SIST EN 12942:2024

Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking

This document specifies minimum requirements for powered Respiratory Protective Devices (RPD)
incorporating a tight-fitting respiratory interface. It does not cover devices designed for use in
circumstances where there is or might be an oxygen deficiency.
Escape RPD and filters for use against CO are not covered by this document.
Laboratory tests and practical performance tests are included for the assessment of compliance with the
requirements.

Atemschutzgeräte - Gebläsefiltergeräte mit Vollmaske, Halbmaske oder Viertelmaske - Anforderungen, Prüfung, Kennzeichnung

Dieses Dokument legt Mindestanforderungen für Atemschutzgeräte (ASG) mit Gebläse fest, die eine Vollmaske, Halbmaske oder Viertelmaske und Gas-, Partikel- oder Kombinationsfilter enthalten. Es gilt nicht für Geräte, die für die Verwendung bei möglichem Sauerstoff-Mangel (Sauerstoff-Konzentration weniger als 17 % Volumenanteil) vorgesehen sind.
Fluchtgeräte (Atemschutzgeräte zu Fluchtzwecken) werden von diesem Dokument nicht abgedeckt.
Laborprüfungen und praktische Leistungsprüfungen sind enthalten, um die Übereinstimmung mit den Anforderungen feststellen zu können.

Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec masques complets, demi-masques ou quarts de masques - Exigences, essais, marquage

Le présent document spécifie les caractéristiques minimales exigées des appareils à ventilation assistée avec masques complets, demi-masques ou quarts de masques et filtre(s) antigaz, à particules ou combiné(s), utilisés comme appareils de protection respiratoire (APR). Il ne s'applique pas aux appareils destinés à être utilisés dans des circonstances présentant ou susceptibles de présenter un défaut d'oxygène (concentration en oxygène inférieure, en fraction volumique, à 17 %).
Les APR pour l’évacuation ne sont pas couverts par le présent document.
Il comporte des essais de laboratoire et des essais pratiques de performance pour évaluer la conformité aux exigences.

Oprema za varovanje dihal - Zaščitna obrazna, polobrazna ali četrtinska maska s tlačno filtracijo zraka - Zahteve, preskušanje, označevanje

Dokument določa minimalne zahteve za opremo za varovanje dihal (RPD) s tesno prilegajočim se vmesnikom za dihanje. Ne zajema naprav, ki so zasnovane za uporabo v okoliščinah, kjer obstaja ali se lahko pojavi pomanjkanje kisika.
Ta dokument ne zajema opreme za varovanje dihal za izhod v sili in filtrov za zaščito pred ogljikovimi oksidi.
Vključeni so tudi laboratorijski in praktični preskusi učinkovitosti za ocenjevanje skladnosti z zahtevami.

General Information

• Status: Published
• Public Enquiry End Date: 19-Feb-2017
• Publication Date: 11-Feb-2024
• ICS: 13.340.30 - Respiratory protective devices
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Jan-2024
• Due Date: 30-Mar-2024
• Completion Date: 12-Feb-2024
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: EN 12942:2023 - Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking

Relations

• Replaces: SIST EN 12942:1999/A2:2009 - Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
• Effective Date: 01-Mar-2024
• Replaces: SIST EN 12942:1999/A1:2003 - Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
• Effective Date: 01-Mar-2024
• Replaces: SIST EN 12942:1999 - Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
• Effective Date: 01-Mar-2024

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12942:2024
01-marec-2024
Nadomešča:
SIST EN 12942:1999
SIST EN 12942:1999/A1:2003
SIST EN 12942:1999/A2:2009
Oprema za varovanje dihal - Zaščitna obrazna, polobrazna ali četrtinska maska s
tlačno filtracijo zraka - Zahteve, preskušanje, označevanje
Respiratory protective devices - Powered filtering devices incorporating full face masks,
half masks or quarter masks - Requirements, testing, marking
Atemschutzgeräte - Gebläsefiltergeräte mit Vollmaske, Halbmaske oder Viertelmaske -
Anforderungen, Prüfung, Kennzeichnung
Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec
masques complets, demi-masques ou quarts de masques - Exigences, essais,
marquage
Ta slovenski standard je istoveten z: EN 12942:2023
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
SIST EN 12942:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12942:2024

---------------------- Page: 2 ----------------------
SIST EN 12942:2024
EN 12942
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 13.340.30 Supersedes EN 12942:1998
English Version
Respiratory protective devices - Powered filtering devices
incorporating full face masks, half masks or quarter masks
- Requirements, testing, marking
Appareils de protection respiratoire - Appareils Atemschutzgeräte - Gebläsefiltergeräte mit Vollmaske,
filtrants à ventilation assistée avec masques complets, Halbmaske oder Viertelmaske - Anforderungen,
demi-masques ou quarts de masques - Exigences, Prüfung, Kennzeichnung
essais, marquage
This European Standard was approved by CEN on 9 August 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12942:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12942:2024
EN 12942:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions, description and symbols . 6
3.1 Terms and definitions . 6
3.2 Description . 7
3.3 Symbols . 7
4 Classification . 8
5 Requirements . 9
5.1 General . 9
5.2 Values and tolerances .
...