, their meaning is relative to the master. The meaning relative to the application is the opposite

Niederspannungsschaltgeräte - Steuerungs- und Geräte-Interface Systeme - Aktuator Sensor Interface (AS-i)

Appareillage à basse tension - Systèmes d'interface appareil de commande - appareils - Interface capteur-actionneur (AS-i)

Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i)

General Information

Status
Withdrawn
Publication Date
28-Feb-2001
Withdrawal Date
17-Jan-2016
ICS
29.130.20 - Low voltage switchgear and controlgear
Technical Committee
SKA - Switchgear and control gear
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Jan-2016
Due Date
06-Feb-2016
Completion Date
18-Jan-2016
Directive
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
EN 50295:1999 - Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i)

Relations

Replaced By
SIST EN 62026-2:2013 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) (IEC 62026-2:2008, modified)
Effective Date
01-Jun-2013
Replaced By
SIST EN 62026-2:2013 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) (IEC 62026-2:2008, modified)
Effective Date
29-Jan-2023

Buy Standard

EN 50295:2001EN 50295:2001
PreviousNext
Standard
EN 50295:2001
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50295:2001
01-marec-2001
Low-voltage switchgear and controlgear - Controller and device interface systems
- Actuator Sensor interface (AS-i)
Low-voltage switchgear and controlgear - Controller and device interface systems -
Actuator Sensor interface (AS-i)
Niederspannungsschaltgeräte - Steuerungs- und Geräte-Interface Systeme - Aktuator
Sensor Interface (AS-i)
Appareillage à basse tension - Systèmes d'interface appareil de commande - appareils -
Interface capteur-actionneur (AS-i)
Ta slovenski standard je istoveten z: EN 50295:1999
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN 50295:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50295:2001

---------------------- Page: 2 ----------------------

SIST EN 50295:2001

---------------------- Page: 3 ----------------------

SIST EN 50295:2001

---------------------- Page: 4 ----------------------

SIST EN 50295:2001

---------------------- Page: 5 ----------------------

SIST EN 50295:2001

---------------------- Page: 6 ----------------------

SIST EN 50295:2001

---------------------- Page: 7 ----------------------

SIST EN 50295:2001

---------------------- Page: 8 ----------------------

SIST EN 50295:2001

---------------------- Page: 9 ----------------------

SIST EN 50295:2001

---------------------- Page: 10 ----------------------

SIST EN 50295:2001

---------------------- Page: 11 ----------------------

SIST EN 50295:2001

---------------------- Page: 12 ----------------------

SIST EN 50295:2001

---------------------- Page: 13 ----------------------

SIST EN 50295:2001

---------------------- Page: 14 ----------------------

SIST EN 50295:2001

---------------------- Page: 15 ----------------------

SIST EN 50295:2001

---------------------- Page: 16 ----------------------

SIST EN 50295:2001

---------------------- Page: 17 ----------------------

SIST EN 50295:2001

---------------------- Page: 18 ----------------------

SIST EN 50295:2001

---------------------- Page: 19 ----------------------

SIST EN 50295:2001

---------------------- Page: 20 ----------------------

SIST EN 50295:2001

---------------------- Page: 21 ----------------------

SIST EN 50295:2001

---------------------- Page: 22 ----------------------

SIST EN 50295:2001

---------------------- Page: 23 ----------------------

SIST EN 50295:2001

---------------------- Page: 24 ----------------------

SIST EN 50295:2001

---------------------- Page: 25 ----------------------

SIST EN 50295:2001

---------------------- Page: 26 ----------------------

SIST EN 50295:2001

---------------------- Page: 27 ----------------------

SIST EN 50295:2001

---------------------- Page: 28 ----------------------

SIST EN 50295:2001

---------------------- Page: 29 ----------------------

SIST EN 50295:2001

---------------------- Page: 30 ----------------------

SIST EN 50295:2001

---------------------- Page: 31 ----------------------

SIST EN 50295:2001

---------------------- Page: 32 ----------------------

SIST EN 50295:2001

---------------------- Page: 33 ----------------------

SIST EN 50295:2001

---------------------- Page: 34 ----------------------

SIST EN 50295:2001

---------------------- Page: 35 ----------------------

SIST EN 50295:2001

---------------------- Page: 36 ----------------------

SIST EN 50295:2001

---------------------- Page: 37 ----------------------

SIST EN 50295:2001

---------------------- Page: 38 ----------------------

SIST EN 50295:2001

---------------------- Page: 39 ----------------------

SIST EN 50295:2001

---------------------- Page: 40 ----------------------

SIST EN 50295:2001

---------------------- Page: 41
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60947-6-2:2023/AC:2023(Corrigendum)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020/COR2:2023)
EN IEC 60947-6-2:2023/AC:2023-07
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP IEC TR 61439-0:2023(Main)
Low-voltage switchgear and controlgear assemblies- Part 0: Guidance to specifying assemblies
IEC TR 61439-0:2022

IEC TR 61439-0:2022 standards for low-voltage switchgear and controlgear assemblies, there are system and application details that are specified by the specifier to enable the manufacturer to produce an assembly that meets the needs and expectations of the specifier.
IEC/TR 61439-0:2022, identifies from the specifier’s perspective those functions and characteristics that are defined when specifying assemblies. It provides:
an explanation of the assembly characteristics and options within the IEC 61439 series;
a guidance on how to select the appropriate options and define characteristics so as to meet specific application needs; and
an assistance in the specification of assemblies.  References within this document to the interface characteristics of an assembly and the requirements with which they will comply assume that the assembly is designed, manufactured, and verified in accordance with the relevant part of the IEC 61439 series.
This third edition cancels and replaces the second edition published in 2013. It constitutes a technical revision.
This third edition includes the following significant technical changes with respect to the previous edition:  
alignment with IEC 61439-1:2020;
addition of new content in Clause 13 regarding current ratings;
addition of a new subclause 12.8.1 detailing the fundamentals of the forms of internal separation;
alignment of Annex B with Annex AA of 61439-2:2020;
removal of the annexes detailing items subject to agreement between specifier and manufacturer for all product parts as not all of them can always be up to date

  • Technical report
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    136 pages
    English and French language
    sale 15% off
SIST
SIST EN IEC 60947-6-1:2023(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2021)
EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-8:2023(Main)
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2021)
EN IEC 60947-8:2023

This part of IEC 60947 series specifies requirements for control units, which control a switching device in response to the PTC thermistors incorporated in rotating electrical machines and the industrial application.
It specifies requirements for that type of system comprising a positive temperature coefficient (PTC) thermistor having particular characteristics, and its associated control unit.
This document includes:
- the characteristics, construction, performance and tests of the control unit; and
- its association with a PTC thermistor designated "Mark A".
This document does not cover:
- the incorporation of thermal protections into rotating machines and their maximum winding temperature. See IEC 60034-11;
- use of the product within explosive atmospheres (see IEC 60079 series);
- software and firmware requirements;
NOTE 1 Guidance on embedded software is given in IEC TR 63201.
- cyber security aspects (see IEC TS 63208).
NOTE 2 It is not possible to specify all the requirements for the operating characteristics of a control unit, as they are dependent on some aspects of the PTC thermistors. Some aspects of the requirements of the thermal protector system can only be specified when account is taken of the characteristics of the rotating machine to be protected and the method of installation of the PTC thermistor within the machine.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-6-2:2023(Main)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020 + COR1:2021)
EN IEC 60947-6-2:2023

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfil additional functions, such as isolation.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-4-2:2023(Main)
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters (IEC 60947-4-2:2020)
EN IEC 60947-4-2:2023

IEC 60947-4-2:2020 applies to semiconductor motor controllers, starters and soft-starters which can include a series mechanical switching device, intended to be connected to circuits the rated voltage of which does not exceed 1 000 V AC.
This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- scope exclusions;
- editorial correction of notes and hanging paragraphs;
- reference to IEC 62683-1;
- safety aspects related to:
- general aspects;
- limited energy circuits;
- electronic circuits;
- mention of dedicated wiring accessories;
- power consumption measurement;
- alignment to IEC 60947-1:2020.

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-1:2021/AC:2023(Corrigendum)
Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:2020/COR1:2022)
EN IEC 60947-1:2021/AC:2023-01
  • Corrigendum
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-5-2:2020/A11:2022(Amendment)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
EN IEC 60947-5-2:2020/A11:2022

EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61439-1:2021/AC:2022(Corrigendum)
Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020/COR1:2021)
EN IEC 61439-1:2021/AC:2022-01

IEC Corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021/AC:2022(Corrigendum)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020/COR1:2021)
EN IEC 60947-3:2021/AC:2021-11

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day