oSIST prEN 15088:2016
(Main)Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
This European Standard specifies requirements for semi-finished products and castings of aluminium and aluminium alloys for load-bearing structural construction works (Construction works covers building and civil engineering works). It also specifies requirements for evaluation of conformity and the test methods to be used. It does not apply to products after machining or joining operations (e.g. bolting, welding of elements), which can be found in other European Standards, e.g. prEN 1090-1
Aluminium und Aluminiumlegierungen - Erzeugnisse für Tragwerksanwendungen - Technische Lieferbedingungen
Diese Europäische Norm legt die Anforderungen an die Konformitätsbewertung von Leistungseigenschaften für halbfertige tragende Aluminiumbauprodukte fest, die für tragende Bauwerke, die Hoch- und Ingenieurbauwerke gleichermaßen umfassen, verwendet werden.
Diese Europäische Norm legt Erzeugniseigenschaften, Prüfbewertung, Probenahmeverfahren und Konformitätsbewertung unter Berücksichtigung von Produktionseigenschaften fest.
Diese Europäische Norm umfasst Halbzeuge, die ohne weitere Bearbeitung (z. B. Schneiden, Bohren) möglicherweise nicht in tragende Erzeugnisse passen.
Diese Europäische Norm gilt nicht für Erzeugnisse, die aus Halbzeugen erstellt wurden und nach ihrer Veränderung an bestimmten tragenden Bauprodukten verwendet werden, wie in EN 1090-1 beschrieben.
Diese Europäische Norm gilt nicht für Bauprodukte, die durch Verbindungsarbeiten hergestellt werden (z. B. Verbolzen, Schweißen), wie in EN 1090-1 beschrieben.
Aluminium et alliages d'aluminium - Produits pour applications de structure pour construction - Conditions techniques de contrôle et de livraison
La présente Norme européenne spécifie les exigences pour l’évaluation de la conformité aux caractéristiques de performance pour les demi-produits structuraux de construction en aluminium qui sont utilisés sur les ouvrages de construction structurels porteurs, englobant à la fois les ouvrages de bâtiments et de génie civil.
La présente Norme européenne spécifie les caractéristiques du produit, l'évaluation par des essais, les méthodes d'échantillonnage et l'évaluation de la conformité couvrant les caractéristiques de fabrication.
La présente Norme européenne couvre les demi-produits qui peuvent ne pas constituer des produits structuraux sans transformation supplémentaire (par exemple découpe, perçage).
La présente Norme européenne ne s’applique pas aux produits qui sont fabriqués à partir de demi-produits et qui après transformation sont utilisés sur des produits de construction structurels particuliers, couverts par l'EN 1090-1.
La présente Norme européenne ne s’applique pas aux produits de construction qui sont fabriqués par des opérations d’assemblage (par exemple boulonnage, soudage), couverts par l'EN 1090-1.
Aluminij in aluminijeve zlitine - Gradbeni proizvodi za konstrukcijska dela - Tehnični pogoji za prevzem in dobavo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 15088:2016
01-oktober-2016
$OXPLQLMLQDOXPLQLMHYH]OLWLQH*UDGEHQLSURL]YRGL]DNRQVWUXNFLMVNDGHOD
7HKQLþQLSRJRML]DSUHY]HPLQGREDYR
Aluminium and aluminium alloys - Structural products for construction works - Technical
conditions for inspection and delivery
Aluminium und Aluminiumlegierungen - Erzeugnisse für Tragwerksanwendungen -
Technische Lieferbedingungen
Aluminium et alliages d'aluminium - Produits pour applications de structure pour
construction - Conditions techniques de contrôle et de livraison
Ta slovenski standard je istoveten z: prEN 15088
ICS:
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 15088:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15088:2016
---------------------- Page: 2 ----------------------
oSIST prEN 15088:2016
DRAFT
EUROPEAN STANDARD
prEN 15088
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 77.150.10 Will supersede EN 15088:2005
English Version
Aluminium and aluminium alloys - Structural products for
construction works - Technical conditions for inspection
and delivery"
Aluminium et alliages d'aluminium - Produits pour Aluminium und Aluminiumlegierungen - Erzeugnisse
applications de structure pour construction - für Tragwerksanwendungen - Technische
Conditions techniques de contrôle et de livraison Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15088:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols, units and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 9
3.3 Symbols . 9
4 Products characteristics . 10
4.1 General . 10
4.1.1 Introduction . 10
4.1.2 Ordering Information . 10
4.1.3 Selection of alloy and temper . 10
4.2 Tolerances on dimension and shape . 10
4.3 Mechanical properties . 10
4.4 Fatigue strength . 11
4.5 Bendability . 11
4.6 Weldability . 11
4.7 Dangerous substances . 11
4.8 Durability against corrosion . 11
5 Testing, Assessment and sampling methods . 12
5.1 General . 12
5.2 Tolerances on dimension and shape . 13
5.3 Mechanical properties . 13
5.4 Fatigue strength . 13
5.5 Bendability . 13
5.6 Weldability . 13
5.7 Dangerous substances . 13
5.8 Durability against corrosion . 13
6 Assessment and verification of constancy of performance . 14
6.1 General . 14
6.2 Type testing . 14
6.2.1 General . 14
6.2.2 Test samples, testing and compliance criteria . 15
6.2.3 Test reports . 15
6.2.4 Shared other party results . 15
6.2.5 Cascading determination of the product type results . 16
6.3 Factory production control (FPC) . 17
6.3.1 General . 17
6.3.2 Requirements . 18
6.3.3 Product specific requirements . 20
6.3.4 Initial inspection of factory and of FPC . 21
6.3.5 Continuous surveillance of FPC . 21
2
---------------------- Page: 4 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
6.3.6 Procedure for modifications . 21
6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced
in very low quantity . 22
Annex A (normative) Fatigue testing and design of extruded, rolled or forged products . 23
A.1 General . 23
A.2 Fatigue testing of the constituent material (extruded, rolled or forged products) . 23
A.3 Test piece for fatigue testing . 24
A.4 Design code . 25
Annex B (normative) Bendability . 26
B.1 General . 26
B.2 Bendability classes . 27
B.3 Assignment to standardized tempers of semi-finished products . 28
Annex C (informative) Characteristics and performances of semi-finished structural
aluminium products . 31
Annex ZA (informative) Relation of this European Standard with Regulation (EU) No.
305/2011 . 32
ZA.1 Scope and relevant characteristics . 32
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 32
ZA.3 Assignment of AVCP tasks . 33
Bibliography . 34
3
---------------------- Page: 5 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
European foreword
This document (prEN 15088:2016) has been prepared by Technical Committee CEN/TC 132
“Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Regulation No. 305/2011.
For relationship with EU Regulation No. 305/2011, see informative Annex ZA, which is an integral part
of this document.
This document will supersede EN 15088:2005.
In comparison with EN 15088:2005, the following significant changes were made:
a) compliance with the Construction Product Regulation provisions;
b) respect of the latest CEN templates (Chapter 6 and Annex ZA);
c) improvements on Bendability.
4
---------------------- Page: 6 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
Introduction
This European Standard is an “umbrella” standard which gives the regulatory requirements to enable
manufacturers or their agents to affix CE marking, in accordance with Regulation (EU) No 305/2011 of
the European Parliament an and The Council of 9 March 2011 laying down harmonized conditions for
the marketing of construction products and repealing Council Directive 89/106/EEC within the scope
of this European Standard.
A manufacturer who has no knowledge of its final destination may sell a semi-finished structural
aluminium product to a stockist. It is the responsibility of the manufacturer that the semi-finished
structural aluminium product complies with the conditions of CE marking for the stated intended use
that is included as part of the CE marking. If a stockist resells the product for another intended use or
transforms the product in a way, he becomes a new manufacturer that, depended on the intended use of
the transformed product, may need to comply with another harmonized technical specification.
Products CE marked in accordance with this European Standard can be presumed to have the
performances stated with the CE marking. This does not replace the responsibility of the designer to
ensure that the final structural product is correctly designed and its components meet the necessary
performance values depending on the design, especially in view of fatigue design.
5
---------------------- Page: 7 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
1 Scope
This European Standard specifies requirements for conformity assessment of performance
characteristics for semi-finished structural aluminium construction products that are used on load
bearing structural construction works, covering both building and civil engineering works.
This European standard specifies product characteristics, testing assessment, sampling methods and
conformity assessment covering manufacturing characteristics.
This European standard covers semi-finished products which may not fit into structural products
without any further transformation (e.g. cutting, drilling).
This European standard does not apply to products which are produced from semi-finished products
and after transformation are used on particular structural construction products, covered by
EN 1090-1.
This European standard does not apply to construction products that are produced with joining
operations (e.g. bolting, welding), covered by EN 1090-1.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 485-1, Aluminium and aluminium alloys — Sheet, strip and plate — Part 1: Technical conditions for
inspection and delivery
EN 485-2, Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
EN 485-3, Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and
form for hot-rolled products
EN 485-4, Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and
dimensions for cold-rolled products
EN 515, Aluminium and aluminium alloys - Wrought products - Temper designations
EN 573-3, Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part
3: Chemical composition and form of products
EN 586-1, Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and
delivery
EN 586-2, Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional
property requirements
EN 586-3, Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
EN 754-1, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions
for inspection and delivery
EN 754-2, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical
properties
6
---------------------- Page: 8 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
EN 754-3, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars,
tolerances on dimensions and form
EN 754-4, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars,
tolerances on dimensions and form
EN 754-5, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars,
tolerances on dimensions and form
EN 754-6, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars,
tolerances on dimensions and form
EN 754-7, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes,
tolerances on dimensions and form
EN 754-8, Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes,
tolerances on dimensions and form
EN 755-1, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical
conditions for inspection and delivery
EN 755-2, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical
properties
EN 755-3, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars,
tolerances on dimensions and form
EN 755-4, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars,
tolerances on dimensions and form
EN 755-5, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular
bars, tolerances on dimensions and form
EN 755-6, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal
bars, tolerances on dimensions and form
EN 755-7, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes,
tolerances on dimensions and form
EN 755-8, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes,
tolerances on dimensions and form
EN 755-9, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles,
tolerances on dimensions and form
EN 1301-1, Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection
and delivery
EN 1301-2, Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
EN 1301-3, Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
EN 1386, Aluminium and aluminium alloys - Tread plate - Specifications
7
---------------------- Page: 9 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
EN 1396, Aluminium and aluminium alloys - Coil coated sheet and strip for general applications -
Specifications
EN 1559-1, Founding - Technical conditions of delivery - Part 1: General
EN 1559-4, Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium
alloy castings
EN 1706, Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN 1999-1-1, Eurocode 9: Design of aluminium structures — Part 1-1: General rules
EN 1999-1-3, Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue
EN 12020-1, Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN
AW-6063 - Part 1: Technical conditions for inspection and delivery
EN 12020-2, Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN
AW-6063 - Part 2: Tolerances on dimensions and form
EN 12258-1, Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
ISO 8062 (all parts), Geometrical product specifications (GPS) - Dimensional and geometrical tolerances
for moulded parts
3 Terms, definitions, symbols, units and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 12258-1 and the following
apply.
3.1.1
semi-finished structural aluminium construction product
any aluminium product which is placed on the market that could be transformed into a structural
component with respect to the basic requirements for construction works number 1 and 3
3.1.2
structural component
components to be used as load-bearing part of works designed to provide mechanical resistance and
stability to the works and/or fire resistance, including aspects of durability and serviceability; which
can be used directly as delivered or can be incorporated into a construction work
3.1.3
semi-finished structural aluminium product family
group of semi-finished products of the same series of aluminium alloys, process (i.e.: extrusion, rolled,
casting, forging) and similar kind of temper that is produced by the same production line
Note 1 to entry: The manufacturer has experience to decide how to group his products range with the aim to
prove that his production line is constant and he is able to deliver products that conform to this standard.
EXAMPLE 1 For extrusion: EN AW 6060-T6 is in the same product family as EN AW 6082-T5.
EXAMPLE 2 For rolling: EN AW 5005-O is in the same product family as EN AW 5083-H24.
8
---------------------- Page: 10 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
3.1.4
one-off product
semi-finished structural aluminium product that is produced once and for the first time and clearly
deviating from the normal production programme
3.2 Abbreviations
AVCP Assessment and verification of constancy of performance
CWFT Classification without Further Testing
DoP Declaration of Performance
EC European Commission
EFTA European Free Trade Association
EU European Union
FPC Factory production control
OJEU Official journal of the European Union
UTS Ultimate Tensile Strength
3.3 Symbols
d Sheet thickness / profile height
f Bending factor
b
r Inner radius
i
r Minimum inner radius
i min
t Original thickness of the product
F Fatigue test factor
N Number of cycles derived from test
results
R Stress ratio
d Sheet thickness / profile height
α Bending angle
σ Stress
σ Minimum stress
min
σ Maximum stress
max
9
---------------------- Page: 11 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
4 Products characteristics
4.1 General
4.1.1 Introduction
The ordering information as well as the details on how the selection of the alloy and its temper, are
given on 4.1.2 and 4.1.3 respectively.
The characteristics for structural material shall be determined and expressed in accordance with 4.2 to
4.6.
NOTE The conformity with the requirements in this European Standard may be given using e.g. Type 3.1
inspection certificate structure in accordance with EN 10204:2004.
4.1.2 Ordering Information
The following information shall be obtained by the manufacturer when a particular order is given:
a) Description of the product in accordance with Table 1, column “Product”;
b) reference to this European Standard with dated reference;
c) Designation of the aluminium alloy and temper shall be given in accordance to EN 573-3, EN 515
for wrought products and EN 1706 for castings. To use these alloys and tempers, their performance
characteristics should be either included in EN 1999-1-1 or be available by testing
d) For particular cases, any additional requirements to those specified in this clause (e.g.: extrusion
seams; surface condition) together with the appropriate European Standards or requirements to
demonstrate conformity.
If the order agreed between manufacturer and purchaser contains special requirements, which differ
from those specified or referenced in this European Standard, then these special requirements shall
apply in addition, insofar as they do not conflict with this European Standard.
4.1.3 Selection of alloy and temper
To conform to the required function and use for the fabrication of aluminium structures, the
manufacturer shall choose an alloy with a temper in accordance to 5.1.
4.2 Tolerances on dimension and shape
The ability of the product to be used on applications with particular requirements in regards to
dimension and shape.
When assessed in accordance to 5.2, results shall be declared.
4.3 Mechanical properties
The following mechanical properties are relevant for aluminium semi-finished products:
— tensile strength, commonly known as ultimate tensile strength (UTS);
— yield strength;
— elongation, the process of lengthening.
10
---------------------- Page: 12 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
When assessed in accordance to 5.3, results shall be declared.
4.4 Fatigue strength
Where required, the ability of the product to prove its fatigue performance.
4.5 Bendability
Where required, the ability of the product to bend without breaking.
4.6 Weldability
The ability of the product to be welded.
When assessed in accordance to 5.6, results shall be declared.
4.7 Dangerous substances
None of the materials used for manufacturing and coating products covered by this standard shall
release cadmium or emit radioactivity exceeding the limits established by national regulations of
Member States where the products have to be used.
When assessed in accordance to 5.7, results shall be declared.
4.8 Durability against corrosion
Durability for a reasonable economic working lifetime is generally ensured by the inherent corrosion
resistance of the product.
Durability against corrosion shall be dealt in accordance to 5.8.
11
---------------------- Page: 13 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
5 Testing, Assessment and sampling methods
5.1 General
The requirements and test methods on structural material for construction works shall be as specified
in the standards given in Table 1.
Table 1 — Requirements and general provisions
General Properties’ requirements
provisions /
Product
Tolerances on dimension
Assessment and
Mechanical properties
and shape
test methods
round: EN 755–3
square: EN 755–4
Extruded rod/bar EN 755–1 EN 755–2
rectangular: EN 755–5
hexagonal: EN 755–6
Extruded tube EN 755–1 EN 755–2 seamless: EN 755–7
porthole/bridge: EN 755–8
Extruded profile EN 755–1 EN 755–2 EN 755–9
Precision profile EN 12020–1 EN 755–2 EN 12020–2
hot-rolled: EN 485–3
Sheet / plate / strip EN 485–1 EN 485–2
cold-rolled: EN 485–4
Coil-coated sheet and
EN 1396 EN 1396 EN 1396
strip
Tread plate EN 1386 EN 1386 EN 1386
round: EN 754–3
square: EN 754–4
Cold-drawn rod / bar EN 754–1 EN 754–2
rectangular: EN 754–5
hexagonal: EN 754–6
seamless tube: EN 754–7
Drawn tube EN 754–1 EN 754–2
porthole/bridge tube:
EN 754–8
Drawn wire EN 1301–1 EN 1301–2 EN 1301–3
a)
Casting EN 1559–1, EN 1706 ISO 8062
EN 1559–4
Forging EN 586–1 EN 586–2 EN 586–3
a)
Casting alloys for semi-finished structural aluminium products shall be chosen in accordance with the
requirements of EN 1999–1-1.
12
---------------------- Page: 14 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
A new or modified alloy could demonstrate its properties by issuing a European Technical Assessment,
until the EN 1999-1-1 classification is extended to include the new or modified alloy.
5.2 Tolerances on dimension and shape
The tolerances on dimension and shape shall conform to those specified in the European Standards
given in Table 1.
5.3 Mechanical properties
The mechanical properties shall conform to those specified in the European Standards given in Table 1
and without exceeding limit values for:
— tensile strength:
— yield strength;
— elongation.
5.4 Fatigue strength
When required
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.