SIST EN ISO 5436-2:2004

Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001)

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren; Normale - Teil 2: Software-Normale (ISO 5436-2:2001)

Diese Internationale Norm definiert Software-Normale (Etalons) vom Typ F und F1 für die Prüfung der Software von Messgeräten. Gleichzeitig definiert sie das Datenformat der Typ F1 Software-Normale zur Kalibrierung von Messgeräten zur Messung von Oberflächenstrukturen nach der Profilmethode nach ISO 3274.
ANMERKUNG 1   In dieser Norm wird die Benennung ?Software-Normale Typ F1" durch ?Software-Lehre" ersetzt.
ANMERKUNG 2   Früher wurde ?Normale" auch ?Einstellnormale" genannt.
ANMERKUNG 3    ISO 3274 bezieht sich nur auf Messgeräte mit unabhängigen Bezügen.

Spécification géométrique des produits (GPS) - Etat de surface: Méthode du profil; Etalons - Partie 2: Etalons logiciels (ISO 5436-2:2001)

Diese Internationale Norm legt die Eigenschaften von Normalen (Etalons) zur Kalibrierung von Messgeräten zur Messung von Oberflächenstrukturen nach der Profilmethode nach ISO 3274 fest. Dieser Teil von ISO 5436 beschäftigt sich mit Software-Normalen. Er definiert das Datenformat des Typs F1. ANMERKUNG 1: In dieser Norm wird die Benennung "Software-Normale Typ F1" durch "Software-Lehre" ersetzt. ANMERKUNG 2: Früher wurde "Normale" auch "Einstellnormale" gennant. ANMERKUNG 3: ISO 3274 bezieht sich nur auf Messgeräte mit unabhängigen Bezügen.

Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2004
• Withdrawal Date: 28-Aug-2013
• ICS: 17.040.30 - Measuring instruments
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 28-Aug-2013
• Due Date: 20-Sep-2013
• Completion Date: 29-Aug-2013
• Ref Project: EN ISO 5436-2:2001 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001)

Relations

• Replaced By: SIST EN ISO 5436-2:2013 - Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
• Effective Date: 01-Oct-2013
• Amended By: SIST EN ISO 5436-2:2004/oprA1:2010 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards - Amendment 1 (ISO 5436-2:2001/DAM 1:2010)
• Effective Date: 08-Jun-2022
• Corrected By: SIST EN ISO 5436-2:2004/AC:2008 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001/Cor 1:2006/Cor 2:2008)
• Effective Date: 08-Jun-2022
• Amended By: SIST EN ISO 5436-2:2004/oprA1:2010 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards - Amendment 1 (ISO 5436-2:2001/DAM 1:2010)
• Effective Date: 06-Feb-2010
• Corrected By: SIST EN ISO 5436-2:2004/AC:2008 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001/Cor 1:2006/Cor 2:2008)
• Effective Date: 28-Oct-2008
• Revised: SIST EN ISO 5436-2:2013 - Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
• Effective Date: 11-Jan-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5436-2:2004
01-maj-2004
Geometrical Product Specifications (GPS) - Surface texture: Profile method;
Measurement standards - Part 2: Software measurement standards (ISO 5436-
2:2001)
Geometrical Product Specifications (GPS) - Surface texture: Profile method;
Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001)
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit:
Tastschnittverfahren; Normale - Teil 2: Software-Normale (ISO 5436-2:2001)
Spécification géométrique des produits (GPS) - Etat de surface: Méthode du profil;
Etalons - Partie 2: Etalons logiciels (ISO 5436-2:2001)
Ta slovenski standard je istoveten z: EN ISO 5436-2:2001
ICS:
17.040.30 Merila Measuring instruments
SIST EN ISO 5436-2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5436-2:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 5436-2:2004
EUROPEAN STANDARD
EN ISO 5436-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 17.040.30
English version
Geometrical Product Specifications (GPS) - Surface texture:
Profile method; Measurement standards - Part 2: Software
measurement standards (ISO 5436-2:2001)
Spécification géométrique des produits (GPS) - Etat de Geometrische Produktspezifikation (GPS) -
surface: Méthode du profil; Etalons - Partie 2: Etalons Oberflächenbeschaffenheit: Tastschnittverfahren; Normale
logiciels (ISO 5436-2:2001) - Teil 2: Software-Normale (ISO 5436-2:2001)
This European Standard was approved by CEN on 15 December 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5436-2:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 5436-2:2004
EN ISO 5436-2:2001 (E)
Foreword
The text of the International Standard ISO 5436-2:2001 has been prepared by Technical Committee
ISO/TC 213 "Dimensional and geometrical product specifications and verification" in collaboration with
Technical Committee CEN/TC 290 "Dimensional and geometrical product specification and verification",
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2002, and conflicting national standards shall be
withdrawn at the latest by June 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and the United Kingdom.
NOTE FROM CMC: The foreword is susceptible to be amended on reception of the German language
version. The confirmed or amended foreword, and when appropriate, the normative annex ZA for the
references to international publications with their relevant European publications will be circulated with
the German version.
Endorsement notice
The text of the International Standard ISO 5436-2:2001 was approved by CEN as a European Standard
without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 5436-2:2004

INTERNATIONAL ISO
STANDARD 5436-2
First edition
2001-12-15


Geometrical Product Specifications
(GPS) — Surface texture: Profile method;
Measurement standards —
Part 2:
Software measurement standards
Spécification géométrique des produits (GPS) — État de surface: Méthode
du profil; Étalons —
Partie 2: Étalons logiciels




Reference number
ISO 5436-2:2001(E)
©
 ISO 2001

---------------------- Page: 5 ----------------------

SIST EN ISO 5436-2:2004
ISO 5436-2:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland

ii © ISO 2001 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 5436-2:2004
ISO 5436-2:2001(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Normative references.1
3 Terms and definitions .2
4 Type F software measurement standards.3
5 File format for type F1 reference data .3
6 Software measurement standard certificate.9
Annex A (informative) Example of file format .11
Annex B (informative) Relation to the GPS matrix model.14
Bibliography.15

© ISO 2001 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 5436-2:2004
ISO 5436-2:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 5436 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5436-2 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product
specifications and verification.
This first edition, together with ISO 5436-1, replaces ISO 5436:1985, which has been technically revised.
ISO 5436 consists of the following parts, under the general title Geometrical Product Specifications (GPS) —
Surface texture: Profile method; Measurement standards:
 Part 1: Material measures
 Part 2: Software measurement standards
Annexes A and B of this part of ISO 5436 are for information only.
iv © ISO 2001 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 5436-2:2004
ISO 5436-2:2001(E)
Introduction
This part of ISO 5436 is a geometrical product specification (GPS) standard and is to be regarded as a general
GPS standard (see ISO/TR 14638). It influences link 6 of the chain of standards on roughness, waviness and
primary profile.
For more detailed information on the relationship of this part of ISO 5436 to other standards and the GPS matrix
model, see annex B.
This part of ISO 5436, together with ISO 5436-1, introduces two new measurement standards: Type E, for
calibrating the profile co-ordinate system, and Type F, for calibrating software. This part of ISO 5436 is concerned
with software measurement standards.
© ISO 2001 – All rights reserved v

---------------------- Page: 9 ----------------------

SIST EN ISO 5436-2:2004

---------------------- Page: 10 ----------------------

SIST EN ISO 5436-2:2004
INTERNATIONAL STANDARD ISO 5436-2:2001(E)

Geometrical Product Specifications (GPS) — Surface texture:
Profile method; Measurement standards —
Part 2:
Software measurement standards
1 Scope
This part of ISO 5436 defines Type F1 and Type F2 software measurement standards (etalons) for verifying the
software of measuring instruments. It also defines the file format of Type F1 software measurement standards for
the calibration of instruments for the measurement of surface texture by the profile method as defined in ISO 3274.
NOTE 1 Throughout this part of ISO 5436, the term “softgauge” is used as a substitute for “software measurement standard
Type F1”.
NOTE 2 Formerly, “measurement standards” were referred to as “calibration specimens”.
NOTE 3 ISO 3274 only refers to instruments with independent reference datums.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 5436. For dated references, subsequent amendments to, or revisions of, any of these publications
do not apply. However, parties to agreements based on this part of ISO 5436 are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain
registers of currently valid International Standards.
ISO 3274:1996, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal
characteristics of contact (stylus) instruments
ISO 5436-1:2000, Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement
standards — Part 1: Material measures
ISO 11562:1996, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological
characteristics of phase correct filters
ISO 12085:1996, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters
)
1
ISO/TS 17450-2:— , Geometrical Product Specifications (GPS) — General concepts — Part 2: Basic tenets,
specifications, operators and uncertainties
Guide to the expression of uncertainty in measurement (GUM). BIPM, IEC, IFCC, ISO, IUPAC, IUPAP, OIML,
1st edition, 1995.

1) To be published.
© ISO 2001 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 5436-2:2004
ISO 5436-2:2001(E)
International vocabulary of fundamental and general terms in metrology (VIM). BIPM, IEC, IFCC, ISO, IUPAC,

IUPAP, OIML, 2nd edition, 1993.
3 Terms and definitions
For the purposes of this part of ISO 5436, the terms and definitions given in ISO 3274, ISO 5436-1, ISO 11562,
ISO 12085, VIM, and the following apply.
3.1
software measurement standard
reference data or reference software intended to reproduce the value of a measurand with known uncertainty in
order to verify the software used to calculate the measurand in a measuring instrument
3.2
ASCII string
array of ASCII characters terminating in
3.3
integer
2-byte representation of whole number
NOTE 1 Integers have a minimum value of − 32 768 and a maximum value of + 32 767.
NOTE 2 The less significant bytes are stored in memory addresses lower than those in which are stored the more significant
bytes.
3.4
unsigned integer
2-byte representation of a positive whole number
NOTE 1 Unsigned integers have a minimum value of 0 and a maximum value of 65 535.
NOTE 2 The less significant bytes are stored in memory addresses lower than those in which are stored the more significant
bytes.
3.5
long integer
4-byte representation of a whole number
NOTE 1 Long integers have a minimum value of − 2 147 483 648 and a maximum value of + 2 147 483 647.
NOTE 2 The less significant bytes are stored in memory addresses lower than those in which are stored the more significant
bytes.
3.6
single precision float
4-byte representation consisting of a sign bit, an 8-bit excess − 127 binary exponent and a 23-bit mantissa
representing numbers between 1,0 and 2,0
NOTE 1 Since the high-order bit of the mantissa is always 1, it is not stored in the number.
−38 +38
NOTE 2 Single precision float have an approximate range of ± 1,17 to ± 3,4e .
NOTE 3 The less significant bytes are stored in memory addresses lower than those in which are stored the more significant
bytes.
2 © ISO 2001 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 5436-2:2004
ISO 5436-2:2001(E)
3.7
double precision float
8-byte representation consisting of a sign bit, an 11-bit excess − 1023 binary exponent, and a 52-bit mantissa, plus
the implied high-order 1 bit
−308 +308
NOTE 1 Double precision float have an approximate range of ± 2,22e to ± 2,22e .
NOTE 2 The less significant bytes are stored in memory addresses lower than those in which are stored the more significant
bytes.
4 Type F software measurement standards
4.1 General
These measurement standards are designed to verify the measuring instrument’s software (i.e. filter algorithms,
parameter calculations etc.)
The measurement standards can contain a form component which it shall be possible to remove.
4.2 Type F1 — Reference data
These measurement standards are computer data files that depict a digital representation of a total surface or
profile in a suitable recording medium.
Type F1 measurement standards are used to test software by inputting them as data into the software under
test/calibration and comparing the results from the software under test with the certified results from the calibration
certificate of the softgauge.
NOTE The certified results for mathematically designed synthetic data can often be calculated directly without the need for
certification by Type F2 measurement standards.
4.3 Type F2 — Reference software
These measurement standards are reference software. Reference software consists of traceable computer
software against which software in a measuring instrument can be compared.
Type F2 measurement standards are used to test software by inputting a common data set into both the software
under test/calibration and the reference software and comparing the results from the software under test with the
certified results from the reference software.
NOTE Type F2 measurement standards can also be used to certify type F1 measurement standards.
Reference software values shall be traceable.
5 File format for type F1 reference data
5.1 General
The file extension of this file protocol is .smd. The file protocol for the softgauge is divided into four separate
sections or records. Each record is composed of lines of information and within each line there are various “fields”
in which the information is coded. The file format is in 7-bit ASCII character code. Each line is terminated by a
carriage return, (), and line feed, ().
© ISO 2001 – All rights reserved 3

---------------------- Page: 13 ----------------------

SIST EN ISO 5436-2:2004
ISO 5436-2:2001(E)
Each record is terminated by an end of record, (), with a carriage return, (), and line feed, (),
and the last record is also further terminated by an end of file, (). For each field the separator is at
least one space.
5.2 Record 1 — Header
The first record contains a fixed header that includes the following information:
 revision of the softgauge file format;
 file identifier;
 GPS feature type, number and name of the stored feature — axis information;
 number of data points in the profile;
 scaling of the data points;

...