iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10028-1:2001

(Main)

Flat products made of steels for pressure purposes - Part 1: General requirements

Flat products made of steels for pressure purposes - Part 1: General requirements

This European Standard EN 10028-1 specifies the general technical delivery conditions for flat products used principally for the construction of pressure equipments. The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.

Flacherzeugnisse aus Druckbehälterstählen - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm EN 10028-1 enthält die allgemeinen technischen Lieferbedingungen für die vornehmlich im Druckbehälterbau verwendeten Flacherzeugnisse. Bei Lieferungen nach dieser Europäischen Norm gelten ebenfalls die allgemeinen technischen Lieferbedingungen nach EN 10021.

Produits plats en aciers pour appareils a pression - Partie 1: Prescriptions générales

La présente norme européenne EN 10028-1 spécifie les conditions techniques générales de livraison des produits plats utilisés principalement dans la construction des appareils a pression. Les conditions techniques générales de livraison de l'EN 10021 s'appliquent également aux produits livrés conformément a la présente norme européenne.

Ploščati jekleni izdelki za tlačne posode - 1. del: Splošne zahteve

General Information

Status
Withdrawn
Publication Date
31-Oct-2001
Withdrawal Date
06-Jan-2008
ICS
77.140.30 - Steels for pressure purposes
77.140.50 - Flat steel products and semi-products
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
18-Dec-2007
Due Date
10-Jan-2008
Completion Date
07-Jan-2008
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/BC/CEN/87/15 - ECISS - 2nd programme
Ref Project
EN 10028-1:2000 - Flat products made of steels for pressure purposes - Part 1: General requirements

Relations

Amended By
SIST EN 10028-1:2001/A1:2003 - Flat products made of steels for pressure purposes - Part 1: General requirements - Amendment 1
Effective Date
22-Dec-2008
Replaces
SIST EN 10028-1:1996 - Flat products made of steels for pressure purposes - Part 1: General requirements
Effective Date
01-Nov-2001
Replaced By
SIST EN 10028-1:2008 - Flat products made of steels for pressure purposes General requirements
Effective Date
01-Feb-2008

Buy Standard

EN 10028-1:2001EN 10028-1:2001
PreviousNext
Standard
EN 10028-1:2001
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10028-1:2001
01-november-2001
1DGRPHãþD
SIST EN 10028-1:1996
3ORãþDWLMHNOHQLL]GHONL]DWODþQHSRVRGHGHO6SORãQH]DKWHYH
Flat products made of steels for pressure purposes - Part 1: General requirements
Flacherzeugnisse aus Druckbehälterstählen - Teil 1: Allgemeine Anforderungen
Produits plats en a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 10207:2018(Main)
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
EN 10207:2017

This document specifies the technical delivery requirements for flat products and bars made of steel in accordance with the specifications for pressurized parts in simple pressure vessels as defined in the Directive  2014/29/EU (see Annex A) and standardized in EN 286-1 to -3.
NOTE   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/29/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/29/EU is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/29/EU are satisfied, needs to be done.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-5:2017(Main)
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10028-5:2017

This European Standard specifies the requirements for flat products for pressure equipments made of thermomechanically rolled steels as specified in Table 1.
The steels are not suitable for hot forming.
NOTE 1   At the time of publication of this European Standard, no sufficient data for the standardization of the elevated temperature properties of these steels was available. If their use at such temperatures is intended the conditions for this should be specially agreed between the interested parties.
The requirements of prEN 10028-1:2014 also apply.
NOTE 2   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 5 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-2:2017(Main)
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-2:2017

This European Standard specifies requirements for flat products for pressure equipment made of weldable nonalloy
and alloy steels with elevated temperature properties.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-6:2017(Main)
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-6:2017

This European Standard specifies the requirements for flat products for pressure equipments made of quenched and tempered steels.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-1:2017(Main)
Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10028-1:2017

This European Standard specifies general technical delivery conditions for flat products for the construction of pressure equipment.
The general technical delivery conditions in EN 10021 also apply.
NOTE   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-3:2017(Main)
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10028-3:2017

This European Standard specifies requirements for flat products for pressure equipment made of weldable fine grain steels as specified in Table 1.
NOTE 1   Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with EN ISO 643.
The requirements and definitions of prEN 10028-1:2014 also apply.
NOTE 2   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 3 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-4:2017(Main)
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-4:2017

This European Standard specifies requirements for flat products for pressure equipment made of nickel alloy steels.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-7:2016(Main)
Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10028-7:2016

This European Standard specifies requirements for flat products for pressure purposes made of stainless steels, including austenitic creep resisting steels, in thicknesses as indicated in Tables 7 to 10.
The requirements of EN 10028-1:2007+A1:2009 also apply.
NOTE 1   The steel grades covered by this European Standard have been selected from EN 10088-1.
NOTE 2   Once this European Standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and Part 7) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10207:2018(Main)
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
EN 10207:2017

This document specifies the technical delivery requirements for flat products and bars made of steel in accordance with the specifications for pressurized parts in simple pressure vessels as defined in the Directive  2014/29/EU (see Annex A) and standardized in EN 286-1 to -3.
NOTE   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/29/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/29/EU is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/29/EU are satisfied, needs to be done.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10028-5:2017(Main)
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10028-5:2017

This European Standard specifies the requirements for flat products for pressure equipments made of thermomechanically rolled steels as specified in Table 1.
The steels are not suitable for hot forming.
NOTE 1   At the time of publication of this European Standard, no sufficient data for the standardization of the elevated temperature properties of these steels was available. If their use at such temperatures is intended the conditions for this should be specially agreed between the interested parties.
The requirements of prEN 10028-1:2014 also apply.
NOTE 2   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 5 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day