SIST EN ISO 9311-2:2003
(Main)Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002)
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002)
This European standard describes a method for the determination of shear strength of joints made with adhesives for thermoplastic piping systems.
Klebstoffe für thermoplastische Rohrleitungssysteme - Teil 2: Bestimmung der Scherfestigkeit (ISO 9311-2:2002)
Diese europäische Norm beschreibt ein Verfahren zur Bestimmung der Scherfestigkeit geklebter Fügeverbindungen für thermoplastische Rohrleitungssysteme.
Adhésifs pour réseaux de tuyauteries en matieres thermoplastiques - Partie 2: Détermination de la résistance au cisaillement (ISO 9311-2:2002)
Cette partie de l'EN ISO 9311 décrit une méthode pour la détermination de la résistance au cisaillement de joints constitués d'adhésifs pour réseaux de tuyauteries en matieres thermoplastiques.
Lepila za plastomerne cevne sisteme - 2. del: Določanje strižne trdnosti (ISO 9311-2:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9311-2:2003
01-maj-2003
/HSLOD]DSODVWRPHUQHFHYQHVLVWHPHGHO 'RORþDQMHVWULåQHWUGQRVWL ,62
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength
(ISO 9311-2:2002)
Klebstoffe für thermoplastische Rohrleitungssysteme - Teil 2: Bestimmung der
Scherfestigkeit (ISO 9311-2:2002)
Adhésifs pour réseaux de tuyauteries en matieres thermoplastiques - Partie 2:
Détermination de la résistance au cisaillement (ISO 9311-2:2002)
Ta slovenski standard je istoveten z: EN ISO 9311-2:2002
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
83.180 Lepila Adhesives
SIST EN ISO 9311-2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9311-2:2003
---------------------- Page: 2 ----------------------
SIST EN ISO 9311-2:2003
EUROPEAN STANDARD
EN ISO 9311-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2002
ICS 83.180
English version
Adhesives for thermoplastic piping systems - Part 2:
Determination of shear strength (ISO 9311-2:2002)
Adhésifs pour réseaux de tuyauteries en matières Klebstoffe für thermoplastische Rohrleitungssysteme - Teil
thermoplastiques - Partie 2: Détermination de la résistance 2: Bestimmung der Scherfestigkeit (ISO 9311-2:2002)
au cisaillement (ISO 9311-2:2002)
This European Standard was approved by CEN on 6 April 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9311-2:2002 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9311-2:2003
EN ISO 9311-2:2002 (E)
Contents
page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Principle.5
5 Safety .5
6 Apparatus .5
7 Sampling.5
8 Procedure .6
9 Expression of results .6
10 Test report .7
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9311-2:2003
EN ISO 9311-2:2002 (E)
Foreword
This document (EN ISO 9311-2:2002) has been prepared by Technical Committee CEN/TC 193 "Adhesives", the
secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 61 “Plastics".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by January 2003, and conflicting national standards shall be withdrawn at the latest
by January 2003.
This European Standard is one of a series of standards as listed below :
- prEN ISO 9311-1 Adhesives for thermoplastic piping systems - Part 1 : Determination of film properties
(ISO/FDIS 9311-1:2001).
- prEN ISO 9311-2 Adhesives for thermoplastic piping systems - Part 2 : Determination of shear strength
(ISO/FDIS 9311-2:2001).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9311-2:2003
EN ISO 9311-2:2002 (E)
Introduction
The aim of this European Standard is to describe a method to characteri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.