iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 815:2000

(Main)

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock

This standard is applicable to unshielded tunnel boring machines, TBMs, and rodless shaft boring machines, SBMs, and their towed or attached back-up equipment for driving tunnels or shafts in rock where the whole area is excavated in one or more steps by mechanical means. It specifies essential safety requirements for the design, construction and maintenance of such machines when used in non-explosive atmosphere together with the methods of verification. The standard specifies monitoring for hazardous atmospheres.  For TBMs and SBMs which are to be used continuously in explosive atmosphere, additional relevant standards alos apply.  This European Standard deals with all significant hazards pertinent to unshielded tunnel boring machines and rodless shaft boring machines for rock, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.

Sicherheit von Tunnelbohrmaschinen ohne Schild und gestängelosen Schachtbohrmaschinen zum Einsatz in Fels

Diese Norm gilt für Tunnelbohrmaschinen ohne Schild, TBM genannt, gestängelose Schachtbohrmaschinen, SBM genannt, und deren gezogene oder mit ihnen verbundene Nachläufer, zum Vortrieb von Tunneln oder Schächten in Fels, bei denen der gesamte Querschnitt in einem oder mehreren Schritten mechanisch abgebaut wird. Die Norm spezifiziert notwendige Sicherheitsanforderungen in Bezug auf Konstruktion, Fertigung und Wartung solcher Maschinen, wenn sie in nicht-explosionsgefährdeten Bereichen eingesetzt werden, zusammen mit den Methoden der Verifizierung.

Sécurité des tunneliers sans bouclier et des machines foreuses pour puits sans tige de traction

La présente norme européenne s'applique aux tunneliers sans bouclier (TBM), aux machines foreuses pour puits sans tige de traction (SBM) et aux trains suiveurs remorqués ou attelés ou a leurs composants, pour creuser dans le rocher des tunnels ou des puits dont la pleine section est excavée en une ou plusieurs phases par des moyens mécaniques. Elle précise les prescriptions essentielles de sécurité pour la conception, la construction et la maintenance de telles machines lorsqu'elles ne sont pas utilisées en atmosphere explosible, en meme temps que les méthodes de vérification.

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
12-Oct-2008
ICS
91.220 - Construction equipment
93.060 - Tunnel construction
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Oct-2008
Due Date
26-Oct-2008
Completion Date
13-Oct-2008
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
EN 815:1996 - Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock

Relations

Consolidated By
SIST EN 815:2000+A2:2008 - Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
Effective Date
18-Jan-2023
Consolidated By
SIST EN 815:2000+A2:2008 - Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
Effective Date
19-Jan-2023
Amended By
SIST EN 815:2000/A1:2005 - Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
Effective Date
01-May-2005
Consolidated By
SIST EN 815:2000+A2:2008 - Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
Effective Date
01-Dec-2008

Buy Standard

EN 815:2000EN 815:2000
PreviousNext
Standard
EN 815:2000
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 815:2000
01-april-2000
Safety of unshielded tunnel boring machines and rodless shaft boring machines
for rock
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
Sicherheit von Tunnelbohrmaschinen ohne Schild und gestängelosen
Schachtbohrmaschinen zum Einsatz in Fels
Sécurité des tunneliers sans bouclier et des ma
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12110:2014(Main)
Tunnelling machines - Air locks - Safety requirements
EN 12110:2014

EN 12110 applies to the design, construction, equipping, marking and testing of air locks as defined in 3.3 including pressure bulkheads as defined in 3.4, which are to be used in tunnelling work. An oxygen breathing system used to provide the breathing supply necessary to conduct a safe decompression is also covered by this standard. This European Standard is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN. This European Standard deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not cover the supply of services to the air lock. Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks. This European Standard does not cover the hazards due to the mobility of the machinery.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16191:2014(Main)
Tunnelling machinery - Safety requirements
EN 16191:2014

EN 16191 is applicable to tunnelling machinery as defined in Clause 3 used for the construction of tunnels, shafts and other underground excavations. It deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard covers monitoring for hazardous atmospheres within the confines of the tunnelling machinery. Hand-arm and whole-body vibration are not considered as significant hazard for tunnelling machinery. The following items and applications are not covered by this European Standard: - the additional requirements for the use of tunnelling machinery under hyperbaric conditions; - the additional requirements for use of tunnelling machinery in potentially explosive atmospheres.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12111:2014(Main)
Tunnelling machines - Road headers and continuous miners - Safety requirements
EN 12111:2014

EN 12111 specifies all significant hazards, hazardous situations and events relevant to road headers and continuous miners as defined in Clause 3, when they are used as intended and under the conditions foreseen by the manufacturer. Where mentioned, this standard applies also to cutter head attachments and impact hammers mounted on excavators and in tunnel shields. This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Within the conditions stated by the manufacturer, overturning of the road header or continuous miner is not a significant hazard. Noise is not a significant hazard for cutter head attachments. Excavators and tunnel shields mentioned above are out with the scope of this standard and are covered by EN 474+A1 and EN 12336+A1 respectively. This European Standard also covers reasonably foreseeable misuse of such machinery in that compliance with the requirements of Clause 5 mitigates the risk arising from such misuse. The following items and applications are not covered by this European Standard: - the supply of electricity up to the main switch box; - use of the machine in potentially explosive atmospheres; - use of the machine under hyperbaric conditions - loading and transport equipment which is not an integral part of the machine; This European Standard covers monitoring for hazardous atmospheres. This European Standard is not applicable to machines manufactured before the date of publication of this European Standard by CEN.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12111:2003/kprA1:2009(Amendment)
Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
EN 12111:2002/prA1
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12110-2:2023(Main)
Tunnel boring machines - Air locks - Part 2: Safety requirements for the use of non-air breathing mixtures and saturation techniques in personnel locks and for pressurised transfer shuttles
prEN 12110-2

This document sets out additional requirements to those in prEN 12110-1 for personnel locks which are intended to have the capability for mixed gas breathing techniques or saturation techniques at pressures not exceeding 20 bar(g) and associated with tunnelling work. This document also sets out requirements for pressurized transfer shuttles as defined in 3.1.
prEN 12110-1 applies to the design, construction, equipping, marking and testing of air locks, as defined in 3.3, in tunnelling. prEN 12110-1 also covers requirements for manlocks utilizing compressed air as the pressurizing and breathing medium along with requirements for oxygen breathing systems for decompression purposes.
Air locks are normally an integral part of TBMs. Hence there are interfaces between the scope of prEN 12110-1:2023 and prEN 16191:2022. These are detailed in Clause 4 of this document.
The intended use of the machinery is agreed between the manufacturer and the user taking into account information on intended use, exposure techniques and decompression procedures provided by the user.
This document is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN.
NOTE   This document can help the design of air locks and bulkheads in other compressed air work in construction.
This document deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document does not cover the supply of services to the air lock from beyond the defined prEN 12110 1:2023/prEN 16191:2022 interface. This interface is set out in the text.
Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks.
The provision of mixed gas, air or oxygen is the responsibility of the user.
During transfer under pressure operations, the shuttle requires a fire suppression system, a climate control system, a power supply and a gas supply. Of these, the fire suppression system requires to be continuously connected and available for immediate activation. It is therefore considered to be part of the shuttle equipment covered by this standard as is the power supply. For the other two services only the capability to supply them is considered to be part of the shuttle requirements.

  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 16191:2023(Main)
Tunnel boring machines - Safety requirements
prEN 16191

This document is applicable to tunnel boring machines and associated machines and equipment as defined in Clause 3 used for the primary purpose of creating an underground void through the construction of horizontal and inclined tunnels and other underground excavations.
NOTE 1    Other underground excavations can include access structures to complex tunnel layouts such as in underground stations, utilities, underground storage facilities as well as below ground tunnel portals.
It deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see 4).
This document covers monitoring for hazardous atmospheres within the confines of the tunnel boring machines.
Requirements for air locks and pressurized transfer shuttles are covered by prEN 12110-1:2023 and prEN 12110-2:2023.
Hand-arm and whole-body vibration are not considered as significant hazards for tunnel boring machines.
The following items and applications are not covered by this document:
-   the additional requirements for the use of entire tunnelling machinery within a hyperbaric environment;
-   the additional requirements for use of tunnel boring machines in potentially explosive atmospheres;
NOTE 2    For the application in potentially explosive atmospheres, see EN ISO/IEC 80079 38:2016 for guidance.
-   ancillary tools and equipment which are not an integral part of the tunnel boring machine, but located on the machinery;
-   supply network for services to the tunnel boring machine (e.g. power supply, water, pipes, compressed air, ventilation duct, etc.);
-   loading and transport machinery which is not an integral part of the tunnel boring machine, e.g. delivery vehicle for logistic support, tunnel spoil removal system;
-   EMC interactions between the tunnelling machinery and third-party surface and underground assets, e.g. railway signalling.
This document is not applicable to tunnel boring machines which are manufactured before the date of publication of this European Standard by CEN.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12110-1:2023(Main)
Tunnel boring machines - Air locks - Part 1: requirements for air locks utilising compressed air as the pressurising or breathing medium along with requirements for oxygen breathing systems for decompression purposes
prEN 12110-1

This document applies to the design, construction, equipping, marking and testing of air locks, as defined in 3.3, which form an integral part of a tunnel boring machine. It covers requirements for personnel locks utilizing compressed air as the pressurizing or breathing medium along with requirements for oxygen breathing systems for decompression purposes. The intended use is restricted to the temperature range 5 °C to 50 °C.
This document also applies to the design, fabrication and testing of pressure bulkheads intended for use in forming in-tunnel or in-shaft air locks.
In addition, this document extends to control functions and control information relating to intermediate chambers (defined in prEN 12110-2:2023, 3.7) (if fitted) but which are accessed via the personnel lock control panel.
prEN 12110-2 sets out additional requirements to those in Part 1, for personnel locks which are intended to have the capability to utilize non-air breathing mixtures such as nitrox, trimix and heliox. prEN 12110 2 sets out additional requirements for personnel locks intended to be used for saturation exposure techniques at pressures not exceeding 20 bar(g) associated with tunnelling work. It also sets out requirements for pressurized transfer shuttles as defined in 3.3.5.
The intended use of the machinery is agreed between the manufacturer and the user taking into account information on intended use, intended location of use, intended exposure techniques and intended decompression procedures, all provided by the user.
Air locks are normally connected to or incorporated in tunnel boring machines and consequently there are a number of interfaces between machinery covered by this standard and machinery covered by prEN 16191:2022. These interfaces are identified in both standards as appropriate.
This document is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN.
NOTE 1   Air locks can be formed by the construction of one or more bulkheads in a tunnel secured to the tunnel lining. However, although the equipment required for tunnel air locks will be similar to that for TBM air locks, prEN 12110-1:2023 applies only to the design, fabrication and testing of bulkheads in this situation.
NOTE 2   Air locks can also be attached to an air deck in a shaft. Again, although the equipment required for such air locks will be similar to that for TBM air locks, prEN 12110-1:2023 applies only to the design, fabrication and testing of bulkheads (air decks) in shafts.
This document deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
The supply of compressed air and oxygen to the air lock is partly within the scope of prEN 12110-1:2023 and partly within the scope of prEN 16191:2022 and this division is clearly indicated within the text of both standards.
Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12110:2014(Main)
Tunnelling machines - Air locks - Safety requirements
EN 12110:2014

EN 12110 applies to the design, construction, equipping, marking and testing of air locks as defined in 3.3 including pressure bulkheads as defined in 3.4, which are to be used in tunnelling work. An oxygen breathing system used to provide the breathing supply necessary to conduct a safe decompression is also covered by this standard. This European Standard is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN. This European Standard deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not cover the supply of services to the air lock. Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks. This European Standard does not cover the hazards due to the mobility of the machinery.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16191:2014(Main)
Tunnelling machinery - Safety requirements
EN 16191:2014

EN 16191 is applicable to tunnelling machinery as defined in Clause 3 used for the construction of tunnels, shafts and other underground excavations. It deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard covers monitoring for hazardous atmospheres within the confines of the tunnelling machinery. Hand-arm and whole-body vibration are not considered as significant hazard for tunnelling machinery. The following items and applications are not covered by this European Standard: - the additional requirements for the use of tunnelling machinery under hyperbaric conditions; - the additional requirements for use of tunnelling machinery in potentially explosive atmospheres.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12111:2014(Main)
Tunnelling machines - Road headers and continuous miners - Safety requirements
EN 12111:2014

EN 12111 specifies all significant hazards, hazardous situations and events relevant to road headers and continuous miners as defined in Clause 3, when they are used as intended and under the conditions foreseen by the manufacturer. Where mentioned, this standard applies also to cutter head attachments and impact hammers mounted on excavators and in tunnel shields. This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Within the conditions stated by the manufacturer, overturning of the road header or continuous miner is not a significant hazard. Noise is not a significant hazard for cutter head attachments. Excavators and tunnel shields mentioned above are out with the scope of this standard and are covered by EN 474+A1 and EN 12336+A1 respectively. This European Standard also covers reasonably foreseeable misuse of such machinery in that compliance with the requirements of Clause 5 mitigates the risk arising from such misuse. The following items and applications are not covered by this European Standard: - the supply of electricity up to the main switch box; - use of the machine in potentially explosive atmospheres; - use of the machine under hyperbaric conditions - loading and transport equipment which is not an integral part of the machine; This European Standard covers monitoring for hazardous atmospheres. This European Standard is not applicable to machines manufactured before the date of publication of this European Standard by CEN.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day