Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

IEC 60384-23:2023 is available as IEC 60384-23:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60384-23:2023 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics, selects from IEC 60384‑1:2021 the appropriate quality assessment procedures, tests and measuring methods and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level. Lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384‑14. This edition includes the following significant technical changes with respect to the previous edition: - this edition includes the following significant technical changes with respect to the previous edition: revision of all parts of the document based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents; - the document structure has been organized to follow new sectional specification structure decided in TC 40; - revised tables and Clause 5 so as to prevent duplications and contradictions; - in Subclause 5.2 (Mounting), the Subclauses 5.2.1, 5.2.2 and 5.2.3 have been added; - in Subclause 5.5 (Shear test), the Subclauses 5.5.1 and 5.5.2 have been added; - in Subclause 5.14 (Component solvent resistance), the Subclauses 5.14.1 and 5.14.2 have been added. In Table 8 and Table A.2, test 5.14 has been moved before 5.7.5 (Final inspections and requirements) in Group 1A and in Subgroup C1; - in Subclause 5.15 (Solvent resistance of marking), the Subclauses 5.15.1 and 5.15.2 have been added; - tangent of loss angle measurement has been added to the resistance to soldering heat test; - lot-by-lot and periodical inspection tables including requirements have been moved to Annex A; - revised Inspection Level (IL) of A1 subgroup.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 23: Rahmenspezifikation - Oberflächenmontierbare Festkondensatoren für Gleichspannung mit metallisierter Polyethylen-Naphthalat-Folie als Dielektrikum

Condensateurs fixes utilisés dans les équipements électroniques - Partie 23: Spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polynaphtalate d’éthylène métallisé

IEC 60384-23:2023 est disponible sous forme de IEC 60384-23:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 60384-20:2023 s’applique aux condensateurs fixes pour courant continu à électrodes métallisées et à diélectrique en polynaphtalate d’éthylène destinés aux équipements électroniques. Ces condensateurs sont équipés de contacts de connexion métallisés ou de bandes de brasure et sont destinés à être montés directement sur des cartes imprimées ou des substrats pour circuits hybrides. Ces condensateurs peuvent avoir des propriétés "autocicatrisantes" en fonction des conditions d’utilisation. Ils sont principalement destinés à des pplications dans lesquelles la composante alternative est faible par rapport à la tension assignée. La présente partie de l’IEC 60384 spécifie les valeurs assignées et caractéristiques préférentielles, sélectionne, en se référant à l’IEC 60384‑1:2021, les procédures d’assurance de la qualité appropriées, les essais et les méthodes de mesure, et donne les exigences de performances générales pour ce type de condensateur. Les sévérités et les exigences des essais spécifiées dans les spécifications particulières se référant à la présente spécification intermédiaire ont un niveau de performance supérieur ou égal. Les niveaux de performance inférieurs ne sont pas autorisés. Les condensateurs d’antiparasitage ne sont pas inclus, mais ils sont couverts par l’IEC 60384‑14. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - révision de toutes les parties du document en s’appuyant sur les Directives ISO/IEC, Partie 2:2021, et harmonisation avec d’autres types de documents similaires; - la structure du document a été organisée pour suivre la nouvelle structure de spécification intermédiaire décidée au sein du CE 40; - révision des tableaux et de l’Article 5 pour éviter les duplications et les contradictions; - dans le paragraphe 5.2 (Montage), les paragraphes 5.2.1, 5.2.2 et 5.2.3 ont été ajoutés; - dans le paragraphe 5.5 (Essai de cisaillement), les paragraphes 5.5.1 et 5.5.2 ont été ajoutés; - dans le paragraphe 5.14 (Résistance du composant aux solvants), les paragraphes 5.14.1 et 5.14.2 ont été ajoutés; dans le Tableau 8 et le Tableau A.2, l’essai 5.14 a été déplacé avant 5.7.5 (Contrôles finaux et exigences) dans le Groupe 1A et dans le Sous-groupe C1; - dans le paragraphe 5.15 (Résistance au solvant du marquage), les paragraphes 5.15.1 et 5.15.2 ont été ajoutés; - ajout du mesurage de la tangente de l’angle de perte à l’essai de résistance à la chaleur du brasage; - les tableaux de contrôle lot par lot et périodique qui comprennent des exigences ont été déplacés à l’Annexe A; - révision du Niveau de contrôle (IL) du Sous-groupe A1.

Nespremenljivi kondenzatorji za elektronsko opremo - 23. del: Področna specifikacija - Nespremenljivi kondenzatorji za enosmerni tok za površinsko montažo z dielektrikom iz metaliziranega polietilen-naftalatnega filma (IEC 60384-23:2023)

Ta del standarda IEC 60384 se uporablja za pritrjene kondenzatorje za površinsko namestitev za enosmerne napetosti z metaliziranimi elektrodami in polietilenskim naftalatnim dielektrikom za uporabo v elektronski opremi.
Ti kondenzatorji imajo pokovinjene priključne obloge ali varilne trakove in so namenjeni montaži neposredno na tiskana vezja ali na podlage za hibridne tokokroge. Ti kondenzatorji imajo lahko »samoobnovljive lastnosti«, odvisno od pogojev uporabe. Namenjeni so predvsem vrstam uporabe, pri katerih je izmenična komponenta majhna glede na nazivno napetost.
Ta del standarda IEC 60384 določa prednostne vrednosti in lastnosti, ponuja izbiro primernih postopkov za ovrednotenje kakovosti, preskusov in merilnih metod iz standarda IEC 60384 1:2021 ter podaja splošne zahteve glede zmogljivosti za to vrsto kondenzatorja. Preskusne stopnje in zahteve, določene v podrobnih specifikacijah, ki se navezujejo na to področno specifikacijo, so na enaki ali višji ravni zmogljivosti. Nižje ravni zmogljivosti niso dovoljene.
Kondenzatorji za preprečevanje elektromagnetnih motenj niso vključeni, vendar so zajeti v standardu IEC 60384 14.

General Information

Status
Published
Publication Date
16-Mar-2023
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
17-Mar-2023
Completion Date
17-Mar-2023

Relations

Buy Standard

Standard
EN IEC 60384-23:2023
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 60384-23:2022
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60384-23:2023
01-maj-2023
Nespremenljivi kondenzatorji za elektronsko opremo - 23. del: Področna
specifikacija - Nespremenljivi kondenzatorji za enosmerni tok za površinsko
montažo z dielektrikom iz metaliziranega polietilen-naftalatnega filma (IEC 60384-
23:2023)
Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed
metallized polyethylene naphthalate film dielectric surface mount DC capacitors (IEC
60384-23:2023)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 23:
Rahmenspezifikation - Oberflächenmontierbare Festkondensatoren für Gleichspannung
mit metallisierter Polyethylen-Naphthalat-Folie als Dielektrikum (IEC 60384-23:2023)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 23:
Spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant
continu à diélectrique en film de polynaphtalate d’éthylène métallisé (IEC 60384-
23:2023)
Ta slovenski standard je istoveten z: EN IEC 60384-23:2023
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
SIST EN IEC 60384-23:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60384-23:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 60384-23:2023


EUROPEAN STANDARD EN IEC 60384-23

NORME EUROPÉENNE

EUROPÄISCHE NORM March 2023
ICS 31.060.10 Supersedes EN 60384-23:2015
English Version
Fixed capacitors for use in electronic equipment - Part 23:
Sectional specification - Fixed metallized polyethylene
naphthalate film dielectric surface mount DC capacitors
(IEC 60384-23:2023)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 23: Spécification intermédiaire - Elektronik - Teil 23: Rahmenspezifikation -
Condensateurs fixes pour montage en surface pour courant Oberflächenmontierbare Festkondensatoren für
continu à diélectrique en film de polynaphtalate d'éthylène Gleichspannung mit metallisierter Polyethylen-Naphthalat-
métallisé Folie als Dielektrikum
(IEC 60384-23:2023) (IEC 60384-23:2023)
This European Standard was approved by CENELEC on 2023-03-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60384-23:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60384-23:2023
EN IEC 60384-23:2023 (E)
European foreword
The text of document 40/2983/FDIS, future edition 3 of IEC 60384-23, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60384-23:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-12-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-03-10
document have to be withdrawn
This document supersedes EN 60384-23:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the
...

SLOVENSKI STANDARD
oSIST prEN IEC 60384-23:2022
01-maj-2022
Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 23. del: Področna
specifikacija - Nespremenljivi kondenzatorji za enosmerni tok za površinsko
montažo z dielektrikom iz metaliziranega polietilen-naftalatnega filma
Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed
metallized polyethylene naphthalate film dielectric surface mount DC capacitors
Ta slovenski standard je istoveten z: prEN IEC 60384-23:2022
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
oSIST prEN IEC 60384-23:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60384-23:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60384-23:2022

40/2923/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60384-23 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-03-11 2022-06-03
SUPERSEDES DOCUMENTS:
40/2841/CD, 40/2879/CC

IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.

TITLE:
Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized
polyethylene naphthalate film dielectric surface mount DC capacitors

PROPOSED STABILITY DATE: 2030

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60384-23:2022
IEC 60384-23/Ed3/CDV :20XX  IEC (E) – 2 –        40/2923/CDV
1 CONTENTS
2 FOREWORD . 5
3 1 Scope . 7
4 2 Normative references . 7
5 3 Terms and definition . 8
6 4 Preferred ratings and characteristics . 8
7 4.1 Preferred climatic categories . 8
8 4.2 Preferred values of ratings . 8
9 4.2.1 Nominal capacitance (C ) . 8
N
10 4.2.2 Tolerance on nominal capacitance . 9
11 4.2.3 Rated voltage (U ) . 9
R
12 4.2.4 Category voltage (U ) . 9
C
13 4.2.5 Rated temperature . 9
14 5 Test and measurement procedures . 10
15 5.1 General . 10
16 5.2 Mounting . 10
17 5.2.1 Initial inspections . 10
18 5.2.2 Mounting method .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.