SIST EN ISO 10960:2018
(Main)Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
This document specifies a method of assessing the resistance of hoses to the deleterious effects of
atmospheric ozone under dynamic conditions. It is applicable to hoses with bore diameters up to and
including 25 mm.
Gummi- und Kunststoffschläuche - Beurteilung der Ozonbeständigkeit unter dynamischen Bedingungen (ISO 10960:2017)
Dieses Dokument legt ein Verfahren zur Beurteilung der Beständigkeit von Schläuchen gegen Beeinträchtigungen durch atmosphärisches Ozon unter dynamischen Bedingungen fest. Es ist anwendbar für Schläuche bis zu einschließlich 25 mm
Tuyaux en caoutchouc et en plastique - Évaluation de la résistance à l'ozone dans des conditions dynamiques (ISO 10960:2017)
ISO 10960:2017 spécifie une méthode pour l'évaluation de la résistance des tuyaux aux effets délétères de l'ozone atmosphérique, dans des conditions dynamiques. Il est applicable aux tuyaux ayant un diamètre intérieur inférieur ou égal à 25 mm.
Gumene in polimerne cevi - Ocena odpornosti proti ozonu pri dinamičnih pogojih (ISO 10960:2017)
Ta dokument določa metodo za ocenjevanje odpornosti cevi proti škodljivim vplivom
ozona v atmosferi pri dinamičnih pogojih. Uporablja se za cevi s premerom do
vključno 25 mm.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10960:2018
01-april-2018
1DGRPHãþD
SIST EN ISO 10960:2000
*XPHQHLQSROLPHUQHFHYL2FHQDRGSRUQRVWLSURWLR]RQXSULGLQDPLþQLKSRJRMLK
,62
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
(ISO 10960:2017)
Gummi- und Kunststoffschläuche - Beurteilung der Ozonbeständigkeit unter
dynamischen Bedingungen (ISO 10960:2017)
Tuyaux en caoutchouc et en plastique - Évaluation de la résistance à l'ozone dans des
conditions dynamiques (ISO 10960:2017)
Ta slovenski standard je istoveten z: EN ISO 10960:2018
ICS:
83.140.40 Gumene cevi Hoses
SIST EN ISO 10960:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10960:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 10960:2018
EN ISO 10960
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 10960:1996
English Version
Rubber and plastics hoses - Assessment of ozone
resistance under dynamic conditions (ISO 10960:2017)
Tuyaux en caoutchouc et en plastique - Évaluation de la Gummi- und Kunststoffschläuche - Gummi- und
résistance à l'ozone dans des conditions dynamiques Kunststoffschläuche - Beurteilung der
(ISO 10960:2017) Ozonbeständigkeit unter dynamischen Bedingungen
(ISO 10960:2017)
This European Standard was approved by CEN on 5 December 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10960:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10960:2018
EN ISO 10960:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10960:2018
EN ISO 10960:2018 (E)
European foreword
This document (EN ISO 10960:2018) has been prepared by Technical Committee ISO/TC 45 “Rubber
and plastics hoses and hose assemblies” in collaboration with Technical Committee CEN/TC 218
“Rubber and plastics hoses and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall
be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10960:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10960:2017 has been approved by CEN as EN ISO 10960:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10960:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 10960:2018
INTERNATIONAL ISO
STANDARD 10960
Second edition
2017-11
Rubber and plastics hoses —
Assessment of ozone resistance under
dynamic conditions
Tuyaux en caoutchouc et en plastique — Évaluation de la résistance à
l'ozone dans des conditions dynamiques
Reference number
ISO 10960:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 10960:2018
ISO 10960:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10960:2018
ISO 10960:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test pieces . 2
6.1 Type of test piece . 2
6.2 Number of test pieces . 2
7 Conditioning of test pieces . 2
8 Test conditions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.