SIST EN ISO 22553-10:2023
(Main)Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022)
Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022)
This document specifies a test method for the evaluation of protection against corrosion of edges and stamping burrs by electro-deposition coatings.
It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
Beschichtungsstoffe - Elektrotauchlacke - Teil 10: Kantenschutz (ISO 22553-10:2022)
Peintures et vernis - Peintures d'électrodéposition - Partie 10: Protection des arêtes (ISO 22553-10:2022)
Le présent document spécifie une méthode d'essai pour l’évaluation de la protection contre la corrosion des arêtes et des bavures d’emboutissage assurée par les peintures d’électrodéposition.
Il s'applique aux peintures d'électrodéposition destinées aux industries automobiles et autres applications industrielles générales, par exemple unités frigorifiques, biens de consommation, radiateurs, aérospatiale, agriculture.
Barve in laki - Elektrodepozicijski premazi - 10. del: Zaščita robov (ISO 22553-10:2022)
Ta dokument določa preskusno metodo za vrednotenje zaščite pred korozijo robov in kovanih zarobkov z elektrodepozicijskimi premazi.
Uporablja se za elektrodepozicijske premaze za avtomobilsko industrijo in drugo splošno industrijsko uporabo (npr. ohlajevalne enote, potrošniški izdelki, radiatorji, letalska in vesoljska industrija, kmetijstvo).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22553-10:2023
01-maj-2023
Barve in laki - Elektrodepozicijski premazi - 10. del: Zaščita robov (ISO 22553-
10:2022)
Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553
-10:2022)
Beschichtungsstoffe - Elektrotauchlacke - Teil 10: Kantenschutz (ISO 22553-10:2022)
Peintures et vernis - Peintures d'électrodéposition - Partie 10: Protection des arêtes (ISO
22553-10:2022)
Ta slovenski standard je istoveten z: EN ISO 22553-10:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 22553-10:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22553-10:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 22553-10:2023
EN ISO 22553-10
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2023
EUROPÄISCHE NORM
ICS 87.040
English Version
Paints and varnishes - Electro-deposition coatings - Part
10: Edge protection (ISO 22553-10:2022)
Peintures et vernis - Peintures d'électrodéposition - Beschichtungsstoffe - Elektrotauchlacke - Teil 10:
Partie 10: Protection des arêtes (ISO 22553-10:2022) Kantenschutz (ISO 22553-10:2022)
This European Standard was approved by CEN on 9 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22553-10:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22553-10:2023
EN ISO 22553-10:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22553-10:2023
EN ISO 22553-10:2023 (E)
European foreword
The text of ISO 22553-10:2022 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22553-10:2023 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2023, and conflicting national standards shall be
withdrawn at the latest by July 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 22553-10:2022 has been approved by CEN as EN ISO 22553-10:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22553-10:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 22553-10:2023
INTERNATIONAL ISO
STANDARD 22553-10
First edition
2022-02
Paints and varnishes — Electro-
deposition coatings —
Part 10:
Edge protection
Peintures et vernis — Peintures d'électrodéposition —
Partie 10: Protection des arêtes
Reference number
ISO 22553-10:2022(E)
© ISO 2022
---------------------- Page: 7 ----------------------
SIST EN ISO 22553-10:2023
ISO 22553-10:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 22553-10:2023
ISO 22553-10:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and test equipment . 2
6 Test panels .3
7 Number of determinations . 3
8 Procedure .4
8.1 Coating of the test panels . 4
8.2 Corrosion test . 4
9 Evaluation . 4
10 Marking of the test result .5
11 Precision . 5
12 Test report . 5
iii
© ISO 2022 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 22553-10:2023
ISO 22553-10:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the
...
SLOVENSKI STANDARD
oSIST prEN ISO 22553-10:2022
01-september-2022
Barve in laki - Elektrodepozicijski premazi - 10. del: Zaščita robov (ISO 22553-
10:2022)
Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553
-10:2022)
Beschichtungsstoffe - Elektrotauchlacke - Teil 10: Kantenschutz (ISO 22553-10:2022)
Peintures et vernis - Peintures d'électrodéposition - Partie 10: Protection des arêtes (ISO
22553-10:2022)
Ta slovenski standard je istoveten z: prEN ISO 22553-10
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 22553-10:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 22553-10:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22553-10:2022
INTERNATIONAL ISO
STANDARD 22553-10
First edition
2022-02
Paints and varnishes — Electro-
deposition coatings —
Part 10:
Edge protection
Peintures et vernis — Peintures d'électrodéposition —
Partie 10: Protection des arêtes
Reference number
ISO 22553-10:2022(E)
© ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22553-10:2022
ISO 22553-10:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22553-10:2022
ISO 22553-10:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and test equipment . 2
6 Test panels .3
7 Number of determinations . 3
8 Procedure .4
8.1 Coating of the test panels . 4
8.2 Corrosion test . 4
9 Evaluation . 4
10 Marking of the test result .5
11 Precision . 5
12 Test report . 5
iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 22553-10:2022
ISO 22553-10:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
A list of all parts in the ISO 22553 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 22553-10:2022
INTERNATIONAL STANDARD ISO 22553-10:2022(E)
Paints and varnishes — Electro-deposition coatings —
Part 10:
Edge protection
1 Scope
This document specifies a test method for the evaluation of protection against corrosion of edges and
stamping burrs by electro-deposition coatings.
It applies to electro-deposition coatings for automotive industries and other general industrial
applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
und
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.