SIST EN 14306:2010/kFprA1:2012
(Amendment)Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 170 °C to + 1 100 °C.
The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered.
This standard does not specify the required level or class of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.
Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 °C are not covered by this standard.
This standard does not cover products intended to be used for the insulation of the building structure.
This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Calciumsilikat (CS) - Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en silicate de calcium (CS) - Spécification
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Proizvodi iz kalcijevih silikatov (CS) - Specifikacija
General Information
Relations
Overview
SIST EN 14306:2010/kFprA1:2012 is a European Standard developed by CEN that specifies the requirements for factory-made calcium silicate (CS) thermal insulation products. These products are used primarily for the thermal insulation of building equipment and industrial installations operating within a broad temperature range from approximately -170 °C to +1100 °C. The standard covers CS products manufactured in various forms including boards, pipe sections, segments, and prefabricated ware.
This standard provides detailed specifications on product characteristics, testing procedures, conformity evaluation, marking, and labelling. It is a vital reference for manufacturers, designers, and engineers who deal with the selection and application of calcium silicate insulation products in technical building equipment and industrial contexts.
Key Topics
Product Scope and Forms
EN 14306 applies to factory-made calcium silicate products such as boards and pipe sections but excludes products intended for insulating building structures or applications with thermal conductivity above 0.6 W/(m·K) at 10 °C.Temperature Range
Calcium silicate insulation covered under this standard is suitable for extreme temperature ranges from cryogenic levels (around -170 °C) to very high temperatures (up to +1100 °C), making it versatile for multiple industrial uses.Testing and Evaluation
The standard outlines test methods for assessing physical properties like thermal conductivity, water absorption, and compressive strength (for load-bearing applications). It includes protocols for both initial type testing (ITT) and factory production control (FPC). Recent amendments emphasize the evaluation of water absorption in addition to other performance criteria.Conformity and Performance Declaration
Manufacturers are required to follow procedures for the attestation of conformity, including issuing declarations of performance in compliance with EU Construction Products Regulation (CPR) No. 305/2011, effective from July 2013.Marking and Labelling
Proper marking and labelling requirements ensure traceability and inform stakeholders of key product characteristics aligned with regulatory expectations.Exclusions
The standard explicitly excludes structural properties of composite systems incorporating calcium silicate, acoustical performance aspects such as airborne sound insulation and impact noise transmission indices, and insulation products for building structures.
Applications
Calcium silicate insulation products conforming to SIST EN 14306:2010/kFprA1:2012 are widely used in the following areas:
Thermal Insulation of Industrial Equipment
Insulation for pipes, vessels, tanks, and other industrial installations requiring high-temperature resistance and mechanical strength.Building Equipment Insulation
Used in heating, ventilation, and air conditioning (HVAC) systems within commercial and industrial buildings for efficient energy management.Prefabricated Thermal Insulation Systems
Integrated into composite panels or prefabricated insulation modules, enhancing installation speed and system performance, although this standard does not cover the structural behavior of such systems.Cryogenic Applications
Applied in installations where insulation at very low temperatures is essential, such as LNG processing and cryogenic storage.
By providing clear specifications and ensuring consistent quality, EN 14306 supports improved energy efficiency, safety, and durability of thermal insulation installations in critical sectors.
Related Standards
EN 13172 – Provides general principles for evaluation of conformity of thermal insulation products, including reaction to fire, thermal resistance, and mechanical properties.
Construction Products Regulation (EU) No 305/2011 – Governs the marketing and use of construction products within the EU, requiring declarations of performance for CE marking compliance.
Other CEN Standards for Thermal Insulation
Standards covering other materials such as mineral wool or foam insulation that complement calcium silicate products in building and industrial applications.Acoustical Standards
While EN 14306 excludes acoustical properties, other standards address sound insulation and noise transmission relevant to building installations.
By adhering to SIST EN 14306:2010/kFprA1:2012, stakeholders ensure their calcium silicate insulation products meet stringent European quality and safety requirements, facilitating reliable high-performance thermal management in building and industrial applications. This enhances sustainability, operational efficiency, and regulatory compliance throughout the lifecycle of insulated installations.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2012
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Proizvodi iz kalcijevih silikatov (CS) - Specifikacija
Thermal insulation products for building equipment and industrial installations - Factory
made calcium silicate (CS) products - Specification
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Calciumsilikat (CS) -
Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Produits manufacturés en silicate de calcium (CS) - Spécification
Ta slovenski standard je istoveten z: EN 14306:2009/FprA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 14306:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2012
ICS 91.100.60
English Version
Thermal insulation products for building equipment and industrial
installations - Factory made calcium silicate (CS) products -
Specification
Produits isolants thermiques pour l'équipement du bâtiment Wärmedämmstoffe für die technische Gebäudeausrüstung
et les installations industrielles - Produits manufacturés en
und für betriebstechnische Anlagen in der Industrie -
silicate de calcium (CS) - Spécification Werkmäßig hergestellte Produkte aus Calciumsilikat (CS) -
Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 88.
This draft amendment A1, if approved, will modify the European Standard EN 14306:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14306:2009/FprA1:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modification to 5.3.2, Thermal conductivity .4
2 Modifications to ZA.1, Scope and relevant characteristics .4
3 Modifications to ZA.2, Procedures for att
...
Frequently Asked Questions
SIST EN 14306:2010/kFprA1:2012 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification". This standard covers: This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 170 °C to + 1 100 °C. The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This standard does not specify the required level or class of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 °C are not covered by this standard. This standard does not cover products intended to be used for the insulation of the building structure. This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.
This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 170 °C to + 1 100 °C. The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This standard does not specify the required level or class of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 °C are not covered by this standard. This standard does not cover products intended to be used for the insulation of the building structure. This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.
SIST EN 14306:2010/kFprA1:2012 is classified under the following ICS (International Classification for Standards) categories: 91.100.60 - Thermal and sound insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14306:2010/kFprA1:2012 has the following relationships with other standards: It is inter standard links to SIST EN 14306:2010+A1:2013, SIST EN 14306:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14306:2010/kFprA1:2012 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/103. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 14306:2010/kFprA1:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...