SIST EN 3155-044:2020

Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard

This document specifies the required characteristics and tests applicable to electrical contacts, male 044, type A, double crimping, class T, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contact is defined in EN 3155-045.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 044: Elektrischer Stiftkontakt 044, Typ A, doppelt gecrimpt, Klasse T - Produktnorm

Dieses Dokument legt die Anforderungen und Prüfungen von elektrischen Stiftkontakten 044, Typ A, doppelt gecrimpt, Klasse T, zur Verwendung in elektrischen Verbindungselementen nach EN 3155 002 fest.
Es ist in Verbindung mit EN 3155 001 anzuwenden.
Der zugehörige Buchsenkontakt ist in EN 3155 045 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 044 : Contacts électriques, mâles 044, type A, double sertissage, classe T - Norme de produit

Le présent document spécifie les caractéristiques requises et les essais applicables aux contacts électriques mâles 044, de type A, double sertissage, de classe T, utilisés dans les organes de connexion suivant l’EN 3155-002.
Il doit être utilisé conjointement avec l’EN 3155-001.
Les contacts femelles associés sont définis dans l’EN 3155-045.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 044. del: Kontakti, električni, moški 044, tip A, dvojno zaključeni, razred T - Standard za proizvod

Ta dokument določa zahtevane značilnosti in preskuse za električne kontakte, moške, velikosti 044, tipa A, dvojno nagubane, razreda T, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155 -002. Uporabljati ga je treba skupaj s standardom EN 3155-001. Povezani ženski kontakti so določeni v standardu EN 3155-045.

General Information

• Status: Published
• Publication Date: 22-Dec-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Dec-2019
• Due Date: 23-Feb-2020
• Completion Date: 23-Dec-2019
• Ref Project: EN 3155-044:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard

Relations

• Revised: SIST EN 3155-044:2009 - Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard
• Effective Date: 24-Aug-2016
• Replaces: SIST EN 3155-044:2009 - Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard
• Effective Date: 18-Dec-2019
• Replaces: SIST EN 3155-044:2009 - Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3155-044:2020
01-februar-2020
Nadomešča:
SIST EN 3155-044:2009
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 044. del:
Kontakti, električni, moški 044, tip A, dvojno zaključeni, razred T - Standard za
proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 044:
Contacts, electrical, male 044, type A, double crimping, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 044: Elektrischer Stiftkontakt 044, Typ A, doppelt gecrimpt, Klasse T - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
044 : Contacts électriques, mâles 044, type A, double sertissage, classe T - Norme de
produit
Ta slovenski standard je istoveten z: EN 3155-044:2019
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3155-044:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3155-044:2020

---------------------- Page: 2 ----------------------
SIST EN 3155-044:2020


EN 3155-044
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-044:2007
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 044: Contacts, electrical, male 044, type
A, double crimping, class T - Product standard
Série aérospatiale - Contacts électriques, utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 044 : Contacts Verwendung in Verbindungselementen - Teil 044:
électriques, mâles 044, type A, double sertissage, classe Elektrischer Stiftkontakt 044, Typ A, doppelt gecrimpt,
T - Norme de produit Klasse T - Produktnorm
This European Standard was approved by CEN on 26 August 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-044:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3155-044:2020
EN 3155-044:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
5 Designation . 11
6 Marking . 11
7 Technical specification . 11

2

---------------------- Page: 4 ----------------------
SIST EN 3155-044:2020
EN 3155-044:2019 (E)
European foreword
This document (EN 3155-044:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2020, and conflicting national standards shall be withdrawn at
the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-044:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia,
Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 3155-044:2020
EN 3155-044:2019 (E)
1 Scope
This document specifies the required characteristics and tests applicable to electrical contacts, male 044,
type A, double crimping, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contact is defined in EN 3155-045.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods —
General
EN 2997-001, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or
non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak —
Part 001: Technical specification
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and
utilization of contacts
EN 3155-045, Aerospace series — Electrical contacts used in elements of connection — Part 045: Contacts,
electrical, female, type A, double crimping, class T — Product standard
EN 4434, Aerospace series — Cop
...