Fixed capacitors for use in electronic equipment -- Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors

is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have self healing properties depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage.

Festkondensatoren zur Verwendung in Geräten der Elektronik -- Teil 23: Rahmenspezifikation - Oberflächenmontierbare metallisierte Polyethylen-Naphthalat-Folienkondensatoren für Gleichspannung

Condensateurs fixes utilisés dans les équipements électroniques -- Partie 23: Spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polyéthylène naphtalate métallisé

PE

Pritrjeni kondenzatorji za uporabo v elektronski opremi – 23. del: Področna specifikacija – Pritrjeni DC kondenzatorji za površinsko namestitev z dielektrikom iz metaliziranega polietilenskega naftalatnega filma (IEC 60384-23:2005)

General Information

Status
Withdrawn
Publication Date
30-Nov-2005
Withdrawal Date
19-Aug-2018
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Aug-2018
Due Date
01-Sep-2018
Completion Date
20-Aug-2018

Relations

Buy Standard

Standard
EN 60384-23:2005
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60384-23:2005

STANDARD
december 2005
Pritrjeni kondenzatorji za uporabo v elektronski opremi – 23. del: Področna
specifikacija – Pritrjeni DC kondenzatorji za površinsko namestitev z
dielektrikom iz metaliziranega polietilenskega naftalatnega filma (IEC 60384-
23:2005)
Fixed capacitors for use in electronic equipment – Part 23: Sectional specification –
Fixed surface mount metallized polyethylene naphthalate film dielectric DC
capacitors (IEC 60384-23:2005)
ICS 31.060.10 Referenčna številka
SIST EN 60384-23:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60384-23
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2005

ICS 31.060.10


English version


Fixed capacitors for use in electronic equipment
Part 23: Sectional specification –
Fixed surface mount metallized polyethylene naphthalate
film dielectric DC capacitors
(IEC 60384-23:2005)


Condensateurs fixes utilisés  Festkondensatoren zur Verwendung
dans les équipements électroniques in Geräten der Elektronik
Partie 23: Spécification intermédiaire Teil 23: Rahmenspezifikation –
Condensateurs fixes pour montage Oberflächenmontierbare metallisierte
en surface pour courant continu Polyethylen-Naphthalat-
à diélectrique en film de polyéthylène Folienkondensatoren für Gleichspannung
naphtalate métallisé (IEC 60384-23:2005)
(CEI 60384-23:2005)

This European Standard was approved by CENELEC on 2005-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60384-23:2005 E

---------------------- Page: 2 ----------------------

EN 60384-23:2005 - 2 -
Foreword
The text of document 40/1503/FDIS, future edition 1 of IEC 60384-23, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60384-23 on 2005-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-23:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60384-23:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60062 2004 Marking codes for resistors and - -
capacitors

IEC 60063 1963 Preferred number series for resistors and - -
capacitors
A1 1967 - -
A2 1977 - -

1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance

IEC 60384-1 1999 Fixed capacitors for use in electronic EN 60384-1 2001
(mod) equipment + Corr. October 2001
Part 1: Generic specification

1)
IEC 60410 - Sampling plans and procedures for - -
inspection by attributes

ISO 3 1973 Preferred numbers - Series of preferred - -
numbers



1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
60384-23
INTERNATIONAL
Première édition
STANDARD
First edition
2005-02
Condensateurs fixes utilisés
dans les équipements électroniques –
Partie 23:
Spécification intermédiaire –
Condensateurs fixes pour montage en surface
pour courant continu à diélectrique en film
de polyéthylène naphtalate métallisé
Fixed capacitors for use in electronic equipment –
Part 23:
Sectional specification –
Fixed surface mount metallized polyethylene
naphthalate film dielectric DC capacitors
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
PRICE CODE T
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60384-23 ¤ IEC:2006 – 3 –
CONTENTS
FOREWORD.5
1 General .11
1.1 Scope.11
1.2 Object .11
1.3 Normative references .11
1.4 Information to be given in a detail specification .13
1.5 Terms and definitions .15
1.6 Marking .15
2 Preferred ratings and characteristics .17
2.1 Preferred characteristics .17
2.2 Preferred values of ratings .19
3 Quality assessment procedures.19
3.1 Primary stage of manufacture.19
3.2 Structurally similar components.19
3.3 Certified records of released lots.21
3.4 Qualification approval.21
3.5 Quality conformance inspection.33
4 Test and measurement procedures.37
4.1 Mounting .37
4.2 Visual examination and check of dimensions.37
4.3 Electrical tests.37
4.4 Shear .43
4.5 Substrate bending test .43
4.6 Resistance to soldering heat .43
4.7 Solderability .43
4.8 Rapid change of temperature .45
4.9 Climatic sequence .45
4.10 Damp heat, steady state.47
4.11 Endurance.47
4.12 Charge and discharge .49
4.13 Component solvent resistance (if applicable).49
4.14 Solvent resistance of the marking (if applicable).49
Table 1 – Fixed sample size test plan for qualification approval Assessment level EZ.23
Table 2 – Test schedule for qualification approval.25
Table 3 – Lot-by-lot inspection .35
Table 4 – Periodic tests .35
Table 5 – Test voltages.37
Table 6 – Tangent of loss angle limits.39
Table 7 – Requirements insulation resistance .41
Table 8 – Correction factor dependent on test temperature.41
Table 9 – Endurance test Grade 1 and Grade 2 capacitors .47
Table 10 – Endurance test Grade 3 capacitors.47

---------------------- Page: 6 ----------------------

60384-23 ¤ IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 23: Sectional specification –
Fixed surface mount metallized polyethylene naphthalate film
dielectric DC capacitors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-23 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This bilingual version (2006-05) replaces the English version.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1503/FDIS 40/1532/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.

---------------------- Page: 7 ----------------------

60384-23 ¤ IEC:2006 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in
electronic equipment:
Part 1: Generic specification
Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric
DC capacitors
Part 3: Sectional specification: Fixed tantalum chip capacitors
Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid
electrolyte
Part 5: Sectional specification: Fixed mica dielectric DC capacitors with a rated voltage
not exceeding 3000 V - Selection of methods of test and general requirements
Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric DC
capacitors
Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil DC capacitors
Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil
DC capacitors
Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil DC
capacitors
Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil DC
capacitors
Part 14: Sectional specification: Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains
Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid
electrolyte
Part 16: Sectional specification: Fixed metallized polypropylene film dielectric DC
capacitors
Part 17: Sectional specification: Fixed metallized polypropylene film dielectric AC and
pulse capacitors
Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and
non-solid electrolyte
Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric
chip DC capacitors
Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric chip
DC capacitors
Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 1
Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 2
Part 23: Sectional specification – Fixed surface mount metallized polyethylene naphthalate
film dielectric DC capacitors (this publication)

---------------------- Page: 8 ----------------------

60384-23 ¤ IEC:2006 – 9 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 9 ----------------------

60384-23 ¤ IEC:2006 – 11 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 23: Sectional specification –
Fixed surface mount metallized polyethylene naphthalate film
dielectric DC capacitors
1 General
1.1 Scope
This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with
metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment.
These capacitors have metallized connecting pads or soldering strips and are intended to be
mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors
may have "self-healing properties" depending on conditions of use. They are primarily
intended for applications where the AC component is small with respect to the rated voltage.
Capacitors for radio interference suppression are not included, but are covered by
IEC 60384-14.
1.2 Object
The object of this standard is to prescribe preferred ratings and characteristics and to select
from IEC 60384-1 (1999), the appropriate quality assessment procedures, tests and measur-
ing methods and to give general performance requirements for this type of capacitor. Test
severities and requirements prescribed in detail specifications referring to this sectional
specification shall be of equal or higher performance level, lower performance levels are not
permitted.
1.3 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60062: Marking codes for resistors and capacitors
IEC 60063:1963, Preferred number series for resistors and capacitors
Amendment 1 (1967)
Amendment 2 (1977)
1
IEC 60068-1, Environmental testing –Part 1: General and guidance
IEC 60384-1:1999, Fixed capacitors for use in electronic equipment – Part 1: Generic
specification
IEC 60410: Sampling plans and procedures for inspection by attributes
ISO 3:1973, Preferred numbers – Series of preferred numbers
___________
1
 For the tests in the IEC 60068 series of publication, the editions referenced in the applicable test clauses of the
generic specification shall be used.

---------------------- Page: 10 ----------------------

60384-23 ¤ IEC:2006 – 13 –
1.4 Information to be given in a detail specification
Detail specifications shall be derived from the relevant blank detail specification.
Detail specifications shall not specify requirements inferior to those of the generic, sectional
or blank detail specification. When more severe requirements are included, they shall be
listed in 1.9 of the detail specification and indicated in the test schedules, for example by an
asterisk.
NOTE The information given in 1.4.1 may, for convenience, be presented in tabular form.
The following information shall be given in each detail specification and the values quoted
shall preferably be selected from those given in the appropriate clause of this sectional
specification.
1.4.1 Outline drawing and dimensions
There shall be an illustration of the capacitor as an aid to easy recognition and for comparison
of the capacitor with others. Dimensions and their associated tolerances, which affect
interchangeability and mounting, shall be given in the detail specification. All dimensions shall
preferably be stated in millimetres, however, when the original dimensions are given in inches,
the converted metric dimensions in millimetres shall be added.
Normally, the numerical values shall be given for the length, width and height of the body.
When necessary, for example when a number of items (sizes and capacitance/voltage ranges)
is covered by a detail specification, the dimensions and their associated tolerances shall be
placed in a table below the drawing.
When the configuration is other than described above, the detail specification shall state such
dimensional information as will adequately describe the capacitor.
1.4.2 Mounting
The detail specification shall give guidance on methods of mounting for normal use. Mounting
for test and measurement purposes (when required) shall be in accordance with 4.1.
1.4.3 Ratings and characteristics
The ratings and characteristics shall be in accordance with the relevant clauses of this
specification, together with the following:
1.4.3.1 Rated capacitance range
See 2.2.1.
NOTE When products approved to the detail specification have different ranges, the following statement should
be added: "The range of capacitance values available in each voltage range is given in IEC QC 001005."
1.4.3.2 Particular characteristics
Additional characteristics may be listed, when they are considered necessary to specify
adequately the component for design and application purposes.

---------------------- Page: 11 ----------------------

60384-23 ¤ IEC:2006 – 15 –
1.4.3.3 Soldering
The detail specification shall prescribe the test methods, severities and requirements
applicable for the solderability and the resistance to soldering heat tests.
1.4.4 Marking
The detail specification shall specify the content of the marking on the capacitor and on the
package. Deviations from 1.6 shall be specifically stated.
1.5 Terms and definitions
For the purposes of this document the definitions of IEC 60384-1 and the following definitions
apply:
1.5.1
surface mount capacitor
capacitor whose small dimensions and nature or shape of terminations make it suitable for
surface mounting in hybrid circuits and on printed boards
1.5.2
performance grade 1 capacitors (long-life)
capacitors for long-life applications with stringent requirements for the electrical parameters
1.5.3
performance grade 2 capacitors (general purpose)
capacitors for general application where the stringent requirements for grade 1 capacitors are
not necessary
1.5.4
performance grade 3 capacitors (low temperature, miniature type)
miniature type capacitors having a rated temperature of 85 °C and for which less stringent
requirements than for grade 2 capacitors are acceptable
1.5.5
rated voltage
U
R
maximum DC voltage which may be applied continuously to a capacitor at the rated
temperature
NOTE The sum of the DC voltage and the peak AC voltage applied to the capacitor must not exceed the rated
voltage. The value of the peak AC voltage must not exceed the following percentages of the rated voltage at the
frequencies stated:
50 Hz: 20 %
100 Hz: 15 %
1 000 Hz: 3 %
10 000 Hz: 1 %
unless otherwise specified in the detail specification.
1.6 Marking
See 2.4 of IEC 60384-1, with the following details:
1.6.1 The information given in the marking is normally selected from the following list; the
relative importance of each item is indicated by its position in the list:
a) rated capacitance (in clear or code according to IEC 60062);

---------------------- Page: 12 ----------------------

60384-23 ¤ IEC:2006 – 17 –
b) rated voltage (DC voltage may be indicated by the symbol     or    );
c) tolerance on rated capacitance;
d) category voltage;
e) year and month (or week) of manufacture;
f) manufacturer's name or trade mark;
g) climatic category;
h) manufacturer's type designation;
i) reference to the detail specification.
1.6.2 Because of their small size, it is generally not practicable to apply as many markings to
surface mount capacitors as is normal practice with larger components. Any markings that are
applied shall be clearly legible and shall be selected from the items in 1.6.1.
NOTE The markings should include items a), f) and h) from the items in 1.6.1. Any duplication of information in
the marking on the capacitor should be avoided.
1.6.3 The package containing the capacitor(s) shall be clearly marked with all the information
listed in 1.6.1.
1.6.4 Any additional marking shall be so applied that no confusion can arise.
2 Preferred ratings and characteristics
2.1 Preferred characteristics
The values given in detail specifications shall preferably be selected from the following:
2.1.1 Preferred climatic categories
The surface mount capacitors covered by this specification are classified into climatic
categories according to the general rules given in IEC 60068-1.
The lower and upper category temperature and the duration of the damp heat, steady state
test shall be chosen from the following:
Lower category temperature: -55 °C, -40 °C and -25 °C.
Upper category temperature: +85 °C (only grade 3); +100 °C, +125 °C and +155 °C.
Duration of the damp heat, steady state test: 4, 10, 21 and 56 days.
NOTE With continuous operation at 125 °C in excess of the endurance test time, accelerated ageing should be
considered (see detail specification).
The severities for the cold and dry heat tests are the lower and upper category temperatures
respectively.

---------------------- Page: 13 ----------------------

60384-23 ¤ IEC:2006 – 19 –
2.2 Preferred values of ratings
2.2.1 Rated capacitance (C )
R
Preferred values of rated capacitance are:
1 – 1,5 – 2,2 – 3,3 – 4,7 and 6,8 and their decimal multiples.
These values conform to the E6 series of preferred values given in IEC 60063.
If other values are required they shall preferably be chosen from the E12 series.
2.2.2 Tolerance on rated capacitance
The preferred tolerances on the rated capacitance are ±5 %, ±10 % and ±20 %.
2.2.3 Rated voltage (U )
R
The preferred values of rated voltage are: 10 V, 16 V, 25 V, 40 V, 50 V, 63 V, 100 V, 160 V,
250 V, 400 V and 630 V. These values conform to the basic series of preferred values R5
given in ISO 3.
2.2.4 Category voltage (U )
C
Grade 1 and Grade 2 capacitors:
0,8 U for upper category temperature 125 °C and
R
0,5 U for upper category temperature 155 °C.
R
Grade 3 capacitors:
0,8 U for upper category temperature 100 °C and
R
0,5 U for upper category temperature 125 °C.
R
2.2.5 Rated temperature
Grade 1 and Grade 2 capacitors:
the standard value of rated temperature is 100 °C
Grade 3 capacitors:
the standard value of rated temperature is 85 °C.
3 Quality assessment procedures
3.1 Primary stage of manufacture
The primary stage of manufacture is the winding of the capacitor element or the equivalent
operation.
3.2 Structurally similar components
Capacitors considered as being structurally similar are capacitors produced with similar
processes and materials, though they may be of different case sizes and capacitance and
voltage values.

---------------------- Page: 14 ----------------------

60384-23 ¤ IEC:2006 – 21 –
3.3 Certified records of released lots
The information required in 3.5.1 of IEC 60384-1 shall be made available when prescribed in
the detail specification and when requested by a purchaser. After the endurance test the
parameters for which variables information is required are the capacitance, tan δ and the
insulation resistance.
3.4 Qualification approval
The procedures for qualification approval testing are given in 3.5 of IEC 60384-1.
The sc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.