oSIST prEN 13832-3:2010
(Main)Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
This standard specifies requirements for all-rubber and all-polymeric footwear constructed to be highly resistant to specific chemicals.
This standard does not cover footwear made from leather.
Schuhe zum Schutz gegen Chemikalien - Teil 3: Anforderungen an Schuhe, die gegen Chemikalien unter Laborbedingungen hochwiderstandsfähig sind
Diese Norm legt Anforderungen fest für Vollgummischuhe oder Gesamtpolymerschuhe, die gegen Chemikalien hochwiderstandsfähig sind.
Diese Norm gilt nicht für Schuhe aus Leder.
Chaussure protégeant contre les produits chimiques - Partie 3: Exigences pour les chaussures hautement résistantes aux produits chimiques dans des conditions de laboratoire
Obutev za varovanje pred kemikalijami - 3. del: Zahteve za obutev, zelo odporno proti kemikalijam v laboratorijskih razmerah TC: Obutev za varovanje pred kemikalijami - 3. del: Zahteve za obutev, zelo odporno proti kemikalijam v laboratorijskih razmerah
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13832-3:2010
01-julij-2010
Obutev za varovanje pred kemikalijami - 3. del: Zahteve za obutev, zelo odporno
proti kemikalijam v laboratorijskih razmerah
Footwear protecting against chemicals - Part 3: Requirements for footwear highly
resistant to chemicals under laboratory conditions
Schuhe zum Schutz gegen Chemikalien - Teil 3: Anforderungen an Schuhe, die gegen
Chemikalien unter Laborbedingungen hochwiderstandsfähig sind
Chaussure protégeant contre les produits chimiques - Partie 3: Exigences pour les
chaussures hautement résistantes aux produits chimiques dans des conditions de
laboratoire
Ta slovenski standard je istoveten z: prEN 13832-3 rev
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
oSIST prEN 13832-3:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13832-3:2010
---------------------- Page: 2 ----------------------
oSIST prEN 13832-3:2010
EUROPEAN STANDARD
DRAFT
prEN 13832-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2010
ICS 13.340.50 Will supersede EN 13832-3:2006
English Version
Footwear protecting against chemicals - Part 3: Requirements
for footwear highly resistant to chemicals under laboratory
conditions
Chaussure protégeant contre les produits chimiques - Schuhe zum Schutz gegen Chemikalien - Teil 3:
Partie 3: Exigences pour les chaussures hautement Anforderungen an Schuhe, die gegen Chemikalien unter
résistantes aux produits chimiques dans des conditions de Laborbedingungen hochwiderstandsfähig sind
laboratoire
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 161.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13832-3:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13832-3:2010
prEN 13832-3:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Design .4
5 Classification .4
6 Requirements .5
7 Additional requirements for footwear highly resistant to chemicals . 10
8 Marking . 11
9 Instructions for use and related information . 12
Annex A (informative) Uncertainty of measurement . 14
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC Personal Protective Equipment . 15
Bibliography . 16
2
---------------------- Page: 4 ----------------------
oSIST prEN 13832-3:2010
prEN 13832-3:2010 (E)
Foreword
This document (prEN 13832-3:2010) has been prepared by Technical Committee CEN/TC 161 “Foot and leg
protectors”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13832-3:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
EN 13832, Footwear protecting against chemicals, is published in 3 parts
Part 1 : Terminology and test methods
Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
Part 3 : Requirements for footwear highly resistant to chemicals under laboratory conditions
This standard is intended for use in conjunction with EN ISO 20345, EN ISO 20346 and EN ISO 20347.
3
---------------------- Page: 5 ----------------------
oSIST prEN 13832-3:2010
prEN 13832-3:2010 (E)
1 Scope
This standard specifies requirements for all-rubber and all-polymeric footwear constructed to be highly
resistant to specific chemicals.
This standard does not cover footwear made from leather.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 13832-1:2006, Footwear protecting against chemicals - Part 1: Terminology and test methods
EN ISO 868, Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore
hardness) (ISO 868:2003)
EN ISO 20344:2004, Personal protective equipment - Test methods for footwear (ISO 20344:2004)
EN ISO 20345:2004, Personal protective equipment - Safety footwear (ISO 20345:2004)
EN ISO 20346:2004, Personal protective equipment - Protective footwear (ISO 20346:2004)
EN ISO 20347:2004, Personal protective equipment - Occupational footwear (ISO 20347:2004)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 13832-1:2006 and in EN ISO
20345:2004 apply.
4 Design
For footwear highly resistant to chemicals, only designs B, C, D or E in Figure 1 shall be used.
5 Classification
Footwear shall be classified in accordance with Table 1.
Table 1 — Classification of footwear
Code designation Classification
II All-rubber (i.e. entirely vulcanised) and all-polymeric footwear (i.e. entirely moulded) footwear
4
---------------------- Page: 6 ----------------------
oSIST prEN 13832-3:2010
prEN 13832-3:2010 (E)
AB C
1
D
E
Key
1 Variable extension that can be adapted to the wearer
A Low shoe C Half-knee boot E Thigh boot
B Ankle boot D knee-height boot
NOTE Design E is a knee-height boot (design D) equipped with a thin impermeable material that
extends the upper and that can be cut to adapt the boot to the wearer.
Figure 1 — Designs of footwear
6 Requirements
6.1 Basic requirements
Footwear constructed to be highly resistant to chemicals shall conform to the requirements specified in Table
2.
Footwear highly resistant to chemicals may or may not include a toe cap. The choice shall be made from one
of the three columns (EN ISO 20345, EN ISO 20346 or EN ISO 20347) in Table 2.
5
---------------------- Page: 7 ----------------------
oSIST prEN 13832-3:2010
prEN 13832-3:2010 (E)
Table 2 — Basic requirements for footwear highly resistant to chemicals
Reference Classification
EN ISO EN ISO EN ISO
Requirements
EN
20345: 20346: 20347: II
13832-3
2004 2004 2004
General Whole Types and classifications 4 and 5 X
footwear
Height of upper 5.2.1 5.2.1 5.2.1 X
5.2.2 5.2.2
Seat region Designs B, C ,D, E 5.2.2 X
Specific ergonomic features 5.3.4 5.3.4 5.3.3 X
Leakproofness 5.3.3 5.3.3 5.3.2 X
Whole Sole
Construction 5.3.1.1 5.3.1.1 5.3.1.1
footwear performance
Amd 1 Amd 1 Amd 1
Slip resistance 2007 2007 2007 X
table 2 table 2 table 2
Toe General 5.3.2.1 5.3.2.1 X
Protection
Toe cap length 5.3.2.2 5.3.2.2 X
Impact resistance 5.3.2.3 5.3.2.3 X
Compression resistance 5.3.2.4 5.3.2.4 X
Corrosion resistance of metal
5.3.2.5.1 5.3.2.5.1 X
toe caps
Non- metallic toe caps 5.3.2.5.2 5.3.2.5.2 X
Degradation 6.2.2 X
Chemicals
resistance
Permeation 6.2.3 X
Upper General 5.4.1 5.4.1 5.4.1 X
Thickness 5.4.2 5.4.2 5.4.2 X
Tensile properties 5.4.4 5.4.4 5.4.4 X
Flexing resistance 5.4.5 5.4.5 5.4.5 X
Insole/insocks See Table 3
Thickness 5.8.1 5.8.1 5.8.1 X
Abrasion resistance 6.3 X
Outsole
Flexing resistance 5.8.4 5.8.4 5.8.4 X
Interlayer bond strength 5.8.6 5.8.6 5.8.6 O
The applicability of a requirement to a particular classification is indicated in the table by the following.
X indicates that the requirement shall be met. In some cases the requirement relates only to particular materials
within the classification, e.g. pH value of leather components. This does not mean that other materials are
precluded from use.
O indicates that if the component part exists, the requirement shall be met.
NOTE The absence of X or O indicates that no requirement is made.
6
---------------------- Page: 8 ----------------------
oSIST prEN 13832-3:2010
prEN 13832-3:2010 (E)
Table 3 — Basic requirements for insoles and/or insocks
Requirements to fulfil in EN ISO 20345/20346/20347:2004
Component
Water
Options to be Chromium
Thickness pH ÅÅÅÅ absorption Abrasion Abrasion
assessed VI ÅÅÅÅ
5.7.1 5.7.2 desorption 5.7.4.1 5.7.4.2
5.7.5
5.7.3
No insole or if
present not Non-removable
1 Insock X X X X X
fulfilling the insock
requirements
No insock
2 Insole X X X X X
Seat sock present
Insock and
insole X X
Full insock,
3
together
non-removable
Insole Insock X X X
present
Full insock,
Insole X X X X X
4 removable and water-
permeable♦
Insock X X X
Full insock,
Insole X X X X X
5 removable, not water-
permeable
Insock X X X X
NOTE For removable insocks see 9.5.
X indicates that the requirement shall be met.
♦♦♦♦ indicates a water permeable insock which, when tested in accordance with EN ISO 20344: 2004, 7.2, lets water through
in 60 s or less.
Å indicates those requirements that are only for leather.
6.2 Whole footwear
6.2.1 Chemicals
Table 4 lists the chemicals to be used in applying this standard.
7
---------------------- Page: 9 ----------------------
oSIST prEN 13832-3:2010
prEN 13832-3:2010 (E)
Table 4 — List of chemicals
Letter code Chemical CAS-NR Class
1 B Acetone 78-93-3 Ketone
2 D Dichloromethane 75-09-2 Chlorinated hydrocarbon
3 F Toluene 108-88-3 Aromatic hydrocarbon
4 G Diethylamine 109-89-7 Amine
5 H Tetrahydrofurane 109-99-9 Heterocyclic ether
6 I Ethyl acetate 141-78-6 Ester
7 J n-Heptane 142-85-5 Saturated hydrocarbon
8 K Sodium hydroxide solution 30 % d = 1,33 1310-73-2 Alkali solution
9 L Sulfuric acid 95 % d = 1,84 7664-93-9 Inorganic acid
10 M Nitric acid (65 ± 3) % 7697-37-2 Inorganic acid
11 N 64-19-7 Organic acid
Acetic acid (99 ± 1) %
12 O Ammonia solution (25 ± 1) % 1336-21-6 Alkali solution
13
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.