Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings

This Part of prEN 1555 specifies the characteristics of fusion fittings made from polyethylene(PE) as well as of mechanical fittings made from PE and other materials for piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in the present standard. In conjunction with the other Parts of prEN 1555, it is applicable to PE fittings, their joints and to joints with components of PE and other materials intended to be used under the following conditions:- a maximum operating pressure, MOP, up to and including 10 bar; - an operating temperature of 20°C as ref.

Kunststoff-Rohrleitungssysteme für die Gasversorgung - Polyethylen (PE) - Teil 3: Formstücke

Systemes de canalisations en plastique pour la distribution de combustibles gazeux - Polyethylene (PE) - Partie 3: Raccords

Cevni sistemi iz polimernih materialov za oskrbo s plinastimi gorivi - Polietilen (PE) - 3. del: Fitingi

General Information

Status
Withdrawn
Publication Date
30-Jun-2005
Withdrawal Date
07-Nov-2010
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Oct-2010
Due Date
12-Nov-2010
Completion Date
08-Nov-2010

Relations

Buy Standard

Amendment
EN 1555-3:2003/A1:2005
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1555-3:2003/A1:2005
01-julij-2005
Cevni sistemi iz polimernih materialov za oskrbo s plinastimi gorivi - Polietilen
(PE) - 3. del: Fitingi
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3:
Fittings
Kunststoff-Rohrleitungssysteme für die Gasversorgung - Polyethylen (PE) - Teil 3:
Formstücke
Systemes de canalisations en plastique pour la distribution de combustibles gazeux -
Polyethylene (PE) - Partie 3: Raccords
Ta slovenski standard je istoveten z: EN 1555-3:2002/A1:2005
ICS:
83.140.30 Cevi, fitingi in ventili iz Plastics pipes, fittings and
polimernih materialov valves
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
SIST EN 1555-3:2003/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1555-3:2003/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 1555-3:2003/A1:2005
EUROPEAN STANDARD
EN 1555-3:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2005
ICS 23.040.45; 91.140.40
English version
Plastics piping systems for the supply of gaseous fuels -
Polyethylene (PE) - Part 3: Fittings
Systèmes de canalisations en plastique pour la distribution Kunststoff-Rohrleitungssysteme für die Gasversorgung -
de combustibles gazeux - Polyethylène (PE) - Partie 3: Polyethylen (PE) - Teil 3: Formstücke
Raccords
This amendment A1 modifies the European Standard EN 1555-3:2002; it was approved by CEN on 3 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyp
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.