Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test

This standard specifies a method of checking the ability of optical connection elements (including permanent connections) and fibre optic to withstand damp heat.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6321: Optische Elemente - Feuchte Wärme, zyklische Prüfung

Diese Norm legt ein Verfahren zur Prüfung der Widerstandsfähigkeit von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern gegenüber feuchter Wärme fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6321: Organes optiques - Chaleur humide, essai cyclique

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test

General Information

Status
Published
Publication Date
30-Apr-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Buy Standard

Standard
EN 2591-6321:2004
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic testLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6321: Optische Elemente - Feuchte Wärme, zyklische PrüfungSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6321: Organes optiques - Chaleur humide, essai cycliqueAerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-6321:2002SIST EN 2591-6321:2004en01-maj-2004SIST EN 2591-6321:2004SLOVENSKI
STANDARD



SIST EN 2591-6321:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-6321June 2002ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 6321: Optical elements - Damp heat,cyclic testSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 6321: Organesoptiques - Chaleur humide, essai cycliqueLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 6321: OptischeElemente - Feuchte Wärme zyklische PrüfungThis European Standard was approved by CEN on 8 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-6321:2002 ESIST EN 2591-6321:2004



EN 2591-6321:2002 (E)2ForewordThis document (EN 2591-6321:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2002, and conflicting national standards shall bewithdrawn at the latest by December 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United KingdomSIST EN 2591-6321:2004



EN 2591-6321:2002 (E)31ScopeThis standard specifies a method of checking the ability of optical connection elements (including permanentconnections) and fibre optic to withstand damp heat.It shall be used together with EN 2591-100.2Normative re
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.