Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)

This Standard specifies a method for the determination of the rubbing resistance of leather and synthetic materials using rubber.
The method is aimed to establish testing conditions that are similar to those of the practical use of footwear subjected to drastic stress, as is the case of hiking or children’s footwear, where the upper of one of the shoes is expected to rub with the sole of the other. This method is applicable to all types of leather and synthetic materials intended for shoe uppers.

Schuhe - Prüfverfahren für Oberteile - Prüfung der Reibfestigkeit mit einem Gummikissen (ISO 24265:2020)

Dieses Dokument legt ein Verfahren zur Bestimmung der Reibfestigkeit von Leder und synthetischen Materialien mit einem Gummi fest.
Das Verfahren zielt darauf ab, Prüfbedingungen zu schaffen, die denen ähneln, die in der Praxis bei Schuhen auftreten, die hohen Belastungen ausgesetzt sind, wie bei Wanderschuhen und Kinderschuhen, wo davon ausgegangen wird, dass das Obermaterial des einen Schuhs an der Sohle des anderen Schuhs reibt.
Dieses Verfahren gilt für alle Arten von Leder und synthetischen Materialien, die als Schuhobermaterialien dienen sollen.

Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'une bande en caoutchouc (ISO 24265:2020)

Le présent document spécifie une méthode pour la détermination de la résistance au frottement du cuir et des matériaux synthétiques à l'aide de caoutchouc.
Cette méthode a pour but d'établir des conditions d'essai similaires aux conditions d'utilisation pratique d'une chaussure soumise à une contrainte intense, comme c'est le cas des chaussures de randonnée ou des chaussures d'enfants, lorsque le frottement de la tige de l'une des chaussures avec la semelle de l'autre chaussure est prévisible.
Cette méthode s'applique à tous les types de cuir et de matériaux synthétiques destinés à la fabrication de tiges de chaussures.

Obutev - Metode za preskušanje zgornjih delov - Odpornost proti drgnjenju z gumijastim trakom (ISO 24265:2020)

General Information

Status
Published
Public Enquiry End Date
31-Jan-2020
Publication Date
08-Nov-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Nov-2020
Due Date
10-Jan-2021
Completion Date
09-Nov-2020

Buy Standard

Standard
EN ISO 24265:2021
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 24265:2020
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24265:2021
01-januar-2021
Obutev - Metode za preskušanje zgornjih delov - Odpornost proti drgnjenju z
gumijastim trakom (ISO 24265:2020)
Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO
24265:2020)
Schuhe - Prüfverfahren für Oberteile - Prüfung der Reibfestigkeit mit einem
Gummikissen (ISO 24265:2020)
Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'une
bande en caoutchouc (ISO 24265:2020)
Ta slovenski standard je istoveten z: EN ISO 24265:2020
ICS:
61.060 Obuvala Footwear
SIST EN ISO 24265:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 24265:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 24265:2021


EN ISO 24265
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2020
EUROPÄISCHE NORM
ICS 61.060
English Version

Footwear - Test methods for uppers - Resistance to
rubbing using a rubber strip (ISO 24265:2020)
Chaussures - Méthodes d'essai pour les tiges - Schuhe - Prüfverfahren für Oberteile - Prüfung der
Résistance au frottement à l'aide d'une bande en Reibfestigkeit mit einem Gummikissen (ISO
caoutchouc (ISO 24265:2020) 24265:2020)
This European Standard was approved by CEN on 14 September 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24265:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 24265:2021
EN ISO 24265:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 24265:2021
EN ISO 24265:2020 (E)
European foreword
This document (EN ISO 24265:2020) has been prepared by Technical Committee ISO/TC 216
"Footwear" in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24265:2020 has been approved by CEN as EN ISO 24265:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 24265:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 24265:2021
INTERNATIONAL ISO
STANDARD 24265
First edition
2020-10
Footwear — Test methods for uppers
— Resistance to rubbing using a
rubber strip
Chaussures — Méthodes d'essai pour les tiges — Résistance au
frottement à l'aide d'une bande en caoutchouc
Reference number
ISO 24265:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 24265:2021
ISO 24265:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 24265:2021
ISO 24265:2020(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Preparation of test pieces . 4
6.1 Dry rubbing resistance . 4
6.2 Wet rubbing resistance . 4
7 Procedure. 4
7.1 Dry rubbing resistance . 4
7.2 Wet rubbing resistance . 5
8 Expression of results . 5
9 Test report . 5
Bibliography . 6
© ISO 2020 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 24265:2021
ISO 24265:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in ac
...

SLOVENSKI STANDARD
oSIST prEN ISO 24265:2020
01-februar-2020
Obutev - Metode za preskušanje odpornosti zgornjih delov proti drgnjenju z
gumijastimi blazinicami (ISO/DIS 24265:2019)
Footwear - Test methods for uppers-fastness to rubbing using a rubber pad (ISO/DIS
24265:2019)
Schuhe - Prüfverfahren für Oberteile - Prüfung der Reibfestigkeit mit einem
Gummikissen (ISO/DIS 24265:2019)
Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'un
patin en caoutchouc (ISO/DIS 24265:2019)
Ta slovenski standard je istoveten z: prEN ISO 24265
ICS:
61.060 Obuvala Footwear
oSIST prEN ISO 24265:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 24265:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 24265:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 24265
ISO/TC 216 Secretariat: UNE
Voting begins on: Voting terminates on:
2019-10-21 2020-01-13
Footwear — Test methods for uppers — Fastness to
rubbing using a rubber pad
ICS: 61.060
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 24265:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 24265:2020
ISO/DIS 24265:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 24265:2020
ISO/DIS 24265:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
5 Preparation of test pieces . 4
5.1 Dry rubbing resistance . 4
5.2 Wet rubbing resistance . 4
6 Procedure. 4
6.1 Dry rubbing resistance . 4
6.2 Wet rubbing resistance . 4
7 Expression of results . 5
8 Test report . 5
© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 24265:2020
ISO/DIS 24265:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 216, Footwear.
iv © ISO 2019 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 24265:2020
DRAFT INTERNATIONAL STANDA
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.