SIST EN 12828:2013/kFprA1:2013

Heating systems in buildings - Design for water-based heating systems

This European Standard specifies design criteria for water based heating systems in buildings with a maximum operating temperature of up to 105 °C. In case of heating systems with maximum operating temperatures over 105 °C other safety aspects than those described in 4.6 may apply. The other clauses of this European Standard are still valid for those systems.
This European Standard does not amend product standards or product installation requirements. This standard covers the design of:
   heat supply systems;
   heat distribution systems;
   heat emission systems;
   control systems.
This European Standard takes into account heating requirements of attached systems (e.g. domestic hot water, process heat, air conditioning, ventilation) in the design of a heat supply, but does not cover the design of these systems.
This European Standard does not cover requirements for installation or commissioning or instructions for operation, maintenance and use of water based heating systems.
This European Standard does not cover the design of fuel and energy supply systems.

Heizungsanlagen in Gebäuden - Planung von Warmwasser-Heizungsanlagen

Systèmes de chauffage dans les bâtiments - Conception des systèmes de chauffage à eau

Ogrevalni sistemi v stavbah - Projektiranje toplovodnih ogrevalnih sistemov

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Oct-2013
• ICS: 91.140.10 - Central heating systems
• Technical Committee: OGS - Heating for buildings
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 18-May-2017
• Due Date: 23-May-2017
• Completion Date: 18-May-2017
• Ref Project: EN 12828:2012/FprA1 - Heating systems in buildings - Design for water-based heating systems

Relations

• Consolidated By: SIST EN 12828:2013+A1:2014 - Heating systems in buildings - Design for water-based heating systems
• Effective Date: 18-Jan-2023
• Revised: SIST EN 12828:2013 - Heating systems in buildings - Design for water-based heating systems
• Effective Date: 24-Apr-2013
• Consolidated By: SIST EN 12828:2013+A1:2014 - Heating systems in buildings - Design for water-based heating systems
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 12828:2013+A1:2014 - Heating systems in buildings - Design for water-based heating systems
• Effective Date: 01-Jul-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12828:2013/kFprA1:2013
01-oktober-2013
Ogrevalni sistemi v stavbah - Projektiranje toplovodnih ogrevalnih sistemov
Heating systems in buildings - Design for water-based heating systems
Heizungsanlagen in Gebäuden - Planung von Warmwasser-Heizungsanlagen
Systèmes de chauffage dans les bâtiments - Conception des systèmes de chauffage à
eau
Ta slovenski standard je istoveten z: EN 12828:2012/FprA1
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
SIST EN 12828:2013/kFprA1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12828:2013/kFprA1:2013

---------------------- Page: 2 ----------------------

SIST EN 12828:2013/kFprA1:2013


EUROPEAN STANDARD
FINAL DRAFT
EN 12828:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
July 2013
ICS 91.140.10
English Version
Heating systems in buildings - Design for water-based heating
systems
Systèmes de chauffage dans les bâtiments - Conception Heizungsanlagen in Gebäuden - Planung von
des systèmes de chauffage à eau Warmwasser-Heizungsanlagen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 228.

This draft amendment A1, if approved, will modify the European Standard EN 12828:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notifica
...