SIST EN 61753-051-3:2013
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single mode fibre plug style optical attenuator for category U - Uncontrolled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single mode fibre plug style optical attenuator for category U - Uncontrolled environment
This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre optic attenuator satisfies in order to be categorized as meeting the requirements of single-mode fibre, plug-style fixed attenuator devices used in uncontrolled environments. Optical performances specified in this standard relate to plug-style configurations optical attenuators only.
Lichtwellenleiter – Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 051-3: Lichtwellenleiter-Dämpfungsglieder mit Einmoden-Pigtail in Steckverbinderbauform für die Kategorie U - Unkontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 051-3: Affaiblisseur optique de type fiche pour fibres unimodales pour la catégorie U - Environnement non contrôlé
La CEI 61753-051-3:2013 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles un affaiblisseur pour fibres optiques satisfait pour entrer dans une catégorie satisfaisant aux exigences applicables aux affaiblisseurs fixes de type fiche, pour fibres unimodales utilisés dans des environnements non-contrôlés. Les performances optiques spécifiées dans la présente norme concernent uniquement les affaiblisseurs optiques ayant des configurations de type fiche. Cette deuxième édition annule et remplace la première édition parue en 2001 dont elle constitue une révision technique. Les modifications techniques spécifiques par rapport à l'édition précédente portent sur un ré-examen de la description des essais et des exigences associées et de la constitution de la norme. Mots clés: affaiblisseur pour fibres optiques, environnements non-contrôlés
Optični spojni elementi in pasivne komponente - Tehnični standard - 051-3. del: Vtični optični slabilni člen enorodnega vlakna za kategorijo U - Nenadzorovano okolje
Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati atenuator z optičnim vlaknom, da ustreza zahtevam za vtične nepomične atenuatorske naprave z enorodnim optičnim vlaknom, ki se uporabljajo v nadzorovanem okolju. V tem standardu navedene optične zmogljivosti veljajo samo za optične atenuatorje z vtičnimi konfiguracijami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61753-051-3:2013
01-oktober-2013
1DGRPHãþD
SIST EN 61753-051-3:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
9WLþQLRSWLþQLVODELOQLþOHQHQRURGQHJDYODNQD]DNDWHJRULMR81HQDG]RURYDQR
RNROMH
Fibre optic interconnecting devices and passive components - Performance standard -
Part 051-3: Single mode fibre plug style optical attenuator for category U - Uncontrolled
environment
Lichtwellenleiter – Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
051-3: Lichtwellenleiter-Dämpfungsglieder mit Einmoden-Pigtail in
Steckverbinderbauform für die Kategorie U - Unkontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 051-3: Affaiblisseur optique de type fiche pour fibres unimodales
pour la catégorie U - Environnement non contrôlé
Ta slovenski standard je istoveten z: EN 61753-051-3:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-051-3:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61753-051-3:2013
---------------------- Page: 2 ----------------------
SIST EN 61753-051-3:2013
EUROPEAN STANDARD
EN 61753-051-3
NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61753-051-3:2002
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 051-3: Single-mode fibre, plug style fixed attenuators for category U -
Uncontrolled environment
(IEC 61753-051-3:2013)
Dispositifs d'interconnexion et composants Lichtwellenleiter – Verbindungselemente
passifs à fibres optiques - und passive Bauteile – Betriebsverhalten -
Norme de performance - Teil 051-3: Lichtwellenleiter-
Partie 051-3: Affaiblisseurs fixes de type Dämpfungsglieder mit Einmoden-Pigtail in
fiche pour fibres unimodales Steckverbinderbauform
en catégorie U - für die Kategorie U -
Environnement non-contrôlé Unkontrollierte Umgebung
(CEI 61753-051-3:2013) (IEC 61753-051-3:2013)
This European Standard was approved by CENELEC on 2013-03-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-051-3:2013 E
---------------------- Page: 3 ----------------------
SIST EN 61753-051-3:2013
EN 61753-051-3:2013 - 2 -
Foreword
The text of document 86B/3543/FDIS, future edition 2 of IEC 61753-051-3, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-051-3:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-13
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-03-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61753-051-3:2002.
The specific technical changes from EN 61753-051-3:2002 are to reconsider test details and requirement
and the constitution of the standard.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61753-051-3:2013 was approved by CENELEC as a European
Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 61753-051-3:2013
- 3 - EN 61753-051-3:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-2 - Fibre optic interconnecting devices and EN 61300-2-2 -
passive components - Basic test and
measurement procedures -
Part 2-2: Tests - Mating durability
IEC 61300-2-6 - Fibre optic interconnecting devices and EN 61300-2-6 -
passive components - Basic test and
measurement procedures -
Part 2-6: Tests - Tensile strength of coupling
mechanism
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-12 - Fibre optic interconnecting devices and EN 61300-2-12 -
passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
---------------------- Page: 5 ----------------------
SIST EN 61753-051-3:2013
EN 61753-051-3:2013 - 4 -
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-26 - Fibre optic interconnecting devices and EN 61300-2-26 -
passive components - Basic test and
measurement procedures -
Part 2-26: Tests - Salt mist
IEC 61300-2-27 - Fibre optic interconnecting devices and EN 61300-2-27 -
passive components - Basic test and
measurement procedures -
Part 2-27: Tests - Dust - Laminar flow
IEC 61300-2-46 - Fibre optic interconnecting devices and EN 61300-2-46 -
passive components - Basic test and
measurement procedures -
Part 2-46: Tests - Damp heat cyclic
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
IEC 61754 Series Fibre optic connector interfaces EN 61754 Series
IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series
IEC/TR 62627-02 2010 Fibre optic interconnecting devices and - -
passive components -
Part 02: Report of round robin test results on
SC plug style fixed attenuators
---------------------- Page: 6 ----------------------
SIST EN 61753-051-3:2013
IEC 61753-051-3
®
Edition 2.0 2013-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 051-3: Single-mode fibre, plug style fixed attenuators for category U –
Uncontrolled environment
Dispositifs d’interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 051-3: Affaiblisseurs fixes de type fiche pour fibres unimodales en
catégorie U – Environnement non-contrôlé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX P
ICS 33.180.20 ISBN 978-2-83220-629-4
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61753-051-3:2013
– 2 – 61753-051-3 © IEC:2013
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report . 7
5 Performance requirements . 7
5.1 Sample size, sequencing and grouping. 7
5.2 Dimensions . 7
5.3 Test details and requirements . 7
Annex A (normative) Reference connector and adaptor . 14
Annex B (normative) Sample size and product sourcing requirements . 15
Table 1 – Test details and requirements (1 of 7) . 7
Table A.1 – Requirements for reference connector and adaptor . 14
Table B.1 − Sample size and product sourcing requirements . 15
---------------------- Page: 8 ----------------------
SIST EN 61753-051-3:2013
61753-051-3 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 051-3: Single-mode fibre, plug style fixed
attenuators for category U –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-051-3 has been prepared by subcommittee 86B. Fibre optic
interconnecting devices and passive components of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 2001 and constitutes a
technical revision. The specific technical changes from the previous edition are to reconsider
test details and requirement and the constitution of the standard.
---------------------- Page: 9 ----------------------
SIST EN 61753-051-3:2013
– 4 – 61753-051-3 © IEC:2013
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3543/FDIS 86B/3580/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard can be found on
the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN 61753-051-3:2013
61753-051-3 © IEC:2013 – 5 –
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 051-3: Single-mode fibre, plug style fixed
attenuators for category U –
Uncontrolled environment
1 Scope
This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which a fibre optic attenuator satisfies in order to be categorized as meeting the
requirements of single-mode fibre, plug-style fixed attenuator devices used in uncontrolled
environments. Optical performances specified in this standard relate to plug-style
configurations optical attenuators only.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
1
class B single-mode fibres
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-2, Fibre optic interconnecting
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.