SIST EN 50131-8:2009
Alarm systems - Intrusion hold-up alarm systems -- Part 8: Security fog device/systems
Alarm systems - Intrusion hold-up alarm systems -- Part 8: Security fog device/systems
This European Standard specifies the requirements for security fog systems as a part of an I&HAS. It covers application and performance and also gives the necessary tests and trials to ensure efficiency and reliability of such obscuration devices. This European Standard also gives guidance on the criteria for design, installation, operation and maintenance of security fog systems.
Alarmanlagen - Einbruch- und Überfallmeldeanlagen - Teil 8: Nebelgeräte/Nebelsysteme für Sicherungsanwendungen
Diese Europäische Norm beschreibt die Anforderungen an Sicherheitsnebelsysteme, die Teil einer EMA/ÜMA sind. Sie deckt die Anwendung und die Leistungsmerkmale ab und gibt die notwendigen Prü¬fun-gen und Probeläufe an, mit denen die Effizienz und die Zuverlässigkeit solcher Vernebelungsgeräte sicher-gestellt werden. Diese Europäische Norm gibt auch eine Anleitung für Vorgaben von Planung, Einbau, Betrieb und Instand-haltung von Sicherheitsnebelsystemen.
Systèmes d'alarme - Systèmes d'alarme contre l’intrusion et les hold-up - Partie 8: Systèmes/dispositifs générateurs de fumée
La présente Norme Européenne spécifie les exigences relatives aux systèmes générateurs de fumée dans le cadre d’un système d'alarme contre l’intrusion et les hold-up (I&HAS Intrusion and Hold-Up Alarm System). Elle couvre l’application et les performances et fournit également les essais et mises à l’épreuve nécessaires pour garantir l’efficacité et la fiabilité de tels dispositifs d’obscurcissement. Cette Norme Européenne donne par ailleurs des lignes directrices sur les critères de conception, d'installation, de fonctionnement et de maintenance des systèmes générateurs de fumée.
Alarmni sistemi - Sistemi za javljanje vloma - 8. del: Sistem za varnostno meglo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50131-8:2009
01-oktober-2009
Alarmni sistemi - Sistemi za javljanje vloma - 8. del: Sistem za varnostno meglo
Alarm systems - Intrusion hold-up alarm systems -- Part 8: Security fog device/systems
Ta slovenski standard je istoveten z: EN 50131-8:2009
ICS:
13.310 Varstvo pred kriminalom Protection against crime
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST EN 50131-8:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50131-8:2009
---------------------- Page: 2 ----------------------
SIST EN 50131-8:2009
EUROPEAN STANDARD
EN 50131-8
NORME EUROPÉENNE
May 2009
EUROPÄISCHE NORM
ICS 13.320
English version
Alarm systems -
Intrusion and hold-up systems -
Part 8: Security fog device/systems
Systèmes d'alarme - Alarmanlagen -
Systèmes d'alarme contre l’intrusion Einbruch- und Überfallmeldeanlagen -
et les hold-up - Teil 8: Nebelgeräte/Nebelsysteme
Partie 8: Systèmes/dispositifs für Sicherungsanwendungen
générateurs de fumée
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50131-8:2009 E
---------------------- Page: 3 ----------------------
SIST EN 50131-8:2009
EN 50131-8:2009 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 79, Alarm systems.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50131-8
on 2009-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-04-01
The series EN/TS 50131 will consist of the following parts, under the general title “Alarm systems –
Intrusion and hold-up systems”:
Part 1 System requirements
Part 2-2 Intrusion detectors – Passive infrared detectors
Part 2-3 Requirements for microwave detectors
Part 2-4 Requirements for combined passive infrared and microwave detectors
Part 2-5 Requirements for combined passive infrared and ultrasonic detectors
Part 2-6 Opening contacts (magnetic)
Part 2-7-1 Intrusion detectors – Glass break detectors (acoustic)
Part 2-7-2 Intrusion detectors – Glass break detectors (passive)
Part 2-7-3 Intrusion detectors – Glass break detectors (active)
Part 3 Control and indicating equipment
Part 4 Warning devices
Part 5-3 Requirements for interconnections equipment using radio frequency techniques
Part 6 Power supplies
Part 7 Application guidelines
Part 8 Security fog devices/systems
__________
---------------------- Page: 4 ----------------------
SIST EN 50131-8:2009
– 3 – EN 50131-8:2009
Contents
Introduction . 5
1 Scope . 6
2 Normative references. 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Environmental . 7
4.1 Environmental classification . 7
4.2 Environmental tests . 7
5 Access levels . 8
6 Regulation requirements . 8
6.1 General . 8
6.2 Electrical safety . 8
6.3 Safety data sheets . 8
6.4 EMC requirements . 8
6.5 Warning signs . 8
6.6 Pressure vessels . 8
7 Device/system parameters . 9
7.1 Performance . 9
7.2 Battery backup requirement . 9
7.3 IP/IK rating . 9
7.4 Wire free interconnections . 9
8 General requirements . 9
8.1 Tamper . 9
8.2 Fog neutralisation. 9
8.3 Discharge nozzle.10
8.4 Fog eject limiter .10
8.5 Heating unit .10
8.6 Overheating .10
8.7 Accidental triggering .10
8.8 Isolation of the security fog system .10
8.9 Fixings .10
9 Operational requirements .10
9.1 Communication .10
9.2 Fault monitoring .11
9.3 Power failure .11
9.4 Efficacy .11
9.5 Non-toxicity .12
9.6 Residue .12
---------------------- Page: 5 ----------------------
SIST EN 50131-8:2009
EN 50131-8:2009 – 4 –
10 Consumables .12
10.1 Replenishment .12
10.2 Formulation .12
10.3 Traceability .12
11 M arking .12
12 Documentation .12
13 Design, installation, operation and maintenance (informative) .12
Annex A (normative) Performance tests .13
Annex B (normative) Security fog system warning sign .20
Annex C (informative) Guidance on design, installation, operation and maintenance
of the security fog system .22
Bibliography .24
Figures
Figure A.1 – Test chamber . 17
Figure A.2 – Target . 18
Figure A.3 – Partial target. 19
Figure B.1 – Security fog system warning sign . 20
Tables
Table A.1 . 15
Table A.2 . 16
Table B.1 – How to calculate the size of sign you need . 21
---------------------- Page: 6 ----------------------
SIST EN 50131-8:2009
– 5 – EN 50131-8:2009
Introduction
This European Standard applies to a security fog system that is part of an Intruder and Hold-up Alarm
System (I&HAS) and is used both as a security deterrent device for building security and as a crime
reduction device for the protection of people.
This European Standard is intended to assist insurers, intruder alarm companies, customers and the
police in understanding the principles and specification of a security fog system.
The purpose of a security fog system is to reduce the visibility in a protected area by the use of a
non-toxic fog in order to form a barrier between the criminal and the criminal’s intended target.
This European Standard is not intended to cover standalone or mobile security fog systems.
This European Standard has been designed to be flexible enough to encourage and encompass
future developments in the field of security fog systems.
---------------------- Page: 7 ----------------------
SIST EN 50131-8:2009
EN 50131-8:2009 – 6 –
1 Scope
This European Standard specifies the requirements for security fog systems as a part of an I&HAS. It
covers application and performance and also gives the necessary tests and trials to ensure efficiency
and reliability of such obscuration devices.
This European Standard also gives guidance on the criteria for design, installation, operation and
maintenance of security fog systems.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 50130-4:1995 Alarm systems – Part 4: Electromagnetic compatibility – Product family
A1:1998 standard: Immunity requirements for components of fire, intruder and social
A2:2003 alarm systems
EN 50130-5:1998 Alarm systems – Part 5: Environmental test methods
EN 50131-1:2006 Alarm systems – Intrusion and hold-up systems – Part 1: System
requirements
EN 50131-5-3:2005 Alarm systems – Intrusion systems – Part 5-3: Requirements for
A1:2008 interconnections equipment using radio frequency techniques
EN 60065:2002 Audio, video and similar electronic apparatus – Safety requirements
A1:2006 (IEC 60065:2001, mod. + A1:2005, mod.)
+ corr. Aug. 2007
A11:2008
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) – Part 6-3: Generic standards –
Emission standard for residential, commercial and light-industrial
environments (IEC 61000-6-3:2006)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this document, the terms and definitions given in EN 50131-1 and the following
apply.
3.1.1
confirmed intrusion
signals or messages emanating from two or more independent intrusion detectors indicating there is a
high probability that a genuine intrusion or genuine attempted intrusion has occurred within a specified
timeframe
3.1.2
obscuration
the reduction in visibility as a result of the activation of a security fog system
---------------------- Page: 8 ----------------------
SIST EN 50131-8:2009
– 7 – EN 50131-8:2009
3.1.3
protected area
the designated space the security fog system is designed to restrict the visibility in when operated
3.1.4
security fog system
a device (or a series of separate independent components that make up a device) or system within
tamper resistance housing(s), that, when activated, produces a dense artificial fog, from a
consumable, to reduce visibility in the protected area
3.1.5
verification
the process whereby the security fog system will only operate once the Intruder Alarm System (IAS)
has operated and a detection device in the area of the security fog system has triggered or an Hold-up
Alarm System (HAS) has been operated
3.1.6
wet fog
this may result from incomplete atomisation of the fogging agent causing a direct spray or spatter from
the fog ejection nozzle. This may also result from poor atomisation of the fogging agent causing
individual fog particle size to be too large. Such large particles may fall down and settle on level
surfaces as a greasy residue
3.2 Abbreviations
For the purposes of this document, the abbreviations given in EN 50131-1 and the following apply.
EMC Electromagnetic compatibility
IK Degrees of protection provided by enclosures for electrical equipment against
external mechanical impacts
IP Ingress protection classification
LEA Law Enforcement Authority (Police or governmental body that responds to
activations from security systems)
4 Environmental
4.1 Environmental classification
The security fog system shall meet, as a minimum, Environmental Class II (Indoor – General:
environmental influences normally experienced indoors when the temperature is not well maintained)
in accordance with EN 50131-1.
EXAMPLE In corridors, halls or staircases and where condensation can occur on windows and in unheated storage areas or
warehouses where heating is intermittent.
NOTE Temperatures may be expected to vary between -10 °C and +40 °C with the average relative humidity of
approximately 75 % non-condensing.
4.2 Environmental tests
For all operation the security fog system shall not activate, generate tamper, fault or other signals or
messages when subject to the specific range of environmental and EMC conditions and shall continue
to function normally.
---------------------- Page: 9 ----------------------
SIST EN 50131-8:2009
EN 50131-8:2009 – 8 –
The following Class II level environmental tests from EN 50130-5 shall be applicable when testing the
security fog system:
a) Clause 8: dry heat operational;
b) Clause 10: cold test operational;
c) Clause 14: damp heat, cyclic operational;
d) Clause 17: sulphur dioxide (SO ) (endurance);
2
e) Clause 20: impact operational;
f) Clause 22: vibration sinusoidal (operational);
g) Clause 23: vibration sinusoidal (endurance);
h) Clause 27: electromagnetic compatibility, immunity (operational).
5 Access levels
The access levels used in this standard shall be as stated in EN 50131-1:2006, 8.3.1, except for
access level 2. Access level 2 “user” shall not be able to access the security fog system.
6 Regulation requirements
6.1 General
The security fog system shall operate to the following minimum relevant European regulations.
6.2 Electrical safety
The electrical (safety) construction of the security fog system shall be to EN 60065.
6.3 Safety data sheets
The transport, storage and handling of consumables, shall comply with the requirements stated on the
safety data sheets.
6.4 EMC requirements
The security fog system shall meet the EMC conditions and the severity levels defined in
EN 61000-6-3 and EN 50130-4.
6.5 Warning signs
As a minimum security fog device/system warning signs shall be positioned on the normal entry
point(s) to the building (European safety signs Directive 92/58/EEC). See Annex B.
6.6 Pressure vessels
Any security fog system that contains pressure vessels shall be transportation and its usage shall
meet the current industry safety requirements (see Directive 97/23/EC, Article 3).
---------------------- Page: 10 ----------------------
SIST EN 50131-8:2009
– 9 – EN 50131-8:2009
7 Device/system parameters
7.1 Performance
The security fog system shall meet the following minimum performance:
- Reduction of visibility to 1 m within 60 s in a minimum volume of 150 m³ and maintai
...
SLOVENSKI STANDARD
oSIST prEN 50131-8:2008
01-april-2008
Alarmni sistemi - Sistemi za javljanje vloma - 8. del: Naprava in sistem za pripravo
megle za varovanje
Alarm system - Intrusion and hold up-systems - Part 8: Security fog device/system
Alarmanlagen - Einbruch- und Überfallmeldeanlagen - Teil 8: Nebelgeräte/Nebelsysteme
für Sicherheitsanwendungen
Systèmes d'alarme - Systèmes d'alarme contre l’intrusion et les hold-up - Partie 8:
Générateur de fumée / Système de générateurs de fumée
Ta slovenski standard je istoveten z: prEN 50131-8:2007
ICS:
13.320
oSIST prEN 50131-8:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
DRAFT
EUROPEAN STANDARD
prEN 50131-8
NORME EUROPÉENNE
December 2007
EUROPÄISCHE NORM
ICS
English version
Alarm system -
Intrusion and hold up-systems -
Part 8: Security fog device/system
Systèmes d'alarme - Alarmanlagen -
Systèmes d'alarme contre l’intrusion et les Einbruch- und Überfallmeldeanlagen -
hold-up - Teil 8: Nebelgeräte/Nebelsysteme für
Partie 8: Générateur de fumée / Système Sicherheitsanwendungen
de générateurs de fumée
This draft European Standard is submitted to CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2008-05-16.
It has been drawn up by CLC/TC 79.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to
change without notice and shall not be referred to as a European Standard.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 17059 Ref. No. prEN 50131-8:2007 E
Draft for Enquiry
---------------------- Page: 2 ----------------------
prEN 50131-8:2007 – 2 –
Foreword
This draft European Standard was prepared by the Technical Committee CENELEC TC 79, Alarm
systems. It is submitted to the CENELEC enquiry.
EN 50131 will consist of the following parts, under the general title Alarm systems – Intrusion and
hold-up systems:
Part 1 System requirements
Part 2-2 Intrusion detectors – Passive infrared detectors
Part 2-3 Intrusion detectors – Microwave detectors
Part 2-4 Intrusion detectors – Combined passive infrared and microwave detectors
Part 2-5 Intrusion detectors – Combined passive infrared and ultrasonic detectors
Part 2-6 Intrusion detectors – Opening contacts (magnetic)
Part 2-7 Intrusion detectors – Glass break detectors acoustic or seismic
Part 2-8 Intrusion detectors – Vibration detectors
Part 2-9 Intrusion detectors – Active infrared detectors
Part 2-10 Intrusion detectors – Proximity detectors
Part 3 Control and indicating equipment
Part 4 Warning devices
Part 5-1 Requirements for interconnections equipment using dedicated wired links
Part 5-2 Requirements for interconnections equipment using non-dedicated wired links
Part 5-3 Requirements for interconnections equipment using radio frequency techniques
Part 6 Power supplies
Part 7 Application guidelines
Part 8 Security fog device/system
Draft for Enquiry
---------------------- Page: 3 ----------------------
– 3 – prEN 50131-8:2007
Contents
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Environmental . 7
4.1 Environmental classification . 7
4.2 Environmental tests . 7
5 Access levels . 8
5.1 Access – General . 8
5.2 Levels of access . 8
6 Regulation requirements . 8
6.1 General . 8
6.2 Electrical safety . 8
6.3 Safety data sheets . 8
6.4 EMC requirements . 8
6.5 Warning signs . 8
6.6 Pressure vessels . 8
7 Device/system parameters . 9
7.1 Performance . 9
7.2 Battery backup requirement . 9
7.3 IP/IK rating . 9
7.4 Wire free interconnections . 9
8 General requirements . 9
8.1 Tamper . 9
8.2 Fog neutralisation . 9
8.3 Discharge nozzle . 9
8.4 Fog eject limiter . 10
8.5 Heating unit . 10
8.6 Overheating . 10
8.7 Accidental triggering . 10
8.8 Fixings . 10
8.9 Design, installation, operation and maintenance . 10
Draft for Enquiry
---------------------- Page: 4 ----------------------
prEN 50131-8:2007 – 4 –
9 Operational requirements .10
9.1 Communication . 10
9.2 Fault monitoring . 11
9.3 Power failure . 11
9.4 Efficacy . 11
9.5 Non-toxicity . 11
9.6 Residue . 11
10 Consumables .11
10.1 Replenishment . 11
10.2 Formulation. 11
10.3 Traceability . 11
11 Marking .11
12 Documentation .12
Annex A (normative) Performance tests .13
Annex B (normative) Security fog device/system warning sign .20
Annex C (informative) Guidance on design, installation, operation and maintenance of
security fog devices .22
Bibliography .24
Figures
Figure A.1 – Test chamber . 17
Figure A.2 – Target . 18
Figure A.3 – Partial target. 19
Figure B.1 – Security fog device/system warning sign . 20
Tables
Table A.1 . 15
Table A.2 . 16
Table B.1 – How to calculate the size of sign you need . 21
Draft for Enquiry
---------------------- Page: 5 ----------------------
– 5 – prEN 50131-8:2007
Introduction
This European Standard applies to security fog devices/systems that are part of an I & HAS and are
used both as a security deterrent device for building security and as a crime reduction device for the
protection of people.
This European Standard is intended to assist insurers, intruder alarm companies, customers and the
police in understanding the principles and specification of a security fog device.
The purpose of a security fog device/system is to reduce the visibility in a protected area by the use of
a non-toxic fog in order to form a barrier between the criminal and the criminal’s intended target.
This European Standard is not intended to cover standalone or mobile security fog device/systems.
This European Standard has been designed to be flexible enough to encourage and encompass
future developments in the field of security fog devices.
Draft for Enquiry
---------------------- Page: 6 ----------------------
prEN 50131-8:2007 – 6 –
1 Scope
This European Standard specifies the requirements for security fog devices as a part of an I & HAS. It
covers application and performance and also gives the necessary tests and trials to ensure efficiency
and reliability of such obscuration devices.
This European Standard also gives guidance on the criteria for design, installation, operation and
maintenance of security fog devices.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 50130-4:1995 Alarm systems – Part 4: Electromagnetic compatibility – Product family
+A1:1998 standard: Immunity requirements for components of fire, intruder and social
+A2:2003 alarm systems
EN 50130-5:1998 Alarm systems – Part 5: Environmental test methods
EN 50131-1:2006 Alarm systems – Intrusion and hold-up systems – Part 1: System
requirements
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this document, the following terms and definitions apply in addition to those given
in EN 50131-1.
3.1.1
confirmed intrusion
signals emanating from two or more independent intrusion detectors indicating there is a high
probability that a genuine intrusion or genuine attempted intrusion has occurred within a specified
timeframe
3.1.2
obscuration
the term is used to describe the reduction in visibility as a result of the activation of a security fog
device
3.1.3
protected area
this is the designated space the security fog device is designed to restrict the visibility in when
operated
3.1.4
security fog device(s)
a device (or a series of separate independent components that make up a device) within tamper
resistance housing(s), that, when activated, produces a dense artificial fog, from a consumable, to
reduce visibility in the protected area
Draft for Enquiry
---------------------- Page: 7 ----------------------
– 7 – prEN 50131-8:2007
3.1.5
verification
the security fog device will only operate once the I & HAS has operated and a detection device in the
area of the security fog device has triggered
3.1.6
wet fog
wet fog may result from incomplete atomisation of the fogging agent causing a direct spray or spatter
from the fog ejection nozzle. Wet fog may also result from poor atomisation of the fogging agent
causing individual fog particle size to be too large. Such large particles may fall down and settle on
level surfaces as a greasy residue
3.2 Abbreviations
For the purposes of this document, the following abbreviations apply.
ARC Alarm Receiving Centre
CIE Control and Indicating Equipment
EMC Electromagnetic compatibility
HAS Hold-up Alarm System
IK Impact test classification
IP Ingress Protection classification
I & HAS Intruder and Hold-up Alarm System
LEA Law Enforcement Authority (Police or governmental body that responds to
activations from security systems)
4 Environmental
4.1 Environmental classification
All security fog devices/systems shall meet, as a minimum, Environmental Class II (Indoor – General:
environmental influences normally experienced indoors when the temperature is not well maintained).
EXAMPLES In corridors, halls or staircases and where condensation can occur on windows and in unheated storage areas or
warehouses where heating is intermittent.
NOTE Temperatures may be expected to vary between -10 °C and +40 °C with the average relative humidity of approximately
75 % non-condensing.
4.2 Environmental tests
The following Class II level environmental tests from EN 50130-5 are applicable when testing security
fog devices:
a) Clause 8: dry heat operational;
b) Clause 10: cold test operational;
c) Clause 14: damp heat, cyclic operational;
d) Clause 17: sulphur dioxide (SO ) endurance;
2
Draft for Enquiry
---------------------- Page: 8 ----------------------
prEN 50131-8:2007 – 8 –
e) Clause 20: impact operational;
f) Clause 22: vibration sinusoidal operational;
g) Clause 23: vibration sinusoidal endurance;
h) Clause 27: EMC operational (EN 50130-4).
5 Access levels
5.1 Access – General
The access levels used in this standard are as stated in EN 50131-1 except for access level 2. Access
level 2 “user” should not be able to access the security fog device.
5.2 Levels of access
The levels of access are as follows:
• level 1 – no functions available to user;
• level 2 – functions available from I & HAS (tests, etc.);
• level 3 – maintenance company (replenish consumables, etc.);
• level 4 – manufacturer (replacement components).
6 Regulation requirements
6.1 General
The security fog device should operate to the following minimum relevant European regulation.
6.2 Electrical safety
The electrical (safety) construction of the security fog device should be to EN 60065.
6.3 Safety data sheets
The transport, storage and handling of consumables, with respect to their nature (see specific safety
data sheets).
6.4 EMC requirements
The security fog device should meet the EMC conditions and the severity levels defined in
EN 61000-6-3 and EN 50130-4.
6.5 Warning signs
Security fog device/system warning signs shou
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.