This document specifies a flame atomic absorption spectrometric method (FAAS) for the determination of calcium content in non-alloy and low alloy steels.
The method is applicable to calcium contents between 0,000 4 % and 0,012 %.
The method can be adapted to higher calcium contents by changing the test portion or the dilution process, provided the criteria in 5.2.2 and 5.2.3 are still met.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies a flame atomic absorption spectrometric method (FAAS) for the determination of lead content in non-alloy and low alloy steels.
The method is applicable to lead contents between 0,005 % and 0,5 %.
The method can be adapted to lower or higher lead contents by changing the test portion or the dilution process, provided the criteria in 5.2.2 and 5.2.3 are still met.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies a flame atomic absorption spectrometric method (FAAS) for the determination of nickel content in steels and cast irons.
The method is applicable to nickel contents between 0,004 % and 2,0 %.
The method can be adapted to lower or higher nickel contents by changing the test portion or the dilution process, provided the criteria in 5.2.2 and 5.2.3 are still met.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies a flame atomic absorption spectrometric method (FAAS) for the determination of lead content in non-alloy and low alloy steels.
The method is applicable to lead contents between 0,005 % (weight percent) and 0,5 % (weight percent).
The method can be adapted to lower or higher lead contents by changing the test portion or the dilution process, provided the criteria in 6.2.2 and 6.2.3 are still met.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies a flame atomic absorption spectrometric method (FAAS) for the determination of calcium content in non-alloy and low alloy steels.
The method is applicable to calcium contents between 4 µg/g and 120 µg/g.
The method can be adapted to higher calcium contents by changing the test portion or the dilution process, provided the criteria in 6.2.2 and 6.2.3 are still met.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies a flame atomic absorption spectrometric method (FAAS) for the determination of nickel content in steels and cast irons.
The method is applicable to nickel contents between 0,004 % (weight percent) and 2,0 % (weight percent).
The method can be adapted to lower or higher nickel contents by changing the test portion or the dilution process, provided the criteria in 6.2.2 and 6.2.3 are still met.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to cold rolled uncoated and electrolytically zinc or zinc-nickel coated low carbon and high yield strength steel flat products for cold forming with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of ordering, less than or equal to 3 mm thick, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet. The concerned standards are EN 10130, EN 10152, EN 10271, EN 10209, EN 10268 and prEN 10338.
It d...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to cold rolled uncoated and electrolytically zinc or zinc-nickel coated low carbon and high yield strength steel flat products for cold forming with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of ordering, less than or equal to 3 mm thick, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet. The concerned standards are EN 10130, EN 10152, EN 10271, EN 10209, EN 10268 and prEN 10338.
It d...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 4934:2003 specifies a gravimetric method for the determination of the sulfur content in steels and iron, excluding steels containing selenium. The method is particularly suitable as a reference method for the standardization of samples on which certified standard values are to be established.
The method is applicable to a sulfur content between 0,003 % (mass fraction) and 0,35 %(mass fraction).

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

ISO 4934:2003 specifies a gravimetric method for the determination of the sulfur content in steels and iron, excluding steels containing selenium. The method is particularly suitable as a reference method for the standardization of samples on which certified standard values are to be established.
The method is applicable to a sulfur content between 0,003 % (mass fraction) and 0,35 %(mass fraction).

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies two methods for the preparation of steel samples for oxygen determination. Both methods are suitable for preparing samples for the determination of oxygen content, especially for oxygen contents < 0,0050 %. This standard is applicable to steels having a hardness of < 400 HBW 10/3000.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the tolerances on dimensions, shape and mass of hot-rolled steel channels with tapered flanges or parallel flanges. These requirements do not apply to channels produced from stainless steel.

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies two methods for the preparation of steel samples for oxygen determination. Both methods are suitable for preparing samples for the determination of oxygen content, especially for oxygen contents < 0,0050 %. This standard is applicable to steels having a hardness of < 400 HBW 10/3000.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This annex is applicable to pig-iron in the solid state, unless otherwise agreed at the time of ordering

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the tolerances on dimensions, shape and mass of hot-rolled steel channels with tapered flanges or parallel flanges. These requirements do not apply to channels produced from stainless steel.

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day

This European standard specifies a spectrophotometric method for the determination of arsenic in steel and iron. The method is applicable to all types of steel and iron with arsenic contents from 0,001% to 0,08% (m/m).

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This European Standard  specifies a method for the determination of chromium in steels and irons by means of flame atomic absorption spectrometry.
The method is applicable to non-alloy and low-alloy steels and irons with chromium contents of 0,002 to 0,02 % (m/m) (see Annex).

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This European standard specifies tolerances on shape dimensions and mass of structural steel I and H sections. These requirements do not apply to I and H sections rolled from stainless steel. These requirements do not apply to taper flange sections. Note: Until a European standard for dimensions of I and H beams is published, Euronorm 19 and Euronorm 53 or corresponding national standards may be used.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This EURONORM specifies a method for the spectrophotometric determination of nitrogen in steels.
The method is primarily intended for the determination of total nitrogen in very low nitrogen non-alloy steels. It may be used, however, for any low nitrogen ferrous alloy that is soluble in hydrochloric acid provided that the acid-resistant form of silicon nitride is not present. This highly resistant nitride has been found only in samples of silicon steels manufactured without aluminium addition...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This EURONORM specifies a method for the spectrophotometric determination of niobium in steels.
The method is applicable to all types of steels with niobium contents up to 1,3 % (m/m), with a lower detection limit of 0,002 % (m/m).

    • sale 10% off
    • Standard
      6 pages
      English language
    • e-Library read for
      1 day

Mutual understanding and communication. Quality.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This European standard specifies a spectrophotometric method for the determination of arsenic in steel and iron. The method is applicable to all types of steel and iron with arsenic contents from 0,001% to 0,08% (m/m).

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This European standard specifies tolerances on shape dimensions and mass of structural steel I and H sections. These requirements do not apply to I and H sections rolled from stainless steel. These requirements do not apply to taper flange sections. Note: Until a European standard for dimensions of I and H beams is published, Euronorm 19 and Euronorm 53 or corresponding national standards may be used.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This annex is applicable to pig-iron in the solid state, unless otherwise agreed at the time of ordering

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

The method is applicable to copper contents between 0.004 % (m/m) and 0.5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests. Annex B includes the graphical representation of precision data.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This European Standard  specifies a method for the determination of chromium in steels and irons by means of flame atomic absorption spectrometry.
The method is applicable to non-alloy and low-alloy steels and irons with chromium contents of 0,002 to 0,02 % (m/m) (see Annex).

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This EURONORM specifies a method for the spectrophotometric determination of nitrogen in steels.
The method is primarily intended for the determination of total nitrogen in very low nitrogen non-alloy steels. It may be used, however, for any low nitrogen ferrous alloy that is soluble in hydrochloric acid provided that the acid-resistant form of silicon nitride is not present. This highly resistant nitride has been found only in samples of silicon steels manufactured without aluminium addition...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This EURONORM specifies a method for the spectrophotometric determination of niobium in steels.
The method is applicable to all types of steels with niobium contents up to 1,3 % (m/m), with a lower detection limit of 0,002 % (m/m).

    • sale 10% off
    • Standard
      6 pages
      English language
    • e-Library read for
      1 day