SIST EN ISO 13427:2015

Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)

This International Standard specifies a test method used for the determination of the resistance of
geosynthetics to abrasion using a sliding block, whereby after abrasion the loss in tensile properties is
determined.
This test method is applicable to all geosynthetics used in the construction of railways.

Geokunststoffe - Simulation von Scheuerbeschädigungen (Gleitblockprüfung) (ISO 13427:2014)

Diese Norm legt ein Prüfverfahren zur Bestimmung der Widerstandsfähigkeit von Geotextilien gegen Scheuer-beanspruchung mit einem Gleitblock fest. Nach der Scheuerbeanspruchung wird der Verlust der Zugfestigkeitseigenschaften bestimmt. Das Verfahren ist auf Geogewebe und Geovliesstoffe sowie auf geotextilverwandte Produkte anwendbar. Diese Prüfung ist auf alle Geokunststoffe anwendbar, die beim Eisenbahnbau verwendet werden.

Géosynthétiques - Simulation de l'endommagement par abrasion (essai du bloc glissant) (ISO 13427:2014)

L'ISO 13427:2014 spécifie une méthode d'essai permettant de déterminer la résistance à l'abrasion des géosynthétiques à l'aide d'un bloc glissant. La perte des propriétés en traction est déterminée après abrasion. Cette méthode d'essai est applicable à tous les géosynthétiques utilisés dans la construction des voies ferrées.

Geotekstilije in geotekstilijam sorodni izdelki - Simuliranje poškodb z drgnjenjem (preskus z drsečim blokom) (ISO 13427:2014)

Ta mednarodni standard določa preskusne metode, ki se uporabljajo za določanje odpornosti geotekstilij na poškodbe z drgnjenjem z uporabo drsečega bloka in določanjem izgube nateznih lastnosti po drgnjenju.
Ta preskusna metoda se uporablja pri vseh geotekstilijah, ki se uporabljajo pri izgradnji železnic.

General Information

• Status: Published
• Publication Date: 28-Jan-2015
• ICS: 59.080.70 - Geotextiles
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Jan-2015
• Due Date: 26-Mar-2015
• Completion Date: 29-Jan-2015
• Directive: 89/106/EEC - Construction products
• Ref Project: EN ISO 13427:2014 - Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)

Relations

• Replaces: SIST EN ISO 13427:1999 - Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998)
• Effective Date: 01-Mar-2015
• Replaces: SIST EN ISO 13427:1999 - Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13427:2015
01-marec-2015
1DGRPHãþD
SIST EN ISO 13427:1999
*HRWHNVWLOLMHLQJHRWHNVWLOLMDPVRURGQLL]GHONL6LPXOLUDQMHSRãNRGE]GUJQMHQMHP
SUHVNXV]GUVHþLPEORNRP,62
Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)
Geokunststoffe - Simulation von Scheuerbeschädigungen (Gleitblockprüfung) (ISO
13427:2014)
Géosynthétiques - Simulation de l'endommagement par abrasion (essai du bloc glissant)
(ISO 13427:2014)
Ta slovenski standard je istoveten z: EN ISO 13427:2014
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 13427:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13427:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 13427:2015

EUROPEAN STANDARD
EN ISO 13427

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2014
ICS 59.080.70 Supersedes EN ISO 13427:1998
English Version
Geosynthetics - Abrasion damage simulation (sliding block test)
(ISO 13427:2014)
Géosynthétiques - Simulation de l'endommagement par Geokunststoffe - Simulation von Scheuerbeschädigungen
abrasion (essai du bloc glissant) (ISO 13427:2014) (Gleitblockprüfung) (ISO 13427:2014)
This European Standard was approved by CEN on 13 September 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13427:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13427:2015
EN ISO 13427:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 13427:2015
EN ISO 13427:2014 (E)
Foreword
This document (EN ISO 13427:2014) has been prepared by Technical Committee ISO/TC 221
"Geosynthetics" in collaboration with Technical Committee CEN/TC 189 “Geosynthetics” the secretariat of
which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at
the latest by June 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13427:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13427:2014 has been approved by CEN as EN ISO 13427:2014 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 13427:2015

---------------------- Page: 6 ----------------------

SIST EN ISO 13427:2015
INTERNATIONAL ISO
STANDARD 13427
Second edition
2014-12-15
Geosynthetics — Abrasion damage
simulation (sliding block test)
Géosynthétiques — Simulation de l’endommagement par abrasion
(essai du bloc glissant)
Reference number
ISO 13427:2014(E)
©
ISO 2014

---------------------- Page: 7 ----------------------

SIST EN ISO 13427:2015
ISO 13427:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 13427:2015
ISO 13427:2014(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
5.1 Abrasion tester . 1
6 Test specimens. 2
7 Conditioning . 2
8 Procedure. 2
9 Calculation and expression of results . 3
10 Test report . 3
© ISO 2014 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 13427:2015
ISO 13427:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particula
...